Pull fscrypt updates from Eric Biggers:

 - Preparations for supporting encryption on ext4 filesystems where the
   filesystem block size is smaller than PAGE_SIZE.

 - Don't allow setting encryption policies on dead directories.

 - Various cleanups.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: document testing with xfstests
  fscrypt: remove selection of CONFIG_CRYPTO_SHA256
  fscrypt: remove unnecessary includes of ratelimit.h
  fscrypt: don't set policy for a dead directory
  ext4: encrypt only up to last block in ext4_bio_write_page()
  ext4: decrypt only the needed block in __ext4_block_zero_page_range()
  ext4: decrypt only the needed blocks in ext4_block_write_begin()
  ext4: clear BH_Uptodate flag on decryption error
  fscrypt: decrypt only the needed blocks in __fscrypt_decrypt_bio()
  fscrypt: support decrypting multiple filesystem blocks per page
  fscrypt: introduce fscrypt_decrypt_block_inplace()
  fscrypt: handle blocksize < PAGE_SIZE in fscrypt_zeroout_range()
  fscrypt: support encrypting multiple filesystem blocks per page
  fscrypt: introduce fscrypt_encrypt_block_inplace()
  fscrypt: clean up some BUG_ON()s in block encryption/decryption
  fscrypt: rename fscrypt_do_page_crypto() to fscrypt_crypt_block()
  fscrypt: remove the "write" part of struct fscrypt_ctx
  fscrypt: simplify bounce page handling

Pull copy_file_range updates from Darrick Wong:
 "This fixes numerous parameter checking problems and inconsistent
  behaviors in the new(ish) copy_file_range system call.

  Now the system call will actually check its range parameters
  correctly; refuse to copy into files for which the caller does not
  have sufficient privileges; update mtime and strip setuid like file
  writes are supposed to do; and allows copying up to the EOF of the
  source file instead of failing the call like we used to.

  Summary:

   - Create a generic copy_file_range handler and make individual
     filesystems responsible for calling it (i.e. no more assuming that
     do_splice_direct will work or is appropriate)

   - Refactor copy_file_range and remap_range parameter checking where
     they are the same

   - Install missing copy_file_range parameter checking(!)

   - Remove suid/sgid and update mtime like any other file write

   - Change the behavior so that a copy range crossing the source file's
     eof will result in a short copy to the source file's eof instead of
     EINVAL

   - Permit filesystems to decide if they want to handle
     cross-superblock copy_file_range in their local handlers"

* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fuse: copy_file_range needs to strip setuid bits and update timestamps
  vfs: allow copy_file_range to copy across devices
  xfs: use file_modified() helper
  vfs: introduce file_modified() helper
  vfs: add missing checks to copy_file_range
  vfs: remove redundant checks from generic_remap_checks()
  vfs: introduce generic_file_rw_checks()
  vfs: no fallback for ->copy_file_range
  vfs: introduce generic_copy_file_range()

Pull iomap updates from Darrick Wong:
 "There are a few fixes for gfs2 but otherwise it's pretty quiet so far.

   - Only mark inode dirty at the end of writing to a file (instead of
     once for every page written).

   - Fix for an accounting error in the page_done callback"

* tag 'iomap-5.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: fix page_done callback for short writes
  fs: fold __generic_write_end back into generic_write_end
  iomap: don't mark the inode dirty in iomap_write_end

Pull ext2, udf and quota updates from Jan Kara:

 - some ext2 fixes and cleanups

 - a fix of udf bug when extending files

 - a fix of quota Q_XGETQSTAT[V] handling

* tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
  ext2: Use kmemdup rather than duplicating its implementation
  quota: honor quota type in Q_XGETQSTAT[V] calls
  ext2: Always brelse bh on failure in ext2_iget()
  ext2: add missing brelse() in ext2_iget()
  ext2: Fix a typo in ext2_getattr argument
  ext2: fix a typo in comment
  ext2: add missing brelse() in ext2_new_inode()
  ext2: optimize ext2_xattr_get()
  ext2: introduce new helper for xattr entry comparison
  ext2: merge xattr next entry check to ext2_xattr_entry_valid()
  ext2: code cleanup for ext2_preread_inode()
  ext2: code cleanup by using test_opt() and clear_opt()
  doc: ext2: update description of quota options for ext2
  ext2: Strengthen xattr block checks
  ext2: Merge loops in ext2_xattr_set()
  ext2: introduce helper for xattr entry validation
  ext2: introduce helper for xattr header validation
  quota: add dqi_dirty_list description to comment of Dquot List Management

Pull fsnotify updates from Jan Kara:
 "This contains cleanups of the fsnotify name removal hook and also a
  patch to disable fanotify permission events for 'proc' filesystem"

* tag 'fsnotify_for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: get rid of fsnotify_nameremove()
  fsnotify: move fsnotify_nameremove() hook out of d_delete()
  configfs: call fsnotify_rmdir() hook
  debugfs: call fsnotify_{unlink,rmdir}() hooks
  debugfs: simplify __debugfs_remove_file()
  devpts: call fsnotify_unlink() hook
  tracefs: call fsnotify_{unlink,rmdir}() hooks
  rpc_pipefs: call fsnotify_{unlink,rmdir}() hooks
  btrfs: call fsnotify_rmdir() hook
  fsnotify: add empty fsnotify_{unlink,rmdir}() hooks
  fanotify: Disallow permission events for proc filesystem

Pull file locking updates from Jeff Layton:
 "Just a couple of small lease-related patches this cycle.

