- 27 9月, 2014 1 次提交
-
-
The OMAP UART provides support for HW assisted flow control. What is missing is the support to throttle / unthrottle callbacks which are used by the omap-serial driver at the moment. This patch adds the callbacks. It should be safe to add them since they are only invoked from the serial_core (uart_throttle()) if the feature flags are set. Reviewed-by: NTony Lindgren <tony@atomide.com> Tested-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 9月, 2014 5 次提交
-
-
由 Peter Hurley 提交于
uart_set_termios() is called with interrupts enabled; no need to save and restore the interrupt state when taking the uart port lock. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
Commit 64851636, serial: bfin-uart: Remove ASYNC_CTS_FLOW flag for hardware automatic CTS, open-codes uart_handle_cts_change() when CONFIG_SERIAL_BFIN_HARD_CTSRTS to skip start and stop tx. But the CTS interrupt handler _still_ calls uart_handle_cts_change(); only call uart_handle_cts_change() if !CONFIG_SERIAL_BFIN_HARD_CTSRTS. cc: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
tty->hw_stopped is not used by the tty core and is thread-unsafe; hw_stopped is a member of a bitfield whose fields are updated non-atomically and no lock is suitable for serializing updates. Replace serial core usage of tty->hw_stopped with uport->hw_stopped. Use int storage which works around Alpha EV4/5 non-atomic byte storage, since uart_port uses different locks to protect certain fields within the structure. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The serial core uses the tty port flags, ASYNC_CTS_FLOW and ASYNC_CD_CHECK, to track whether CTS and DCD changes should be ignored or handled. However, the tty port flags are not safe for atomic bit operations and no lock provides serialized updates. Introduce the struct uart_port status field to track CTS and DCD enable states, and serialize access with uart port lock. Substitute uart_cts_enabled() helper for tty_port_cts_enabled(). Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The serial core provides two helper functions, uart_handle_dcd_change() and uart_handle_cts_change(), for UART drivers to use at interrupt time. The serial core expects the UART driver to hold the uart port lock when calling these helpers to prevent state corruption. If lockdep enabled, trigger a warning if the uart port lock is not held when calling these helper functions. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 9月, 2014 1 次提交
-
-
由 Alexander Shiyan 提交于
This patch fixes COMPILE_TEST build of serial_mctrl_gpio module for architectures with custom termios.h header. sparc64:allmodconfig: In file included from drivers/tty/serial/serial_mctrl_gpio.c:21:0: include/uapi/asm-generic/termios.h:22:8: error: redefinition of 'struct termio' ./arch/sparc/include/uapi/asm/termbits.h:16:8: note: originally defined here make[3]: *** [drivers/tty/serial/serial_mctrl_gpio.o] Error 1 Reported-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 9月, 2014 4 次提交
-
-
由 Matthias Brugger 提交于
The device has a highspeed register which influences the calcualtion of the divisor. The chip lacks support for some baudrates. When requested, we set the divisor to the next smaller baudrate and adjust the c_cflag accordingly. Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com> Reviewed-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daniel Thompson 提交于
The architectures supported by this driver, arm and sh, have expensive implementations of writel(), reliant on spin locks and explicit L2 cache management. These architectures provide a cheaper writel_relaxed() which is much better suited to peripherals that do not perform DMA. The situation with readl()/readl_relaxed()is similar although less acute. This driver does not use DMA and will be more power efficient and more robust (due to absence of spin locks during console I/O) if it uses the relaxed variants. The driver supports COMPILE_TEST and therefore falls back to writel() when writel_relaxed() does not exist. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Acked-by: NSrinivas Kandagatla <srinivas.kandagatla@gmail.com> Cc: Maxime Coquelin <maxime.coquelin@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: kernel@stlinux.com Cc: linux-serial@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Shiyan 提交于
The patch fixes the following build error of CLPS711X serial driver for targets without GPIOLIB support: >> drivers/tty/serial/serial_mctrl_gpio.c:44:6: error: redefinition of 'mctrl_gpio_set' void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) ^ In file included from drivers/tty/serial/serial_mctrl_gpio.c:23:0: drivers/tty/serial/serial_mctrl_gpio.h:80:6: note: previous definition of 'mctrl_gpio_set' was here void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) ^ Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ricardo Ribalda Delgado 提交于
