- 30 11月, 2017 3 次提交
-
-
由 Christoffer Dall 提交于
The timer optimization patches inadvertendly changed the logic to always load the timer state as if we have a vgic, even if we don't have a vgic. Fix this by doing the usual irqchip_in_kernel() check and call the appropriate load function. Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Alex Bennée 提交于
There is a fast-path of MMIO emulation inside hyp mode. The handling of single-step is broadly the same as kvm_arm_handle_step_debug() except we just setup ESR/HSR so handle_exit() does the correct thing as we exit. For the case of an emulated illegal access causing an SError we will exit via the ARM_EXCEPTION_EL1_SERROR path in handle_exit(). We behave as we would during a real SError and clear the DBG_SPSR_SS bit for the emulated instruction. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Alex Bennée 提交于
When an SError arrives during single-step both the SError and debug exceptions may be pending when the step is completed, and the architecture doesn't define the ordering of the two. This means that we can observe en SError even though we've just completed a step, without receiving a debug exception. In that case the DBG_SPSR_SS bit will have flipped as the instruction executed. After handling the abort in handle_exit() we test to see if the bit is clear and we were single-stepping before deciding if we need to exit to user space. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 29 11月, 2017 12 次提交
-
-
由 Alex Bennée 提交于
The system state of KVM when using userspace emulation is not complete until we return into KVM_RUN. To handle mmio related updates we wait until they have been committed and then schedule our KVM_EXIT_DEBUG. The kvm_arm_handle_step_debug() helper tells us if we need to return and sets up the exit_reason for us. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Alex Bennée 提交于
If we are using guest debug to single-step the guest, we need to ensure that we exit after emulating the instruction. This only affects instructions completely emulated by the kernel. For instructions emulated in userspace, we need to exit and return to complete the emulation. The kvm_arm_handle_step_debug() helper sets up the necessary exit state if needed. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Alex Bennée 提交于
After emulating instructions we may want return to user-space to handle single-step debugging. Introduce a helper function, which, if single-step is enabled, sets the run structure for return and returns true. Signed-off-by: NAlex Bennée <alex.bennee@linaro.org> Reviewed-by: NJulien Thierry <julien.thierry@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 39-bit addresses (instead of 40-bit) and also insufficiently checking the alignment. This patch fixes it. This patch is the 32bit pendent of Kristina's arm64 fix, and she deserves the actual kudos for pinpointing that one. Fixes: f7ed45be ("KVM: ARM: World-switch implementation") Cc: <stable@vger.kernel.org> # 3.9 Reported-by: NKristina Martsenko <kristina.martsenko@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Kristina Martsenko 提交于
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the VTTBR address. It seems to currently be off by one, thereby only allowing up to 47-bit addresses (instead of 48-bit) and also insufficiently checking the alignment. This patch fixes it. As an example, with 4k pages, before this patch we have: PHYS_MASK_SHIFT = 48 VTTBR_X = 37 - 24 = 13 VTTBR_BADDR_SHIFT = 13 - 1 = 12 VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000 Which is wrong, because the mask doesn't allow bit 47 of the VTTBR address to be set, and only requires the address to be 12-bit (4k) aligned, while it actually needs to be 13-bit (8k) aligned because we concatenate two 4k tables. With this patch, the mask becomes 0x0000ffffffffe000, which is what we want. Fixes: 0369f6a3 ("arm64: KVM: EL2 register definitions") Cc: <stable@vger.kernel.org> # 3.11.x Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
Before performing an unmap, let's check that what we have was really mapped the first place. Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
We miss a test against NULL after allocation. Fixes: 6d03a68f ("KVM: arm64: vgic-its: Turn device_id validation into generic ID validation") Cc: stable@vger.kernel.org # 4.8 Reported-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
The current pending table parsing code assumes that we keep the previous read of the pending bits, but keep that variable in the current block, making sure it is discarded on each loop. We end-up using whatever is on the stack. Who knows, it might just be the right thing... Fixes: 33d3bc95 ("KVM: arm64: vgic-its: Read initial LPI pending table") Cc: stable@vger.kernel.org # 4.8 Reported-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