  One from Ira to add a new tracepoint that fires during lease conflict
  checks, and another patch from Amir to reduce false positives when
  checking for lease conflicts"

* tag 'locks-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: eliminate false positive conflicts for write lease
  locks: Add trace_leases_conflict

Revert "Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs"

This reverts merge 0f75ef6a (and thus
effectively commits

   7a1ade84 ("keys: Provide KEYCTL_GRANT_PERMISSION")
   2e12256b ("keys: Replace uid/gid/perm permissions checking with an ACL")

that the merge brought in).

It turns out that it breaks booting with an encrypted volume, and Eric
biggers reports that it also breaks the fscrypt tests [1] and loading of
in-kernel X.509 certificates [2].

The root cause of all the breakage is likely the same, but David Howells
is off email so rather than try to work it out it's getting reverted in
order to not impact the rest of the merge window.

 [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/
 [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/

Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/Reported-by: NEric Biggers <ebiggers@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.

Two particular errors have been observed when extending a file:

1. The final extent is larger than it should be, having been rounded up
   to a multiple of the block size.

B. The final extent is not shorter than it should be, due to not having
   been updated when the file's information length was increased.

[JK: simplified udf_do_extend_final_block(), fixed up some types]

Fixes: 2c948b3f ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.comSigned-off-by: NJan Kara <jack@suse.cz>

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...

Pull printk updates from Petr Mladek:

 - distinguish different legacy clocks again

 - small clean up

* tag 'printk-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Reinstate printing of legacy clock IDs
  vsprintf: fix data type of variable in string_nocheck()

Pull capabilities update from James Morris:
 "Minor fixes for capabilities:

   - Update the commoncap.c code to utilize XATTR_SECURITY_PREFIX_LEN,
     from Carmeli tamir.

   - Make the capability hooks static, from Yue Haibing"

* 'next-lsm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security/commoncap: Use xattr security prefix len
  security: Make capability_hooks static

Pull parisc updates from Helge Deller:
 "Dynamic ftrace support by Sven Schnelle and a header guard fix by
  Denis Efremov"

* 'parisc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: asm: psw.h: missing header guard
  parisc: add dynamic ftrace
  compiler.h: add CC_USING_PATCHABLE_FUNCTION_ENTRY
  parisc: use pr_debug() in kernel/module.c
  parisc: add WARN_ON() to clear_fixmap
  parisc: add spinlock to patch function
  parisc: add support for patching multiple words

Pull x865 kdump updates from Thomas Gleixner:
 "Yet more kexec/kdump updates:

   - Properly support kexec when AMD's memory encryption (SME) is
     enabled

   - Pass reserved e820 ranges to the kexec kernel so both PCI and SME
     can work"

* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fs/proc/vmcore: Enable dumping of encrypted memory when SEV was active
  x86/kexec: Set the C-bit in the identity map page table when SEV is active
  x86/kexec: Do not map kexec area as decrypted when SEV is active
  x86/crash: Add e820 reserved ranges to kdump kernel's e820 table
  x86/mm: Rework ioremap resource mapping determination
  x86/e820, ioport: Add a new I/O resource descriptor IORES_DESC_RESERVED
  x86/mm: Create a workarea in the kernel for SME early encryption
  x86/mm: Identify the end of the kernel area to be reserved

Pull x86 boot updates from Thomas Gleixner:
 "Assorted updates to kexec/kdump:

   - Proper kexec support for 4/5-level paging and jumping from a
     5-level to a 4-level paging kernel.

   - Make the EFI support for kexec/kdump more robust

   - Enforce that the GDT is properly aligned instead of getting the
     alignment by chance"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kdump/64: Restrict kdump kernel reservation to <64TB
  x86/kexec/64: Prevent kexec from 5-level paging to a 4-level only kernel
  x86/boot: Add xloadflags bits to check for 5-level paging support
  x86/boot: Make the GDT 8-byte aligned
  x86/kexec: Add the ACPI NVS region to the ident map
  x86/boot: Call get_rsdp_addr() after console_init()
  Revert "x86/boot: Disable RSDP parsing temporarily"
  x86/boot: Use efi_setup_data for searching RSDP on kexec-ed kernels
  x86/kexec: Add the EFI system tables and ACPI tables to the ident map

Pull perf updates from Ingo Molnar:
 "The main changes in this cycle on the kernel side were:

   - CPU PMU and uncore driver updates to Intel Snow Ridge, IceLake,
     KabyLake, AmberLake and WhiskeyLake CPUs.

   - Rework the MSR probing infrastructure to make it more robust, make
     it work better on virtualized systems and to better expose it on
     sysfs.

   - Rework PMU attributes group support based on the feedback from
     Greg. The core sysfs patch that adds sysfs_update_groups() was
     acked by Greg.

