Handle the case where someone has set the text segment of the kernel
as read-only by using the newly introduced "patch" mechanism.
Signed-off-by: NDoug Anderson <dianders@chromium.org>
[kees: switched structure size check to BUILD_BUG_ON (sboyd)]
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NNicolas Pitre <nico@linaro.org>

Some Marvell PJ4B CPUs also implement iWMMXt extensions. With a
proper check for iWMMXt coprocessors now in place, enable it by
default on PJ4B. While at it, also allow to manually select
the corresponding Kconfig option.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Enable hibernation for ARM architectures and provide ARM
architecture specific calls used during hibernation.

The swsusp hibernation framework depends on the
platform first having functional suspend/resume.

Then, in order to enable hibernation on a given platform, a
platform_hibernation_ops structure may need to be registered with
the system in order to save/restore any SoC-specific / cpu specific
state needing (re)init over a suspend-to-disk/resume-from-disk cycle.

For example:

     - "secure" SoCs that have different sets of control registers
       and/or different CR reg access patterns.

     - SoCs with L2 caches as the activation sequence there is
       SoC-dependent; a full off-on cycle for L2 is not done
       by the hibernation support code.

     - SoCs requiring steps on wakeup _before_ the "generic" parts
       done by cpu_suspend / cpu_resume can work correctly.

     - SoCs having persistent state which is maintained during suspend
       and resume, but will be lost during the power off cycle after
       suspend-to-disk.

This is a rebase/rework of Frank Hofmann's v5 hibernation patchset.
Acked-by: NRuss Dill <Russ.Dill@ti.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NSebastian Capella <sebastian.capella@linaro.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[fixed duplicate virt_to_pfn() definition --rmk]
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Using Rabin Vincent's ARM uprobes patches as a base, enable uprobes
support on ARM.

Caveats:

 - Thumb is not supported
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NDavid A. Long <dave.long@linaro.org>

Move the thumb version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: NDavid A. Long <dave.long@linaro.org>
Acked-by: NJon Medhurst <tixy@linaro.org>

Move the arm version of the kprobes instruction parsing code into more generic
files from where it can be used by uprobes and possibly other subsystems. The
symbol names will be made more generic in a subsequent part of this patchset.
Signed-off-by: NDavid A. Long <dave.long@linaro.org>
Acked-by: NJon Medhurst <tixy@linaro.org>

In case of BE8 kernel data is in BE order whereas code stays in LE
order. Move sigreturn_codes to separate .S file and use proper
assembler mnemonics for these code snippets. In this case compiler
will take care of proper instructions byteswaps for BE8 case.
Change assumes that sufficiently Thumb-capable tools are used to
build kernel.

Problem was discovered during ltp testing of BE system: all rt_sig*
tests failed. Tested against the same tests in both BE and LE modes.
Signed-off-by: NVictor Kamensky <victor.kamensky@linaro.org>
Reviewed-by: NDave Martin <Dave.Martin@arm.com>
Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>

This patch implements the functions required for the perf registers API,
allowing the perf tool to interface kernel register dumps with libunwind
in order to provide userspace backtracing.

Cc: Jean Pihet <jean.pihet@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The newly introduced function is to be used as .restart callback for
ARMv7-M machines. The used register is architecturally defined, so it
should work for all M-class machines.
Acked-by: NJonathan Austin <jonathan.austin@arm.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Nothing about the sched_clock implementation in the ARM port is
specific to the architecture. Generalize the code so that other
architectures can use it by selecting GENERIC_SCHED_CLOCK.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
[jstultz: Merge minor collisions with other patches in my tree]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Without an MMU we don't need to do any TLB maintenance. Until the addition
of 93dc6887 (ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181
(TLBI/DSB operations)) building the tlb maintenance ops in smp_tlb.c worked,
though none of the contents were used.