The current pending table parsing code assumes that we keep the previous read of the pending bits, but keep that variable in the current block, making sure it is discarded on each loop. We end-up using whatever is on the stack. Who knows, it might just be the right thing... Fixes: 28077125 ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES") Cc: stable@vger.kernel.org # 4.12 Reported-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Marc Zyngier 提交于
Using the size of the structure we're allocating is a good idea and avoids any surprise... In this case, we're happilly confusing kvm_kernel_irq_routing_entry and kvm_irq_routing_entry... Fixes: 95b110ab ("KVM: arm/arm64: Enable irqchip routing") Cc: stable@vger.kernel.org # 4.8 Reported-by: NAKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Andre Przywara 提交于
Commit f39d16cb ("KVM: arm/arm64: Guard kvm_vgic_map_is_active against !vgic_initialized") introduced a check whether the VGIC has been initialized before accessing the spinlock and the VGIC data structure. However the vgic_get_irq() call in the variable declaration sneaked through the net, so lets make sure that this also gets called only after we actually allocated the arrays this function accesses. Reviewed-by: NEric Auger <eric.auger@redhat.com> Signed-off-by: NAndre Przywara <andre.przywara@arm.com> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
由 Christoffer Dall 提交于
After the timer optimization rework we accidentally end up calling physical timer enable/disable functions on VHE systems, which is neither needed nor correct, since the CNTHCTL_EL2 register format is different when HCR_EL2.E2H is set. The CNTHCTL_EL2 is initialized when CPUs become online in kvm_timer_init_vhe() and we don't have to call these functions on VHE systems, which also allows us to inline the non-VHE functionality. Reported-by: NJintack Lim <jintack@cs.columbia.edu> Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
-
- 27 11月, 2017 8 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: - LPAE fixes for kernel-readonly regions - Fix for get_user_pages_fast on LPAE systems - avoid tying decompressor to a particular platform if DEBUG_LL is enabled - BUG if we attempt to return to userspace but the to-be-restored PSR value keeps us in privileged mode (defeating an issue that ftracetest found) * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: BUG if jumping to usermode address in kernel mode ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE ARM: 8721/1: mm: dump: check hardware RO bit for LPAE ARM: make decompressor debug output user selectable ARM: fix get_user_pages_fast
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull misc x86 fixes from Ingo Molnar: - topology enumeration fixes - KASAN fix - two entry fixes (not yet the big series related to KASLR) - remove obsolete code - instruction decoder fix - better /dev/mem sanity checks, hopefully working better this time - pkeys fixes - two ACPI fixes - 5-level paging related fixes - UMIP fixes that should make application visible faults more debuggable - boot fix for weird virtualization environment * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/decoder: Add new TEST instruction pattern x86/PCI: Remove unused HyperTransport interrupt support x86/umip: Fix insn_get_code_seg_params()'s return value x86/boot/KASLR: Remove unused variable x86/entry/64: Add missing irqflags tracing to native_load_gs_index() x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing x86/pkeys/selftests: Fix protection keys write() warning x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey' x86/mpx/selftests: Fix up weird arrays x86/pkeys: Update documentation about availability x86/umip: Print a warning into the syslog if UMIP-protected instructions are used x86/smpboot: Fix __max_logical_packages estimate x86/topology: Avoid wasting 128k for package id array perf/x86/intel/uncore: Cache logical pkg id in uncore driver x86/acpi: Reduce code duplication in mp_override_legacy_irq() x86/acpi: Handle SCI interrupts above legacy space gracefully x86/boot: Fix boot failure when SMP MP-table is based at 0 x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/selftests: Add test for mapping placement for 5-level paging ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixes: a documentation fix, a Sparse warning fix and a debugging fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix task state recording/printout sched/deadline: Don't use dubious signed bitfields sched/deadline: Fix the description of runtime accounting in the documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc fixes: two PMU driver fixes and a memory leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix memory leak triggered by perf --namespace perf/x86/intel/uncore: Add event constraint for BDX PCU perf/x86/intel: Hide TSX events when RTM is not supported