  There's a lot of perf tooling changes as well, all around the place:

   - vendor updates to Intel, cs-etm (ARM), ARM64, s390,

   - various enhancements to Intel PT tooling support:
      - Improve CBR (Core to Bus Ratio) packets support.
      - Export power and ptwrite events to sqlite and postgresql.
      - Add support for decoding PEBS via PT packets.
      - Add support for samples to contain IPC ratio, collecting cycles
        information from CYC packets, showing the IPC info periodically
      - Allow using time ranges

   - lots of updates to perf pmu, perf stat, perf trace, eBPF support,
     perf record, perf diff, etc. - please see the shortlog and Git log
     for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (252 commits)
  tools arch x86: Sync asm/cpufeatures.h with the with the kernel
  tools build: Check if gettid() is available before providing helper
  perf jvmti: Address gcc string overflow warning for strncpy()
  perf python: Remove -fstack-protector-strong if clang doesn't have it
  perf annotate TUI browser: Do not use member from variable within its own initialization
  perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64
  perf evsel: Do not rely on errno values for precise_ip fallback
  perf thread: Allow references to thread objects after machine__exit()
  perf header: Assign proper ff->ph in perf_event__synthesize_features()
  tools arch kvm: Sync kvm headers with the kernel sources
  perf script: Allow specifying the files to process guest samples
  perf tools metric: Don't include duration_time in group
  perf list: Avoid extra : for --raw metrics
  perf vendor events intel: Metric fixes for SKX/CLX
  perf tools: Fix typos / broken sentences
  perf jevents: Add support for Hisi hip08 L3C PMU aliasing
  perf jevents: Add support for Hisi hip08 HHA PMU aliasing
  perf jevents: Add support for Hisi hip08 DDRC PMU aliasing
  perf pmu: Support more complex PMU event aliasing
  perf diff: Documentation -c cycles option
  ...

Pull libata updates from Jens Axboe:
 "These are the changes that are reviewed, tested, and queued up for
  this merge window. This contains:

   - Removal of redundant memset after dmam_alloc_coherent (Fuqian)

   - Expand blacklist check for ST1000LM024, making it independent of
     firmware version (Hans)

   - Request sense fix (Tejun)

   - ahci_sunxi FIFO fix (Uenal)"

* tag 'for-5.3/libata-20190708' of git://git.kernel.dk/linux-block:
  drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs
  libata: Drop firmware version check from the ST1000LM024 quirk
  ata: sata_sil24: Remove call to memset after dmam_alloc_coherent
  ata:sata_qstor: Remove call to memset after dmam_alloc_coherent
  ata: sata_nv: Remove call to memset after dmam_alloc_coherent
  ata: pdc_adma: Remove call to memset after dmam_alloc_coherent
  ata: libahci: Remove call to memset after dmam_alloc_coherent
  ata: acard-ahci: Remove call to memset after dmam_alloc_coherent
  libata: don't request sense data on !ZAC ATA devices

Pull block updates from Jens Axboe:
 "This is the main block updates for 5.3. Nothing earth shattering or
  major in here, just fixes, additions, and improvements all over the
  map. This contains:

   - Series of documentation fixes (Bart)

   - Optimization of the blk-mq ctx get/put (Bart)

   - null_blk removal race condition fix (Bob)

   - req/bio_op() cleanups (Chaitanya)

   - Series cleaning up the segment accounting, and request/bio mapping
     (Christoph)

   - Series cleaning up the page getting/putting for bios (Christoph)

   - block cgroup cleanups and moving it to where it is used (Christoph)

   - block cgroup fixes (Tejun)

   - Series of fixes and improvements to bcache, most notably a write
     deadlock fix (Coly)

   - blk-iolatency STS_AGAIN and accounting fixes (Dennis)

   - Series of improvements and fixes to BFQ (Douglas, Paolo)

   - debugfs_create() return value check removal for drbd (Greg)

   - Use struct_size(), where appropriate (Gustavo)

   - Two lighnvm fixes (Heiner, Geert)

   - MD fixes, including a read balance and corruption fix (Guoqing,
     Marcos, Xiao, Yufen)

   - block opal shadow mbr additions (Jonas, Revanth)

   - sbitmap compare-and-exhange improvemnts (Pavel)

   - Fix for potential bio->bi_size overflow (Ming)

   - NVMe pull requests:
       - improved PCIe suspent support (Keith Busch)
       - error injection support for the admin queue (Akinobu Mita)
       - Fibre Channel discovery improvements (James Smart)
       - tracing improvements including nvmetc tracing support (Minwoo Im)
       - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya
         Kulkarni)"

   - Various little fixes and improvements to drivers and core"

* tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits)
  blk-iolatency: fix STS_AGAIN handling
  block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES
  blk-mq: simplify blk_mq_make_request()
  blk-mq: remove blk_mq_put_ctx()
  sbitmap: Replace cmpxchg with xchg
  block: fix .bi_size overflow
  block: sed-opal: check size of shadow mbr
  block: sed-opal: ioctl for writing to shadow mbr
  block: sed-opal: add ioctl for done-mark of shadow mbr
  block: never take page references for ITER_BVEC
  direct-io: use bio_release_pages in dio_bio_complete
  block_dev: use bio_release_pages in bio_unmap_user
  block_dev: use bio_release_pages in blkdev_bio_end_io
  iomap: use bio_release_pages in iomap_dio_bio_end_io
  block: use bio_release_pages in bio_map_user_iov
  block: use bio_release_pages in bio_unmap_user
  block: optionally mark pages dirty in bio_release_pages
  block: move the BIO_NO_PAGE_REF check into bio_release_pages
  block: skd_main.c: Remove call to memset after dma_alloc_coherent
  block: mtip32xx: Remove call to memset after dma_alloc_coherent
  ...

Pull device properties framework updates from Rafael Wysocki:
 "These add helpers for counting items in a property array and extend
  the "software nodes" support to be more convenient for representing
  device properties supplied by drivers and make the intel_cht_int33fe
  driver use that.

  Specifics:

   - Add helpers to count items in a property array (Andy Shevchenko).

   - Extend "software nodes" support to be more convenient for
     representing device properties supplied by drivers (Heikki
     Krogerus).

