Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 04 12月, 2018 13 次提交
    • E
      net/mlx4_en: Change min MTU size to ETH_MIN_MTU · 24be19e4
      由 Eran Ben Elisha 提交于 
      NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5 ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      24be19e4
    • Q
      net/core: tidy up an error message · bf29e9e9
      由 Qian Cai 提交于 
      netif_napi_add() could report an error like this below due to it allows
to pass a format string for wildcarding before calling
dev_get_valid_name(),

"netif_napi_add() called with weight 256 on device eth%d"

For example, hns_enet_drv module does this.

hns_nic_try_get_ae
  hns_nic_init_ring_data
    netif_napi_add
  register_netdev
    dev_get_valid_name

Hence, make it a bit more human-readable by using netdev_err_once()
instead.
Signed-off-by: NQian Cai <cai@gmx.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bf29e9e9
    • A
      mv88e6060: disable hardware level MAC learning · a7451560
      由 Anderson Luiz Alves 提交于 
      Disable hardware level MAC learning because it breaks station roaming.
When enabled it drops all frames that arrive from a MAC address
that is on a different port at learning table.
Signed-off-by: NAnderson Luiz Alves <alacn1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a7451560
    • M
      macvlan: return correct error value · 59f997b0
      由 Matteo Croce 提交于 
      A MAC address must be unique among all the macvlan devices with the same
lower device. The only exception is the passthru [sic] mode,
which shares the lower device address.

When duplicate addresses are detected, EBUSY is returned when bringing
the interface up:

    # ip link add macvlan0 link eth0 type macvlan
    # read addr </sys/class/net/eth0/address
    # ip link set macvlan0 address $addr
    # ip link set macvlan0 up
    RTNETLINK answers: Device or resource busy

Use correct error code which is EADDRINUSE, and do the check also
earlier, on address change:

    # ip link set macvlan0 address $addr
    RTNETLINK answers: Address already in use
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      59f997b0
    • X
      sctp: kfree_rcu asoc · fb6df5a6
      由 Xin Long 提交于 
      In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.

This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.

Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.

Thanks Neil and Marcelo to make this clear.

Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes: cd2b7087 ("sctp: check duplicate node before inserting a new transport")
Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com
Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com
Suggested-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fb6df5a6
    • T
      net/ibmvnic: Fix RTNL deadlock during device reset · 986103e7
      由 Thomas Falcon 提交于 
      Commit a5681e20 ("net/ibmnvic: Fix deadlock problem
in reset") made the change to hold the RTNL lock during
driver reset but still calls netdev_notify_peers, which
results in a deadlock. Instead, use call_netdevice_notifiers,
which is functionally the same except that it does not
take the RTNL lock again.

Fixes: a5681e20 ("net/ibmnvic: Fix deadlock problem in reset")
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      986103e7
    • J
      vhost: fix IOTLB locking · e3f78718
      由 Jean-Philippe Brucker 提交于 
      Commit 78139c94 ("net: vhost: lock the vqs one by one") moved the vq
lock to improve scalability, but introduced a possible deadlock in
vhost-iotlb. vhost_iotlb_notify_vq() now takes vq->mutex while holding
the device's IOTLB spinlock. And on the vhost_iotlb_miss() path, the
spinlock is taken while holding vq->mutex.

Since calling vhost_poll_queue() doesn't require any lock, avoid the
deadlock by not taking vq->mutex.

Fixes: 78139c94 ("net: vhost: lock the vqs one by one")
Acked-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3f78718
    • D
      Merge branch 'phy-micrel-toggling-reset' · 4763c9f9
      由 David S. Miller 提交于 
      Yoshihiro Shimoda says:

====================
net: phy: micrel: add toggling phy reset

This patch set is for R-Car Gen3 Salvator-XS boards. If we do
the following method, the phy cannot link up correctly.

 1) Kernel boots by using initramfs.
 --> No open the nic, so phy_device_register() and phy_probe()
     deasserts the reset.
 2) Kernel enters the suspend.
 --> So, keep the reset signal as deassert.
 --> On R-Car Salvator-XS board, unfortunately, the board power is
     turned off.
 3) Kernel returns from suspend.
 4) ifconfig eth0 up
 --> Then, since edge signal of the reset doesn't happen,
     it cannot link up.
 5) ifconfig eth0 down
 6) ifconfig eth0 up
 --> In this case, it can link up.