Since that commit, however, SMP NOMMU has not been able to build. This patch
restores that ability by making the building of smp_tlb.c dependent on MMU.
Signed-off-by: NJonathan Austin <jonathan.austin@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>

Rename virt_smp_ops to psci_smp_ops and move them to arch/arm/kernel/psci_smp.c.
Remove mach-virt/platsmp.c, now unused.
Compile psci_smp if CONFIG_ARM_PSCI and CONFIG_SMP.

Add a cpu_die smp_op based on psci_ops.cpu_off.

Initialize PSCI before setting smp_ops in setup_arch.

If PSCI is available on the platform, prefer psci_smp_ops over the
platform smp_ops.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
CC: arnd@arndb.de
CC: marc.zyngier@arm.com
CC: linux@arm.linux.org.uk
CC: nico@linaro.org
CC: rob.herring@calxeda.com

This patch modifies the required Kconfig and Makefile files to allow the
building of kernel for Cortex-M3.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NJonathan Austin <jonathan.austin@arm.com>
Tested-by: NJonathan Austin <jonathan.austin@arm.com>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This patch adds support for the Power State Coordination Interface
defined by ARM, allowing Linux to request CPU-centric power-management
operations from firmware implementing the PSCI protocol.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch does two things:

  * Ensure that asynchronous aborts are masked at kernel entry.
    The bootloader should be masking these anyway, but this reduces
    the damage window just in case it doesn't.

  * Enter svc mode via exception return to ensure that CPU state is
    properly serialised.  This does not matter when switching from
    an ordinary privileged mode ("PL1" modes in ARMv7-AR rev C
    parlance), but it potentially does matter when switching from a
    another privileged mode such as hyp mode.

This should allow the kernel to boot safely either from svc mode or
hyp mode, even if no support for use of the ARM Virtualization
Extensions is built into the kernel.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Now that ATAGS support is well contained, we can easily remove it from
the kernel build if so desired.  It has to explicitly be disabled, and
only when DT support is selected.

Note: disabling kernel ATAGS support does not prevent the usage of
CONFIG_ARM_ATAG_DTB_COMPAT.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make ATAGS parsing into a source file of its own, namely atags_parse.c.
Also rename compat.c to atags_compat.c to make it clearer what it is
about.  Same for atags.c which is now atags_proc.c. Gather all the atags
function declarations into a common atags.h.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch moves the CPU-specific PMU handling code out of perf_event.c
and into perf_event_cpu.c.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

The PMU reservation mechanism was originally intended to allow OProfile
and perf-events to co-ordinate over access to the CPU PMU. Since then,
OProfile for ARM has moved to using perf as its backend, so the
reservation code is no longer used.

This patch removes the reservation code for the CPU PMU on ARM.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Cc:  Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20120503085034.221811388@linutronix.de

Add support for the A15 generic timer and clocksource.
As the timer generates interrupts on a different PPI depending
on the execution mode (normal or secure), it is possible to
register two different PPIs.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Add the arch-specific code to support jump labels for ARM and Thumb-2.

This code will only be activated on compilers that are capable of
building it.  It has been tested with GCC 4.6 patched with the patch
from GCC bug 48637.

Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Extract out the code patching code from kprobes so that it can be used
from the jump label code.  Additionally, the separated code:

 - Uses the IS_ENABLED() macros instead of the #ifdefs for THUMB2
   support

 - Unifies the two separate functions in kprobes, providing one function
   that uses stop_machine() internally, and one that can be called from
   stop_machine() directly

 - Patches the text on all CPUs only on processors requiring software
   broadcasting of cache operations
Acked-by: NJon Medhurst <tixy@yxit.co.uk>
Tested-by: NJon Medhurst <tixy@yxit.co.uk>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Extract out the instruction generation code so that it can be used
for jump labels too.
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