   - Add device_find_child_by_name() helper to the driver core (Heikki
     Krogerus).

   - Extend device connection code to also look for references provided
     via fwnode pointers (Heikki Krogerus).

   - Start to register proper struct device objects for USB Type-C muxes
     and orientation switches (Heikki Krogerus).

   - Update the intel_cht_int33fe driver to describe devices in a more
     general way with the help of "software nodes" (Heikki Krogerus)"

* tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Add helpers to count items in an array
  platform/x86: intel_cht_int33fe: Replacing the old connections with references
  platform/x86: intel_cht_int33fe: Supply fwnodes for the external dependencies
  platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector
  platform/x86: intel_cht_int33fe: Provide software nodes for the devices
  platform/x86: intel_cht_int33fe: Remove unused fusb302 device property
  platform/x86: intel_cht_int33fe: Register max17047 in its own function
  usb: typec: Registering real device entries for the muxes
  device connection: Find connections also by checking the references
  device property: Introduce fwnode_find_reference()
  ACPI / property: Don't limit named child node matching to data nodes
  driver core: Add helper device_find_child_by_name()
  software node: Add software_node_get_reference_args()
  software node: Use kobject name when finding child nodes by name
  software node: Add support for static node descriptors
  software node: Simplify software_node_release() function
  software node: Allow node creation without properties

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20190703, fix up the handling of GPEs in ACPICA, allow some more ACPI
  code to be built on ARM64 platforms, allow BGRT to be overridden, fix
  minor issues and clean up assorted pieces of ACPI code.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190703
     including:
       - Initial/default namespace creation simplification (Bob Moore).
       - Object initialization sequence update (Bob Moore).
       - Removal of legacy module-level (dead) code (Erik Schmauss).
       - Table load object initialization update (Erik Schmauss,
         Nikolaus Voss).

   - Fix GPE enabling issue in ACPICA causing premature wakeups from
     suspend-to-idle to occur (Rafael Wysocki).

   - Allow ACPI AC and battery drivers to be built on non-X86 (Ard
     Biesheuvel).

   - Fix address space handler removal in the ACPI PMIC driver for Intel
     platforms (Andy Shevchenko).

   - Allow BGRT to be overridden via initrd or configfs (Andrea
     Oliveri).

   - Fix object resolution on table loads via configfs (Nikolaus Voss).

   - Clean up assorted pieces of ACPI code and tools (Colin Ian King,
     Liguang Zhang, Masahiro Yamada).

   - Fix documentation build warning, convert the extcon document to
     ReST and add it to the ACPI documentation (Mauro Carvalho Chehab,
     Qian Cai)"

* tag 'acpi-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: Remove needless __ghes_check_estatus() calls
  ACPICA: Update version to 20190703
  ACPICA: Update table load object initialization
  ACPICA: Update for object initialization sequence
  ACPICA: remove legacy module-level code due to deprecation
  ACPICA: Namespace: simplify creation of the initial/default namespace
  ACPI / PMIC: intel: Drop double removal of address space handler
  ACPI: APD: remove redundant assignment to pointer clk
  docs: extcon: convert it to ReST and move to ACPI dir
  ACPI: Make AC and battery drivers available on !X86
  ACPICA: Clear status of GPEs on first direct enable
  ACPI: configfs: Resolve objects on host-directed table loads
  ACPI: tables: Allow BGRT to be overridden
  ACPI: OSL: Make a W=1 kernel-doc warning go away
  ACPI: tools: Exclude tools/* from .gitignore patterns

Pull power management updates from Rafael Wysocki:
 "These update PCI and ACPI power management (improved handling of ACPI
  power resources and PCIe link delays, fixes related to corner cases,
  hibernation handling rework), fix and extend the operating performance
  points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
  imx8m chips, update some other cpufreq drivers, clean up assorted
  pieces of PM code and documentation and update tools.

  Specifics:

   - Improve the handling of shared ACPI power resources in the PCI bus
     type layer (Mika Westerberg).

   - Make the PCI layer take link delays required by the PCIe spec into
     account as appropriate and avoid polling devices in D3cold for PME
     (Mika Westerberg).

   - Fix some corner case issues in ACPI device power management and in
     the PCI bus type layer, optimiza and clean up the handling of
     runtime-suspended PCI devices during system-wide transitions to
     sleep states (Rafael Wysocki).

   - Rework hibernation handling in the ACPI core and the PCI bus type
     to resume runtime-suspended devices before hibernation (which
     allows some functional problems to be avoided) and fix some ACPI
     power management issues related to hiberation (Rafael Wysocki).

   - Extend the operating performance points (OPP) framework to support
     a wider range of devices (Rajendra Nayak, Stehpen Boyd).

   - Fix issues related to genpd_virt_devs and issues with platforms
     using the set_opp() callback in the OPP framework (Viresh Kumar,
     Dmitry Osipenko).

   - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).

   - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).

   - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
     armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
     Chmiel, YueHaibing).

   - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).

   - Fix minor issue in the ACPI system sleep support code and export
     one function from it (Lenny Szubowicz, Dexuan Cui).

   - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
     Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
     Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).

   - Update the pm-graph utility to v5.4 (Todd Brandt).

   - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"

* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Unexport acpi_device_get_power()
  Documentation: ABI: power: Add missing newline at end of file
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  cpufreq: Don't skip frequency validation for has_target() drivers
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  cpufreq: Use has_target() instead of !setpolicy
  ...