When resolving this issue after I got feedback from Andrew and Heiner,
I found an issue that the phy_device.c didn't call phy_resume()
if the PHY was not attached. So, patch 1 fixes it and add toggling
the phy reset to the micrel phy driver.

Changes from v1 (as RFC):
 - No remove the current code of phy_device.c to avoid any side effects.
 - Fix the mdio_bus_phy_resume() in phy_device.c.
 - Add toggling the phy reset in micrel.c if the PHY is not attached.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4763c9f9
    • Y
      net: phy: micrel: add toggling phy reset if PHY is not attached · 8c85f4b8
      由 Yoshihiro Shimoda 提交于 
      This patch adds toggling phy reset if PHY is not attached. Otherwise,
some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if
we do the following method:

 1) Kernel boots by using initramfs.
 --> No open the nic, so phy_device_register() and phy_probe()
     deasserts the reset.
 2) Kernel enters the suspend.
 --> So, keep the reset signal as deassert.
 --> On R-Car Salvator-XS board, unfortunately, the board power is
     turned off.
 3) Kernel returns from suspend.
 4) ifconfig eth0 up
 --> Then, since edge signal of the reset doesn't happen,
     it cannot link up.
 5) ifconfig eth0 down
 6) ifconfig eth0 up
 --> In this case, it can link up.
Reported-by: NHiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8c85f4b8
    • Y
      net: phy: Fix not to call phy_resume() if PHY is not attached · ef1b5bf5
      由 Yoshihiro Shimoda 提交于 
      This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.

Fixes: 803dd9c7 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ef1b5bf5
    • P
      tun: remove skb access after netif_receive_skb · 4e4b08e5
      由 Prashant Bhole 提交于 
      In tun.c skb->len was accessed while doing stats accounting after a
call to netif_receive_skb. We can not access skb after this call
because buffers may be dropped.

The fix for this bug would be to store skb->len in local variable and
then use it after netif_receive_skb(). IMO using xdp data size for
accounting bytes will be better because input for tun_xdp_one() is
xdp_buff.

Hence this patch:
- fixes a bug by removing skb access after netif_receive_skb()
- uses xdp data size for accounting bytes