RiscPC is the only platform using the Acorn expansion card support, so
move it into its mach-* directory.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make necessary changes to implement time keeping and irq enabling
in the core cpuidle code.  This will allow the removal of these
functionalities from various platform cpuidle implementations whose
timekeeping and irq enabling follows the form in this common code.
Signed-off-by: NRobert Lee <rob.lee@linaro.org>
Tested-by: NJean Pihet <j-pihet@ti.com>
Tested-by: NAmit Daniel <amit.kachhap@linaro.org>
Tested-by: NRobert Lee <rob.lee@linaro.org>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com>
Acked-by: NJean Pihet <j-pihet@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The crunch code in arch/arm/kernel is specific to the EP93xx. Move it
to the mach-ep93xx directory. This removes the need for the
EP93XX_SYSCON defines to be exported to arch/arm/kernel.
Signed-off-by: NRyan Mallon <rmallon@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NHartley Sweeten <hsweeten@visionengravers.com>

All sched_clock() providers have been converted to the sched_clock
framework, which also provides a jiffy based implementation for
the platforms that do not provide a counter.

It is now possible to make the sched_clock framework mandatory,
effectively preventing new platforms to add new sched_clock()
functions, which would be detrimental to the single zImage work.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch breaks the ARM condition checking code out of nwfpe/fpopcode.{ch}
into a standalone file for opcode operations. It also modifies the code
somewhat for coding style adherence, and adds some temporary variables for
increased readability.
Signed-off-by: NLeif Lindholm <leif.lindholm@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The affinity between ARM processors is defined in the MPIDR register.
We can identify which processors are in the same cluster,
and which ones have performance interdependency. We can define the
cpu topology of ARM platform, that is then used by sched_mc and sched_smt.

The default state of sched_mc and sched_smt config is disable.
When enabled, the behavior of the scheduler can be modified with
sched_mc_power_savings and sched_smt_power_savings sysfs interfaces.

Changes since v4 :
*  Remove unnecessary parentheses and blank lines

Changes since v3 :
* Update the format of printk message
* Remove blank line

Changes since v2 :
* Update the commit message and some comments

Changes since v1 :
* Update the commit message
* Add read_cpuid_mpidr in arch/arm/include/asm/cputype.h
* Modify header of arch/arm/kernel/topology.c
* Modify tests and manipulation of MPIDR's bitfields
* Modify the place and dependancy of the config
* Modify Noop functions
Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Support for the cpu_suspend functions is only built-in
when CONFIG_PM_SLEEP is enabled, but omap3/4, exynos4
and pxa always call cpu_suspend when CONFIG_PM is enabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Preallocate a page table and setup an identity mapping for the MMU
enable code.  This means we don't have to "borrow" a page table to
do this, avoiding complexities with L2 cache coherency.
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Tested-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

These test that the different kinds of probes can be successfully placed
into ARM and Thumb code and that the handlers are called correctly when
this code is executed.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Extend arch_prepare_kprobe to support probing of Thumb code. For
the actual decoding of Thumb instructions, stub functions are
added which currently just reject the probe.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

This file will contain the instruction decoding and emulation code
which is common to both ARM and Thumb instruction sets.

For now, we will just move over condition_checks from kprobes-arm.c
This table is also renamed to kprobe_condition_checks to avoid polluting
the public namespace with a too generic name.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

This file contains decoding and emulation functions for the ARM
instruction set. As we will later be adding a file for Thumb and a
file with common decoding functions, this renaming makes things clearer.
Signed-off-by: NJon Medhurst <tixy@yxit.co.uk>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>

 * To remove the risk of inconvenient register allocation decisions
   by the compiler, these functions are separated out as pure
   assembler.

 * The apcs frame manipulation code is not applicable for Thumb-2
   (and also not easily compatible).  Since it's not essential to
   have a full frame on these leaf assembler functions, the frame
   manipulation is removed, in the interests of simplicity.

 * Split up ldm/stm instructions to be compatible with Thumb-2,
   as well as avoiding instruction forms deprecated on >= ARMv7.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Reviewed-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>