Pull sound updates from Takashi Iwai:
 "Many updates in this development cycle are found in ASoC where it got
  a wide range of changes for the continued refactoring.

  Some highlights are below.

  ASoC:

   - Continued refactoring work by Morimoto-san toward the full
     componentization; the changes are seen allover the places

   - Support for force disconnecting muxes in DAPM

   - Continued development of ASoC Intel SOF stuff

   - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
     CX2072X, Realtek RT1011 and RT1308

  HD-audio:

   - More fixes and adjustments for ASoC SOF HD-audio

   - Fix for resume problem on some Realtek codecs

  USB-audio:

   - A few fixes for the issues reported by syzbot USB fuzzer

   - Fix for UAC2 extension unit parser

   - Quirks for Line6 Helix, Emgaic Unitor 8

  FireWire:

   - Lots of code refactoring and fixes in most of its components"

* tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (626 commits)
  ALSA: firewire-lib: code refactoring for local variables
  ALSA: firewire-lib: code refactoring for post operation to data block counter
  ALSA: firewire-lib: code refactoring for error path of parser for CIP header
  ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet
  ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT
  ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER
  ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events
  ALSA: usb-audio: fix Line6 Helix audio format rates
  firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface
  ASoC: SOF: Intel: implement runtime idle for CNL/APL
  ASoC: SOF: add runtime idle callback
  ASoC: hdac_hdmi: report codec link up/down status to bus
  ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write()
  ASoC: sunxi: sun50i-codec-analog: Add earpiece
  ASoC: rt5665: remove redundant assignment to variable idx
  ...

Pull fbdev updates from Bartlomiej Zolnierkiewicz:

 - remove fbdev notifier usage for fbcon (as prep work to clean up the
   fbcon locking), add locking checks in vt/console code and make
   assorted cleanups in fbdev and backlight code (Daniel Vetter)

 - add COMPILE_TEST support to atmel_lcdfb, da8xx-fb, gbefb, imxfb,
   pvr2fb and pxa168fb drivers (me)

 - fix DMA API abuse in au1200fb and jz4740_fb drivers (Christoph
   Hellwig)

 - add check for new BGRT status field rotation bits in efifb driver
   (Hans de Goede)

 - mark expected switch fall-throughs in s3c-fb driver (Gustavo A. R.
   Silva)

 - remove fbdev mxsfb driver in favour of the drm version (Fabio
   Estevam)

 - remove broken rfbi code from omap2fb driver (me)

 - misc fixes (Arnd Bergmann, Shobhit Kukreti, Wei Yongjun, me)

 - misc cleanups (Gustavo A. R. Silva, Colin Ian King, me)

* tag 'fbdev-v5.3' of git://github.com/bzolnier/linux: (62 commits)
  video: fbdev: imxfb: fix a typo in imxfb_probe()
  video: fbdev: s3c-fb: Mark expected switch fall-throughs
  video: fbdev: s3c-fb: fix sparse warnings about using incorrect types
  video: fbdev: don't print error message on framebuffer_alloc() failure
  video: fbdev: intelfb: return -ENOMEM on framebuffer_alloc() failure
  video: fbdev: s3c-fb: return -ENOMEM on framebuffer_alloc() failure
  vga_switcheroo: Depend upon fbcon being built-in, if enabled
  video: fbdev: omap2: remove rfbi
  video: fbdev: atmel_lcdfb: remove redundant initialization to variable ret
  video: fbdev-MMP: Use struct_size() in devm_kzalloc()
  video: fbdev: controlfb: fix warnings about comparing pointer to 0
  efifb: BGRT: Add check for new BGRT status field rotation bits
  jz4740_fb: fix DMA API abuse
  video: fbdev: pvr2fb: fix link error for pvr2fb_pci_exit
  video: fbdev: s3c-fb: add COMPILE_TEST support
  video: fbdev: imxfb: fix sparse warnings about using incorrect types
  video: fbdev: pvr2fb: fix build warning when compiling as module
  fbcon: Export fbcon_update_vcs
  backlight: simplify lcd notifier
  staging/olpc_dcon: Add drm conversion to TODO
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new Atmel microship ISC driver

 - coda has gained support for mpeg2 and mpeg4

 - cxusb gained support for analog TV

 - rockchip staging driver was split into two separate staging drivers

 - added a new staging driver for Allegro DVT video IP core

 - added a new staging driver for Amlogic Meson video decoder

 - lots of improvements and cleanups

* tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits)
  media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs
  media: doc-rst: Fix typos
  media: radio-raremono: change devm_k*alloc to k*alloc
  media: stv0297: fix frequency range limit
  media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes
  media: dvb_frontend: split dvb_frontend_handle_ioctl function
  media: mceusb: disable "nonsensical irdata" messages
  media: rc: remove redundant dev_err message
  media: cec-notifier: add new notifier functions
  media: cec: add struct cec_connector_info support
  media: cec-notifier: rename variables, check kstrdup and n->conn_name
  media: MAINTAINERS: Add maintainers for Media Controller
  media: staging: media: tegra-vde: Defer dmabuf's unmapping
  media: staging: media: tegra-vde: Add IOMMU support
  media: hdpvr: fix locking and a missing msleep
  media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
  media: atmel: atmel-isc: fix i386 build error
  media: v4l2-ctrl: Move compound control initialization
  media: hantro: Use vb2_get_buffer
  media: pci: cx88: Change the type of 'missed' to u64
  ...