[613.019057] BUG: KASAN: use-after-free in tun_sendmsg+0x77c/0xc50 [tun]
[613.021062] Read of size 4 at addr ffff8881da9ab7c0 by task vhost-1115/1155
[613.023073]
[613.024003] CPU: 0 PID: 1155 Comm: vhost-1115 Not tainted 4.20.0-rc3-vm+ #232
[613.026029] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[613.029116] Call Trace:
[613.031145]  dump_stack+0x5b/0x90
[613.032219]  print_address_description+0x6c/0x23c
[613.034156]  ? tun_sendmsg+0x77c/0xc50 [tun]
[613.036141]  kasan_report.cold.5+0x241/0x308
[613.038125]  tun_sendmsg+0x77c/0xc50 [tun]
[613.040109]  ? tun_get_user+0x1960/0x1960 [tun]
[613.042094]  ? __isolate_free_page+0x270/0x270
[613.045173]  vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.047127]  ? peek_head_len.part.13+0x90/0x90 [vhost_net]
[613.049096]  ? get_tx_bufs+0x5a/0x2c0 [vhost_net]
[613.051106]  ? vhost_enable_notify+0x2d8/0x420 [vhost]
[613.053139]  handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.053139]  ? vhost_net_buf_peek+0x340/0x340 [vhost_net]
[613.053139]  ? __mutex_lock+0x8d9/0xb30
[613.053139]  ? finish_task_switch+0x8f/0x3f0
[613.053139]  ? handle_tx+0x32/0x120 [vhost_net]
[613.053139]  ? mutex_trylock+0x110/0x110
[613.053139]  ? finish_task_switch+0xcf/0x3f0
[613.053139]  ? finish_task_switch+0x240/0x3f0
[613.053139]  ? __switch_to_asm+0x34/0x70
[613.053139]  ? __switch_to_asm+0x40/0x70
[613.053139]  ? __schedule+0x506/0xf10
[613.053139]  handle_tx+0xc7/0x120 [vhost_net]
[613.053139]  vhost_worker+0x166/0x200 [vhost]
[613.053139]  ? vhost_dev_init+0x580/0x580 [vhost]
[613.053139]  ? __kthread_parkme+0x77/0x90
[613.053139]  ? vhost_dev_init+0x580/0x580 [vhost]
[613.053139]  kthread+0x1b1/0x1d0
[613.053139]  ? kthread_park+0xb0/0xb0
[613.053139]  ret_from_fork+0x35/0x40
[613.088705]
[613.088705] Allocated by task 1155:
[613.088705]  kasan_kmalloc+0xbf/0xe0
[613.088705]  kmem_cache_alloc+0xdc/0x220
[613.088705]  __build_skb+0x2a/0x160
[613.088705]  build_skb+0x14/0xc0
[613.088705]  tun_sendmsg+0x4f0/0xc50 [tun]
[613.088705]  vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.088705]  handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.088705]  handle_tx+0xc7/0x120 [vhost_net]
[613.088705]  vhost_worker+0x166/0x200 [vhost]
[613.088705]  kthread+0x1b1/0x1d0
[613.088705]  ret_from_fork+0x35/0x40
[613.088705]
[613.088705] Freed by task 1155:
[613.088705]  __kasan_slab_free+0x12e/0x180
[613.088705]  kmem_cache_free+0xa0/0x230
[613.088705]  ip6_mc_input+0x40f/0x5a0
[613.088705]  ipv6_rcv+0xc9/0x1e0
[613.088705]  __netif_receive_skb_one_core+0xc1/0x100
[613.088705]  netif_receive_skb_internal+0xc4/0x270
[613.088705]  br_pass_frame_up+0x2b9/0x2e0
[613.088705]  br_handle_frame_finish+0x2fb/0x7a0
[613.088705]  br_handle_frame+0x30f/0x6c0
[613.088705]  __netif_receive_skb_core+0x61a/0x15b0
[613.088705]  __netif_receive_skb_one_core+0x8e/0x100
[613.088705]  netif_receive_skb_internal+0xc4/0x270
[613.088705]  tun_sendmsg+0x738/0xc50 [tun]
[613.088705]  vhost_tx_batch.isra.14+0xeb/0x1f0 [vhost_net]
[613.088705]  handle_tx_copy+0x2d0/0x8f0 [vhost_net]
[613.088705]  handle_tx+0xc7/0x120 [vhost_net]
[613.088705]  vhost_worker+0x166/0x200 [vhost]
[613.088705]  kthread+0x1b1/0x1d0
[613.088705]  ret_from_fork+0x35/0x40
[613.088705]
[613.088705] The buggy address belongs to the object at ffff8881da9ab740
[613.088705]  which belongs to the cache skbuff_head_cache of size 232

Fixes: 043d222f ("tuntap: accept an array of XDP buffs through sendmsg()")
Reviewed-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: NJason Wang <jasowang@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4e4b08e5
    • S
      net: 8139cp: fix a BUG triggered by changing mtu with network traffic · a5d4a892
      由 Su Yanjun 提交于 
      When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.
Signed-off-by: NSu Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a5d4a892
    • H
      net: phy: don't allow __set_phy_supported to add unsupported modes · d2a36971
      由 Heiner Kallweit 提交于 
      Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d2a36971
  3. 01 12月, 2018 18 次提交
  5. 30 11月, 2018 9 次提交
    • C
      net: Prevent invalid access to skb->prev in __qdisc_drop_all · 9410d386
      由 Christoph Paasch 提交于 
      __qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.

With commit 68d2f84a ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.

With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.