Commit: e676253b [3/21] serial/8250: Add support for RS485 IOCTLs, adds a building error on arch m32r. All error/warnings: drivers/tty/serial/8250/8250_core.c: In function 'serial8250_ioctl': >> drivers/tty/serial/8250/8250_core.c:2859:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] if (copy_from_user(&rs485_config, (void __user *)arg, ^ >> drivers/tty/serial/8250/8250_core.c:2871:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] if (copy_to_user((void __user *)arg, &up->rs485, ^ cc1: some warnings being treated as errors Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 9月, 2014 29 次提交
-
-
由 Lars-Peter Clausen 提交于
The tx_empty() callback currently checks the TXEMPTY bit in the interrupt status register to decided whether the FIFO should be reported as empty or not. The bit in this register gets set when the FIFO state transitions from non-empty to empty but is cleared again in the interrupt handler. This means it is not suitable to be used to decided whether the FIFO is currently empty or not. Instead use the TXEMPTY bit from the status register which will be set as long as the FIFO is empty. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NSoren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Genoud 提交于
In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was false. Tested on at91sam9g35. Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> # >= 3.16 Reviewed-by: NPeter Hurley <peter@hurleysoftware.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Cox 提交于
Another new ACPI identifier for the 8250 dw bindings to cover newer Intel SoCs such as Braswell. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
The OMAP version of the 8250 can actually use 1:1 serial8250_startup(). However it needs to be extended by a wake up irq which should to be requested & enabled at ->startup() time and disabled at ->shutdown() time. v2…v3: properly copy callbacks v1…v2: add shutdown callback Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
There is no way to access a struct uart_8250_port for a specific line. This is only required outside of the 8250/uart callbacks like for devices' suspend & remove callbacks. For those the 8250-core provides a wrapper like serial8250_unregister_port() which passes the struct to the proper function based on the line argument. For run time suspend I need access to this struct not only to make serial_out() work but also to properly restore up->ier and up->mcr. Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexey Charkov 提交于
Current code relies on the UART clock pre-divisor to be already configured in the baud rate register. Calculate it in the driver and set explicitly instead, also return the "real" effective baud rate, which is generally slightly different from the requested value. While at this, also ensure that break signal timing is updated when baud rate changes. Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexey Charkov 提交于
This adds simple polling functions for single-character transmit and receive, as used by kgdb. Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexey Charkov 提交于
Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexey Charkov 提交于
Newer WonderMedia chips introduced another flag in the UART line control register, which controls whether RTS/CTS signalling should be handled in the driver or by the hardware itself. This patch ensures that the kernel can control RTS/CTS (including disabling it altogether) by forcing this flag to software mode on affected chips (only WM8880 so far). Also remove the redundant copy of the binding doc, while we are here. Signed-off-by: NAlexey Charkov <alchark@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daniel Thompson 提交于
At present this console is optionally registered by NULL checking arch_kgdb_ops.enable_nmi. In practice this requires the architecture dependant code to implement some kind of control (e.g. module arguments) to enable/disable this feature. The kernel already provides us the perfectly adequate console= argument to enable/disable consoles. Let's use that instead! Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daniel Thompson 提交于
Universally adopt container_of() for all pointer conversion from uart_port to uart_amba_port. Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dirk Behme 提交于
Looking at the get_poll_char() function of the 8250.c serial driver, we learn: * poll_get_char() doesn't have to save/disable/restore the interrupt registers. No interrupt handling is needed in this function at all. Remove it. * Don't block in case there is no data available. So instead blocking in the do {} while loop, just return with NO_POLL_CHAR, immediately . Additionally, while the i.MX6 register URXD[7-0] contain the RX_DATA, the upper bits of this register (URXD[15-10]) might contain some control flags. To ensure that these are not returned with the data read, just mask out URXD[7-0]. These changes fix the 'hang' working with kdb: $ echo ttymxc3 > /sys/module/kgdboc/parameters/kgdboc $ echo g >/proc/sysrq-trigger [0]kdb> help ... <hang> Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
Prepare for spin lock assertion; move non-trivial assignment into function body. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