Pull EDAC updates from Tony Luck:
 "All the bits that Boris had queued in his tree plus four patches to
  add support for Intel Icelake Xeon and then fix a few corner cases"

* tag 'please-pull-for_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
  EDAC, skx, i10nm: Fix source ID register offset
  EDAC, i10nm: Check ECC enabling status per channel
  EDAC, i10nm: Add Intel additional Ice-Lake support
  EDAC: Make edac_debugfs_create_x*() return void
  EDAC/aspeed: Remove set but not used variable 'np'
  EDAC/ie31200: Reformat PCI device table
  EDAC/ie31200: Add Intel Coffee Lake CPU support
  EDAC/sifive: Add EDAC platform driver for SiFive SoCs
  EDAC/sb_edac: Remove redundant update of tad_base
  arm64: dts: stratix10: Add SDMMC EDAC node
  EDAC/altera: Add Stratix10 SDMMC support
  arm64: dts: stratix10: Add OCRAM EDAC node
  EDAC/altera: Add Stratix10 OCRAM ECC support
  EDAC/sysfs: Drop device references properly
  EDAC/sysfs: Fix memory leak when creating a csrow object

Pull iommu updates from Joerg Roedel:

 - Make the dma-iommu code more generic so that it can be used outside
   of the ARM context with other IOMMU drivers. Goal is to make use of
   it on x86 too.

 - Generic IOMMU domain support for the Intel VT-d driver. This driver
   now makes more use of common IOMMU code to allocate default domains
   for the devices it handles.

 - An IOMMU fault reporting API to userspace. With that the IOMMU fault
   handling can be done in user-space, for example to forward the faults
   to a VM.

 - Better handling for reserved regions requested by the firmware. These
   can be 'relaxed' now, meaning that those don't prevent a device being
   attached to a VM.

 - Suspend/Resume support for the Renesas IOMMU driver.

 - Added support for dumping SVA related fields of the DMAR table in the
   Intel VT-d driver via debugfs.

 - A pile of smaller fixes and cleanups.

* tag 'iommu-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (90 commits)
  iommu/omap: No need to check return value of debugfs_create functions
  iommu/arm-smmu-v3: Invalidate ATC when detaching a device
  iommu/arm-smmu-v3: Fix compilation when CONFIG_CMA=n
  iommu/vt-d: Cleanup unused variable
  iommu/amd: Flush not present cache in iommu_map_page
  iommu/amd: Only free resources once on init error
  iommu/amd: Move gart fallback to amd_iommu_init
  iommu/amd: Make iommu_disable safer
  iommu/io-pgtable: Support non-coherent page tables
  iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flag
  iommu/io-pgtable-arm: Add support to use system cache
  iommu/arm-smmu-v3: Increase maximum size of queues
  iommu/vt-d: Silence a variable set but not used
  iommu/vt-d: Remove an unused variable "length"
  iommu: Fix integer truncation
  iommu: Add padding to struct iommu_fault
  iommu/vt-d: Consolidate domain_init() to avoid duplication
  iommu/vt-d: Cleanup after delegating DMA domain to generic iommu
  iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()
  iommu/vt-d: Allow DMA domain attaching to rmrr locked device
  ...

Pull spi updates from Mark Brown:
 "For the most part this is a quiet release for SPI, though there's
  several of the more widely used drivers that have had some fairly
  substantial development done on them, mainly improving performance and
  adding support for some more obscure use cases.

  Summary:

   - Support for configuring a minimum time for chip select to be
     deasserted between transfers from Martin Sperl.

   - A rework of the ACPI device instantiation code from Ard Biesheuvel.

   - Fairly substantial development on the AT91 USART, BCM2835 and
     Tegra114 drivers.

   - New driver for Socionext SynQuacer"

* tag 'spi-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
  spi: pxa2xx: Add support for Intel Elkhart Lake
  spi: atmel-quadspi: fix resume call
  spi: atmel-quadspi: void return type for atmel_qspi_init()
  spi: pxa2xx: Set minimum transfer speed
  spi: stm32-qspi: remove signal sensitive on completion
  dt-bindings: spi: stm32-qspi: add dma properties
  spi: uniphier: fix zero-length transfer
  spi: uniphier: fix timeout error
  spi/acpi: avoid spurious matches during slave enumeration
  spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage
  spi: fix ctrl->num_chipselect constraint
  spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series
  spi/acpi: fix incorrect ACPI parent check
  spi: don't open code list_for_each_entry_safe_reverse()
  spi: No need to assign dummy value in spi_unregister_controller()
  spi: Add a prototype for exported spi_set_cs_timing()
  spi/acpi: enumerate all SPI slaves in the namespace
  spi: qup: fix PIO/DMA transfers.
  spi: Use struct_size() helper
  spi: mediatek: add SPI_LSB_FIRST support
  ...

Pull regulator updates from Mark Brown:
 "A couple of new features in the core, the most interesting one being
  support for complex regulator coupling configurations initially
  targeted at nVidia Tegra SoCs, and some new drivers but otherwise
  quite a quiet release.

  Summary:

   - Core support for gradual ramping of voltages for devices that can't
     manage large changes in hardware from Bartosz Golaszewski.

   - Core support for systems that have complex coupling requirements
     best described via code, contributed by Dmitry Osipenko.