Since commit 992cba7e ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:

[   34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[   34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[   34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[   34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[   34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[   34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[   34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[   34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[   34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[   34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[   34.512082] FS:  0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[   34.513036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[   34.514593] Call Trace:
[   34.514893]  <IRQ>
[   34.515157]  napi_gro_receive+0x93/0x150
[   34.515632]  receive_buf+0x893/0x3700
[   34.516094]  ? __netif_receive_skb+0x1f/0x1a0
[   34.516629]  ? virtnet_probe+0x1b40/0x1b40
[   34.517153]  ? __stable_node_chain+0x4d0/0x850
[   34.517684]  ? kfree+0x9a/0x180
[   34.518067]  ? __kasan_slab_free+0x171/0x190
[   34.518582]  ? detach_buf+0x1df/0x650
[   34.519061]  ? lapic_next_event+0x5a/0x90
[   34.519539]  ? virtqueue_get_buf_ctx+0x280/0x7f0
[   34.520093]  virtnet_poll+0x2df/0xd60
[   34.520533]  ? receive_buf+0x3700/0x3700
[   34.521027]  ? qdisc_watchdog_schedule_ns+0xd5/0x140
[   34.521631]  ? htb_dequeue+0x1817/0x25f0
[   34.522107]  ? sch_direct_xmit+0x142/0xf30
[   34.522595]  ? virtqueue_napi_schedule+0x26/0x30
[   34.523155]  net_rx_action+0x2f6/0xc50
[   34.523601]  ? napi_complete_done+0x2f0/0x2f0
[   34.524126]  ? kasan_check_read+0x11/0x20
[   34.524608]  ? _raw_spin_lock+0x7d/0xd0
[   34.525070]  ? _raw_spin_lock_bh+0xd0/0xd0
[   34.525563]  ? kvm_guest_apic_eoi_write+0x6b/0x80
[   34.526130]  ? apic_ack_irq+0x9e/0xe0
[   34.526567]  __do_softirq+0x188/0x4b5
[   34.527015]  irq_exit+0x151/0x180
[   34.527417]  do_IRQ+0xdb/0x150
[   34.527783]  common_interrupt+0xf/0xf
[   34.528223]  </IRQ>

This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.

Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 68d2f84a ("net: gro: properly remove skb from list")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9410d386
    • M
      net/x25: handle call collisions · b020fcf6
      由 Martin Schiller 提交于 
      If a session in X25_STATE_1 (Awaiting Call Accept) receives a call
request, the session will be closed (x25_disconnect), cause=0x01
(Number Busy) and diag=0x48 (Call Collision) will be set and a clear
request will be send.
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b020fcf6
    • M
      net/x25: fix null_x25_address handling · 06137619
      由 Martin Schiller 提交于 
      o x25_find_listener(): the compare for the null_x25_address was wrong.
   We have to check the x25_addr of the listener socket instead of the
   x25_addr of the incomming call.

 o x25_bind(): it was not possible to bind a socket to null_x25_address
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      06137619
    • M
      net/x25: fix called/calling length calculation in x25_parse_address_block · d449ba3d
      由 Martin Schiller 提交于 
      The length of the called and calling address was not calculated
correctly (BCD encoding).
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d449ba3d
    • B
      net: phy: sfp: correct location of SFP standards · 90230968
      由 Baruch Siach 提交于 
      SFP standards are now available from the SNIA (Storage Networking
Industry Association) website.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      90230968
    • D
      Merge branch 'xps-fixes' · e869e7b5
      由 David S. Miller 提交于 
      Sabrina Dubroca says:

====================
fixes for XPS configuration after Symmetric queue selection

This fixes some bugs introduced by the "Symmetric queue selection
using XPS for Rx queues".

First, the refactoring of the cleanup function skipped resetting the
queue's NUMA node under some conditions.

Second, the accounting on static keys for XPS and RXQS-XPS is
unbalanced, so the static key for XPS won't actually disable itself,
once enabled. The RXQS-XPS static key can actually be disabled by
reconfiguring a device that didn't have RXQS-XPS configured at all.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e869e7b5
    • S
      net: fix XPS static_key accounting · 867d0ad4
      由 Sabrina Dubroca 提交于 
      Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      867d0ad4
    • S
      net: restore call to netdev_queue_numa_node_write when resetting XPS · f28c020f
      由 Sabrina Dubroca 提交于 
      Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f28c020f
    • B
      net: phy: sfp: correct store of detected link modes · d7f7e001
      由 Baruch Siach 提交于 
      The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864 ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d7f7e001