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull static key fix from Ingo Molnar: "Fix a boot warning related to bad init ordering of the static keys self-test" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jump_label: Invoke jump_label_test() via early_initcall()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes, most of them related to making the UAPI header-syncing warnings easier to read and easier to act upon" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/headers: Sync objtool UAPI header objtool: Fix cross-build objtool: Move kernel headers/code sync check to a script objtool: Move synced files to their original relative locations objtool: Make unreachable annotation inline asms explicitly volatile objtool: Add a comment for the unreachable annotation macros
-
- 26 11月, 2017 5 次提交
-
-
由 Russell King 提交于
Detect if we are returning to usermode via the normal kernel exit paths but the saved PSR value indicates that we are in kernel mode. This could occur due to corrupted stack state, which has been observed with "ftracetest". This ensures that we catch the problem case before we get to user code. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: - more changes for HS48 cores: supporting MMUv5, detecting new micro-arch gizmos - axs10x platform wiring up reset driver merged in this cycle - ARC perf driver optimizations * tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: avoid vmalloc backed mmap ARCv2: perf: optimize given that num counters <= 32 ARCv2: perf: tweak overflow interrupt ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the ISA config
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild由 Linus Torvalds 提交于
Pull more Kbuild updates from Masahiro Yamada: - use 'pwd' instead of '/bin/pwd' for portability - clean up Makefiles - fix ld-option for clang - fix malloc'ed data size in Kconfig - fix parallel building along with coccicheck - fix a minor issue of package building - prompt to use "rpm-pkg" instead of "rpm" - clean up *.i and *.lst patterns by "make clean" * tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: drop $(extra-y) from real-objs-y kbuild: clean up *.i and *.lst patterns by make clean kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used kbuild: pkg: use --transform option to prefix paths in tar coccinelle: fix parallel build with CHECK=scripts/coccicheck kconfig/symbol.c: use correct pointer type argument for sizeof kbuild: Set KBUILD_CFLAGS before incl. arch Makefile kbuild: remove all dummy assignments to obj- kbuild: create built-in.o automatically if parent directory wants it kbuild: /bin/pwd -> pwd
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs由 Linus Torvalds 提交于
Pull AFS fixes from David Howells: - Make AFS file locking work again. - Don't write to a page that's being written out, but wait for it to complete. - Do d_drop() and d_add() in the right places. - Put keys on error paths. - Remove some redundant code. * tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: remove redundant assignment of dvnode to itself afs: cell: Remove unnecessary code in afs_lookup_cell afs: Fix signal handling in some file ops afs: Fix some dentry handling in dir ops and missing key_puts afs: Make afs_write_begin() avoid writing to a page that's being stored afs: Fix file locking
-
- 25 11月, 2017 3 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Radim Krčmář: "Trimmed second batch of KVM changes for Linux 4.15: - GICv4 Support for KVM/ARM - re-introduce support for CPUs without virtual NMI (cc stable) and allow testing of KVM without virtual NMI on available CPUs - fix long-standing performance issues with assigned devices on AMD (cc stable)" * tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits) kvm: vmx: Allow disabling virtual NMI support kvm: vmx: Reinstate support for CPUs without virtual NMI KVM: SVM: obey guest PAT KVM: arm/arm64: Don't queue VLPIs on INV/INVALL KVM: arm/arm64: Fix GICv4 ITS initialization issues KVM: arm/arm64: GICv4: Theory of operations KVM: arm/arm64: GICv4: Enable VLPI support KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source KVM: arm/arm64: GICv4: Add doorbell interrupt handling KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE KVM: arm/arm64: GICv4: Propagate property updates to VLPIs KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "A small batch of fixes, about 50% tagged for stable and the rest for recently merged code. There's one more fix for the >128T handling on hash. Once a process had requested a single mmap above 128T we would then always search above 128T. The correct behaviour is to consider the hint address in isolation for each mmap request. Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly identify P9 DD2.1 but in code that is currently not used by default. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan, Sukadev Bhattiprolu" * tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features powerpc/perf: Fix IMC_MAX_PMU macro powerpc/perf: Fix pmu_count to count only nest imc pmus powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id() powerpc/vas: Export chip_to_vas_id() powerpc/64s/slice: Use addr limit when computing slice mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target updates from Nicholas Bellinger: "This series is predominantly bug-fixes, with a few small improvements that have been outstanding over the last release cycle. As usual, the associated bug-fixes have CC' tags for stable. Also, things have been particularly quiet wrt new developments the last months, with most folks continuing to focus on stability atop 4.x stable kernels for their respective production configurations. Also at this point, the stable trees have been synced up with mainline. This will continue to be a priority, as production users tend to run exclusively atop stable kernels, a few releases behind mainline. The highlights include: - Fix PR PREEMPT_AND_ABORT null pointer dereference regression in v4.11+ (tangwenji) - Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu) - Add netlink command reply supported option for each device (Kenjiro Nakayama) - cxgbit: Abort the TCP connection in case of data out timeout (Varun Prakash) - Fix PR/ALUA file path truncation (David Disseldorp) - Fix double se_cmd completion during ->cmd_time_out (Mike Christie) - Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly + nab) - Fix quiese during transport_write_pending_qf endless loop (nab) - Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+ (Don White + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits) tcmu: Add a missing unlock on an error path tcmu: Fix some memory corruption iscsi-target: Fix non-immediate TMR reference leak iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK target: Fix quiese during transport_write_pending_qf endless loop target: Fix caw_sem leak in transport_generic_request_failure target: Fix QUEUE_FULL + SCSI task attribute handling iSCSI-target: Use common error handling code in iscsi_decode_text_input() target/iscsi: Detect conn_cmd_list corruption early target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd() target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype target/iscsi: Fix endianness in an error message target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it target/iscsi: Define OFFLOAD_BUF_SIZE once target: Inline transport_put_cmd() target: Suppress gcc 7 fallthrough warnings target: Move a declaration of a global variable into a header file tcmu: fix double se_cmd completion target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES ...
-
- 24 11月, 2017 9 次提交
-
-
由 Kees Cook 提交于
This fixes a missed function prototype callback from the timer conversions. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20171123221902.GA75727@beast
-
由 Colin Ian King 提交于
The assignment of dvnode to itself is redundant and can be removed. Cleans up warning detected by cppcheck: fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Gustavo A. R. Silva 提交于
Due to recent changes this piece of code is no longer needed. Addresses-Coverity-ID: 1462033 Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.ukSigned-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
afs_mkdir(), afs_create(), afs_link() and afs_symlink() all need to drop the target dentry if a signal causes the operation to be killed immediately before we try to contact the server. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Fix some of dentry handling in AFS directory ops: (1) Do d_drop() on the new_dentry before assigning a new inode to it in afs_vnode_new_inode(). It's fine to do this before calling afs_iget() because the operation has taken place on the server. (2) Replace d_instantiate()/d_rehash() with d_add(). (3) Don't d_drop() the new_dentry in afs_rename() on error. Also fix afs_link() and afs_rename() to call key_put() on all error paths where the key is taken. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Make afs_write_begin() wait for a page that's marked PG_writeback because: (1) We need to avoid interference with the data being stored so that the data on the server ends up in a defined state. (2) page->private is used to track the window of dirty data within a page, but it's also used by the storage code to track what's being written, being cleared by the completion notification. Ownership can't be relinquished by the storage code until completion because it a store fails, the data must be remarked dirty. Tracing shows something like the following (edited): x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-125 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store+ 0-125 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-2052 