Existing callers of serial8250_modem_status() [1] hold the uart port lock; document. [1] In-tree callers of serial8250_modem_status() drivers/tty/serial/8250/8250_fsl.c fsl8250_handle_irq() drivers/tty/serial/8250/8250_core.c serial8250_handle_irq() serial8250_console_write() serial8250_get_mctrl() * * Call graphs for callers of serial8250_get_mctrl() from the function which acquires the uart port lock drivers/tty/serial/serial_core.c uart_port_startup() uart_tiocmget() uart_set_termios() uart_carrier_raised() ops->get_mctrl() ---> serial8250_get_mctrl() Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
If CONFIG_SERIAL_BFIN_CTSRTS is set, compile fails because of missing declarations for the gpio_* api. Include necessary header. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The serial core may call the UART driver's start_tx() even if tx is stopped; the UART driver must verify tx should be enabled before transmitting. Reported-by: NSam Ravnborg <sam@ravnborg.org> cc: David S. Miller <davem@davemloft.net> cc: <sparclinux@vger.kernel.org> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
mpc52xx_uart_send_xchar() is _identical_ to the default serial core x_char handling behavior in uart_send_xchar(). Remove mpc52xx_uart_send_xchar(). Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
START_CHAR() & STOP_CHAR() can be disabled if set to '\0' (__DISABLED_CHAR). UART drivers which define a send_xchar() handler must not transmit __DISABLED_CHAR. Document requirement. Affected drivers: sunsab sunhv cc: David S. Miller <davem@davemloft.net> cc: <sparclinux@vger.kernel.org> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
uart_unthrottle() attempts to avoid sending START and the previous x_char if the previous x_char has not yet been sent. However, this optimization could leave the sender in a throttled state; for example, if the sender is throttled and this unthrottle coincides with a manual tcflow(TCION) from user-space, then neither START would be sent. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The UART driver is expected to clear port->x_char after transmission while holding the port->lock. However, the serial core fails to take the port->lock before assigning port->xchar. This allows for the following race CPU 0 | CPU 1 | | serial8250_handle_irq | ... | serial8250_tx_chars | if (port->x_char) | serial_out(up, UART_TX, port->x_char) uart_send_xchar | port->x_char = ch | | port->x_char = 0 port->ops->start_tx() | | The x_char on CPU 0 will never be sent. Take the port->lock in uart_send_xchar() before assigning port->x_char. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
The serial core expects the UART driver to transmit x_char (START/STOP chars) even if tx is stopped and before data already in the tx ring buffer if possible. Also, sending x_char must not cause additional data in the tx ring buffer to transmit if tx is stopped. Cause x_char to be transmitted before any other data is sent. Auto-stop tx if the tx ring buffer is empty or tx should be stopped. Only perform one write wakeup if tx ring buffer space is below threshold. x_char handling in DMA mode is still broken; add FIXME. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
Unwrap if() conditional; no functional change. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Peter Hurley 提交于
This reverts commit 06aa82e4. This commit purports to enable auto CTS flow control for the 8250 UART driver. However, the 8250 UART driver already supports auto CTS flow control via UART_CAP_AFE and UART_CAP_EFR. Indeed, this patch introduces another DT attribute for which an existing firmware flag already exists ("auto-flow-control"). Furthermore, the use of UPF_HARD_FLOW requires the UART driver to define .throttle and .unthrottle methods, neither of which are defined for the 8250 UART driver (which will result in a NULL ptr dereference). Finally, this patch supposes to fix existing bugs in the serial core for auto CTS-enabled hardware, but does not include the class of hardware for which these bugs exist. CC: Murali Karicheri <m-karicheri2@ti.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Naveen Krishna Chatradhi 提交于
Allow Samsung serial driver to be usable on Exynos 64-bit SoC based platforms. Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Julia Lawall 提交于
Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Pranith Kumar 提交于
Fix build failure caused by missing header file: drivers/tty/serial/nwpserial.c: In function 'wait_for_bits': drivers/tty/serial/nwpserial.c:53:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration] Signed-off-by: NPranith Kumar <bobby.prani@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Carlo Caione 提交于
The SoC has four fully functional UARTs which use the same programming model. They are named UART_A, UART_B, UART_C and UART_AO (Always-On) which cannot be powered off. Signed-off-by: NCarlo Caione <carlo@caione.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michal Simek 提交于
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NPeter Korsgaard <peter@korsgaard.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michal Simek 提交于
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-