   - New drivers for Dialog SLG51000, Qualcomm PM8005 and ST
     Microelectronics STM32-Booster"

* tag 'regulator-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
  regulator: max77650: use vsel_step
  regulator: implement selector stepping
  regulator: max77650: add MODULE_ALIAS()
  regulator: max77620: remove redundant assignment to variable ret
  dt-bindings: regulator: add support for the stm32-booster
  regulator: add support for the stm32-booster
  regulator: s2mps11: Adjust supported buck voltages to real values
  regulator: s2mps11: Fix buck7 and buck8 wrong voltages
  gpio: Fix return value mismatch of function gpiod_get_from_of_node()
  regulator: core: Expose some of core functions needed by couplers
  regulator: core: Introduce API for regulators coupling customization
  regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspend
  regulator: s2mps11: Reduce number of rdev_get_id() calls
  regulator: qcom_spmi: Do NULL check for lvs
  regulator: qcom_spmi: Fix math of spmi_regulator_set_voltage_time_sel
  regulator: da9061/62: Adjust LDO voltage selection minimum value
  regulator: s2mps11: Fix ERR_PTR dereference on GPIO lookup failure
  regulator: qcom_spmi: add PMS405 SPMI regulator
  dt-bindings: qcom_spmi: Document pms405 support
  arm64: dts: msm8998-mtp: Add pm8005_s1 regulator
  ...

Pull regmap updates from Mark Brown:
 "This is a relatively busy release for regmap, though not busy in the
  grand scheme of things, with the addition of support for I3C from
  Vitor Soares and a few small fixes and cleanups"

* tag 'regmap-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: select CONFIG_REGMAP while REGMAP_SCCB is set
  regmap: lzo: Switch to bitmap_zalloc()
  regmap: fix bulk writes on paged registers
  regmap: add i3c bus support
  regmap: debugfs: Fix memory leak in regmap_debugfs_init

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...

Pull ic3 updates from Boris Brezillon:

 - Drop support for 10-bit I2C addresses

 - Add support for limited bus mode

 - Fix the Cadence DT binding doc

 - Use struct_size() to allocate a DEFSLVS packet

* tag 'i3c/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: Use struct_size() helper
  dt-bindings: i3c: cdns: Use correct cells for I2C device
  i3c: dw: add limited bus mode support
  i3c: add mixed limited bus mode
  i3c: fix i2c and i3c scl rate by bus mode
  dt-bindings: i3c: Document dropped support for I2C 10 bit devices
  i3c: Drop support for I2C 10 bit addresing

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - Add a new LED common module for ti-lmu driver family

 - Modify MFD ti-lmu bindings
        - add ti,brightness-resolution
        - add the ramp up/down property

 - Add regulator support for LM36274 driver to lm363x-regulator.c

 - New LED class drivers with DT bindings:
        - leds-spi-byte
        - leds-lm36274
        - leds-lm3697 (move the support from MFD to LED subsystem)

 - Simplify getting the I2C adapter of a client:
        - leds-tca6507
        - leds-pca955x

 - Convert LED documentation to ReST

* tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt
  docs: leds: convert to ReST
  leds: leds-tca6507: simplify getting the adapter of a client
  leds: leds-pca955x: simplify getting the adapter of a client
  leds: lm36274: Introduce the TI LM36274 LED driver
  dt-bindings: leds: Add LED bindings for the LM36274
  regulator: lm363x: Add support for LM36274
  mfd: ti-lmu: Add LM36274 support to the ti-lmu
  dt-bindings: mfd: Add lm36274 bindings to ti-lmu
  leds: max77650: Remove set but not used variable 'parent'
  leds: avoid flush_work in atomic context
  leds: lm3697: Introduce the lm3697 driver
  mfd: ti-lmu: Remove support for LM3697
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  leds: TI LMU: Add common code for TI LMU devices
  leds: spi-byte: add single byte SPI LED driver
  dt-bindings: leds: Add binding for spi-byte LED.
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  dt-bindings: mfd: LMU: Add the ramp up/down property

Merge tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set of changes contains a new driver for SiFive SoCs as well as
  enhancements to the core (device links are used to track dependencies
  between PWM providers and consumers, support for PWM controllers via
  ACPI, sysfs will now suspend/resume PWMs that it has claimed) and
  various existing drivers"

* tag 'pwm/for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
  pwm: fsl-ftm: Make sure to unlock mutex on failure
  pwm: fsl-ftm: Use write protection for prescaler & polarity
  pwm: fsl-ftm: More relaxed permissions for updating period
  pwm: atmel-hlcdc: Add compatible for SAM9X60 HLCDC's PWM
  pwm: bcm2835: Improve precision of PWM
  leds: pwm: Support ACPI via firmware-node framework
  pwm: Add support referencing PWMs from ACPI
  pwm: rcar: Remove suspend/resume support
  pwm: sysfs: Add suspend/resume support
  pwm: Add power management descriptions
  pwm: meson: Add documentation to the driver
  pwm: meson: Add support PWM_POLARITY_INVERSED when disabling
  pwm: meson: Don't cache struct pwm_state internally
  pwm: meson: Read the full hardware state in meson_pwm_get_state()
  pwm: meson: Simplify the calculation of the pre-divider and count
  pwm: meson: Move pwm_set_chip_data() to meson_pwm_request()
  pwm: meson: Add the per-channel register offsets and bits in a struct
  pwm: meson: Add the meson_pwm_channel data to struct meson_pwm
  pwm: meson: Pass struct pwm_device to meson_pwm_calc()
  pwm: meson: Don't duplicate the polarity internally
  ...