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 clear 0-2052 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store 0-0 kworker/u8:3-114 [2] afs_page_dirty: vn=ffff8800bef33800 9c75 WARN 0-0 The clear (completion) corresponding to the store+ (store continuation from a previous page) happens between the second begin (afs_write_begin) and the store corresponding to that. This results in the second store not seeing any data to write back, leading to the following warning: WARNING: CPU: 2 PID: 114 at ../fs/afs/write.c:403 afs_write_back_from_locked_page+0x19d/0x76c [kafs] Modules linked in: kafs(E) CPU: 2 PID: 114 Comm: kworker/u8:3 Tainted: G E 4.14.0-fscache+ #242 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Workqueue: writeback wb_workfn (flush-afs-2) task: ffff8800cad72600 task.stack: ffff8800cad44000 RIP: 0010:afs_write_back_from_locked_page+0x19d/0x76c [kafs] RSP: 0018:ffff8800cad47aa0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff8800bef33a20 RCX: 0000000000000000 RDX: 000000000000000f RSI: ffffffff81c5d0e0 RDI: ffff8800cad72e78 RBP: ffff8800d31ea1e8 R08: ffff8800c1358000 R09: ffff8800ca00e400 R10: ffff8800cad47a38 R11: ffff8800c5d9e400 R12: 0000000000000000 R13: ffffea0002d9df00 R14: ffffffffa0023c1c R15: 0000000000007fdf FS: 0000000000000000(0000) GS:ffff8800ca700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f85ac6c4000 CR3: 0000000001c10001 CR4: 00000000001606e0 Call Trace: ? clear_page_dirty_for_io+0x23a/0x267 afs_writepages_region+0x1be/0x286 [kafs] afs_writepages+0x60/0x127 [kafs] do_writepages+0x36/0x70 __writeback_single_inode+0x12f/0x635 writeback_sb_inodes+0x2cc/0x452 __writeback_inodes_wb+0x68/0x9f wb_writeback+0x208/0x470 ? wb_workfn+0x22b/0x565 wb_workfn+0x22b/0x565 ? worker_thread+0x230/0x2ac process_one_work+0x2cc/0x517 ? worker_thread+0x230/0x2ac worker_thread+0x1d4/0x2ac ? rescuer_thread+0x29b/0x29b kthread+0x15d/0x165 ? kthread_create_on_node+0x3f/0x3f ? call_usermodehelper_exec_async+0x118/0x11f ret_from_fork+0x24/0x30 Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
The recent conversion of the task state recording to use task_state_index() broke the sched_switch tracepoint task state output. task_state_index() returns surprisingly an index (0-7) which is then printed with __print_flags() applying bitmasks. Not really working and resulting in weird states like 'prev_state=t' instead of 'prev_state=I'. Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a bitmask from the return value of task_state_index() and store it in entry->prev_state, which makes __print_flags() work as expected. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: stable@vger.kernel.org Fixes: efb40f58 ("sched/tracing: Fix trace_sched_switch task-state printing") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Masami Hiramatsu 提交于
The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at <jump_table>:ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix PCI IDs of 9000 series iwlwifi devices, from Luca Coelho. 2) bpf offload bug fixes from Jakub Kicinski. 3) Fix bpf verifier to NOP out code which is dead at run time because due to branch pruning the verifier will not explore such instructions. From Alexei Starovoitov. 4) Fix crash when deleting secondary chains in packet scheduler classifier. From Roman Kapl. 5) Fix buffer management bugs in smc, from Ursula Braun. 6) Fix regression in anycast route handling, from David Ahern. 7) Fix link settings regression in r8169, from Tobias Jakobi. 8) Add back enough UFO support so that live migration still works, from Willem de Bruijn. 9) Linearize enough packet data for the full extent to which the ipvlan code will inspect the packet headers, from Gao Feng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) ipvlan: Fix insufficient skb linear check for ipv6 icmp ipvlan: Fix insufficient skb linear check for arp geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6 net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY net: accept UFO datagrams from tuntap and packet net: realtek: r8169: implement set_link_ksettings() net: ipv6: Fixup device for anycast routes during copy net/smc: Fix preinitialization of buf_desc in __smc_buf_create() net/smc: use sk_rcvbuf as start for rmb creation ipv6: Do not consider linkdown nexthops during multipath net: sched: fix crash when deleting secondary chains net: phy: cortina: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE bpf: fix branch pruning logic bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO bpf: change bpf_probe_read_str arg2 type to ARG_CONST_SIZE_OR_ZERO bpf: remove explicit handling of 0 for arg2 in bpf_probe_read bpf: introduce ARG_PTR_TO_MEM_OR_NULL i40evf: Use smp_rmb rather than read_barrier_depends fm10k: Use smp_rmb rather than read_barrier_depends igb: Use smp_rmb rather than read_barrier_depends ...
-