Merge tag 'perf-urgent-for-mingo-5.3-20190708-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

core:

  Arnaldo Carvalho de Melo:

  - Allow references to thread objects after__machine_exit(), fixing a bug with
    'perf sched lat' where that happens, i.e. after perf_session__delete() we
    still have references to threads that were in a linked list whose head was
    freed in perf_session__delete(), causing a segfault, fix it.

  Jiri Olsa:

  - Do not rely on errno values for precise_ip fallback, fixing the default
    use case for 'perf record' on some AMD servers, when no events are specified
    and we try to use "cycles:P", i.e. with the maximum precision level.

BPF:

  Song Liu:

  - Assign proper ff->ph in perf_event__synthesize_features(), fixing a bug
    when using pipe mode, i.e.  'perf record -o -'.

tools headers:

  Arnaldo Carvalho de Melo:

  - Sync kvm headers with the kernel sources

perf tests:

  Seeteena Thoufeek:

  - Fix record+probe_libc_inet_pton.sh for powerpc64, where without the
    debuginfo package for the 'ping' utility we can't resolve its symbols,
    so admit getting "[unknown]" for that backtrace line.

perf python:

  Arnaldo Carvalho de Melo:

  - Remove -fstack-protector-strong if clang doesn't have it, fixing the build
    with clang on fedora:30, oracleline:7, centos:7.

perf jvmti:

  Jiri Olsa:

  - Address gcc string overflow warning for strncpy()

build:

  Arnaldo Carvalho de Melo:

  - Check if gettid() is available before providing helper, as recent
    versions of glibc started to provide gettid().
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

Pull cgroup updates from Tejun Heo:
 "Documentation updates and the addition of cgroup_parse_float() which
  will be used by new controllers including blk-iocost"

* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: convert docs to ReST and rename to *.rst
  cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS
  cgroup: add cgroup_parse_float()

Pull workqueue updates from Tejun Heo:
 "Just a couple cleanup patches.  No functional changes."

* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Remove GPF argument from alloc_workqueue_attrs()
  workqueue: Make alloc/apply/free_workqueue_attrs() static

Pull ARM updates from Russell King:

 - Add a "cut here" to make it clearer where oops dumps should be cut
   from - we already have a marker for the end of the dumps.

 - Add logging severity to show_pte()

 - Drop unnecessary common-page-size linker flag

 - Errata workarounds for Cortex A12 857271, Cortex A17 857272 and
   Cortex A7 814220.

 - Remove some unused variables that had started to provoke a compiler
   warning.

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8863/1: stm32: select ARM errata 814220
  ARM: 8862/1: errata: 814220-B-Cache maintenance by set/way operations can execute out of order
  ARM: 8865/1: mm: remove unused variables
  ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores
  ARM: 8861/1: errata: Workaround errata A12 857271 / A17 857272
  ARM: 8860/1: VDSO: Drop implicit common-page-size linker flag
  ARM: arrange show_pte() to issue severity-based messages
  ARM: add "8<--- cut here ---" to kernel dumps

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity updates from Mimi Zohar:
 "Bug fixes, code clean up, and new features:

   - IMA policy rules can be defined in terms of LSM labels, making the
     IMA policy dependent on LSM policy label changes, in particular LSM
     label deletions. The new environment, in which IMA-appraisal is
     being used, frequently updates the LSM policy and permits LSM label
     deletions.

   - Prevent an mmap'ed shared file opened for write from also being
     mmap'ed execute. In the long term, making this and other similar
     changes at the VFS layer would be preferable.

   - The IMA per policy rule template format support is needed for a
     couple of new/proposed features (eg. kexec boot command line
     measurement, appended signatures, and VFS provided file hashes).

   - Other than the "boot-aggregate" record in the IMA measuremeent
     list, all other measurements are of file data. Measuring and
     storing the kexec boot command line in the IMA measurement list is
     the first buffer based measurement included in the measurement
     list"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  integrity: Introduce struct evm_xattr
  ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition
  KEXEC: Call ima_kexec_cmdline to measure the boot command line args
  IMA: Define a new template field buf
  IMA: Define a new hook to measure the kexec boot command line arguments
  IMA: support for per policy rule template formats
  integrity: Fix __integrity_init_keyring() section mismatch
  ima: Use designated initializers for struct ima_event_data
  ima: use the lsm policy update notifier
  LSM: switch to blocking policy update notifiers
  x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY
  ima: Make arch_policy_entry static
  ima: prevent a file already mmap'ed write to be mmap'ed execute
  x86/ima: check EFI SetupMode too

Pull keyring ACL support from David Howells:
 "This changes the permissions model used by keys and keyrings to be
  based on an internal ACL by the following means:

   - Replace the permissions mask internally with an ACL that contains a
     list of ACEs, each with a specific subject with a permissions mask.
     Potted default ACLs are available for new keys and keyrings.

     ACE subjects can be macroised to indicate the UID and GID specified
     on the key (which remain). Future commits will be able to add
     additional subject types, such as specific UIDs or domain
     tags/namespaces.

     Also split a number of permissions to give finer control. Examples
     include splitting the revocation permit from the change-attributes
     permit, thereby allowing someone to be granted permission to revoke
     a key without allowing them to change the owner; also the ability
     to join a keyring is split from the ability to link to it, thereby
     stopping a process accessing a keyring by joining it and thus
     acquiring use of possessor permits.

   - Provide a keyctl to allow the granting or denial of one or more
     permits to a specific subject. Direct access to the ACL is not
     granted, and the ACL cannot be viewed"

* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys: Provide KEYCTL_GRANT_PERMISSION
  keys: Replace uid/gid/perm permissions checking with an ACL