- 15 6月, 2008 31 次提交
-
-
由 Emmanuel Grumbach 提交于
This patch adds the possibility to disable the tx_power calibration. In 5000 HW, this calibration is implemented in uCode, hence, it is disabled in driver by default. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch makes some clean up in setup/cancel_deferred_work. iwl_setup_deferred_work does the work that is common to 4965 and 5000, then it calls to HW specific handlers. This patch also removes uneeded work_struct from iwl_priv. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch removes the possibility not to compile the run time calibrations. It also renames priv->sensitivity_work to priv->run_time_calib_work, and moves bg_run_time_calib to iwl4965_base since it is common to both: 4965 and 5000. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This helps against lost interrupts and aids in debugging this. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch removes CONFIG_IWL4965_HT #ifdefs for iwl 4965 and 5000. 11n feature is stable in those drivers and its mode of operation is determined in mac80211, so this dependency is not needed any more. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Mixed use of 'dev' and 'usbdev' for usbnet pointer can be confusing. So changing all 'usbnet *dev' to 'usbnet *usbdev'. Also remove 'net_device *net' pointer from 'rndis_wext_bind' as 'usbdev->net' were already used where needed. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Don't queue set_multicast_list work if WORK_SET_MULTICAST_LIST flag already set. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
Driver wasn't updating netif_carrier on link state changes but assumed link layer was always up. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jussi Kivilinna 提交于
rndis_wext_link_change() is called from within rndis_command() so it isn't very good place to do any work. Move to worker thread. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
Rework the alignment check in rt2x00dev.c to be independent of any potential alignment measures that may be taken before. Just check whether the payload is aligned based on the pointer addresses. Note: This is preparatory for the dynamically mapped skb buffers for the PCI drivers, as these need 4-byte alignment instead of the currently enforced offset by 2 bytes. Signed-off-by: NGertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
MAX_RX_SSI and MAX_NOISE are no longer used, it is better to remove them entirely. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
For RTS/CTS-to-self frames the IEEE80211_TX_CTL_USE_RTS_CTS flag should be cleared for the tx_info flags. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
To really force the FIELD macros to determine the first bit of the register field we should use the __builtin_choose_expr() function. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
It is not safe to use the skb->cb area for both the rxd and skb_frame_desc data at the same time, while they occupy an overlapping piece of memory. This can lead to hard to trace crashes as pointers within skb_frame_desc are pointing into nowhere, or the rxd data is overwritten with non-sense. Fix it by copying the rxd to a small buffer on the stack. Signed-off-by: NGertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
When rt2x00pci will be switched over to dynamically mapped skb's instead of statically allocated DMA buffers, it no longer can handle alignment of RX packets in a copy step, and needs to implement the same scheme as rt2x00usb does. In order to make the patch on dynamically mapped skb's smaller, already centralize the alignment handling into rt2x00lib. This allows us to move more code in rt2x00lib, and thus remove code duplication between rt2x00usb and rt2x00pci. Signed-off-by: NGertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
The data and data_len fields aren't really necessary in struct skb_frame_desc, as they can be deduced from the skb itself. Signed-off-by: NGertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
TX queues shouldn't be kicked after each frame that is put into the queue. This could cause problems during RTS and CTS-to-self as well as with fragmentation. In all those cases you want all frames to be send out in a single burst. Off course we shouldn't let the queue fill up entirely, thus we introduce a 10% threshold which, when reached, will force the frames to be send out regardless of the frame. In addition we should prevent queues to become full in such a way that the tx() handler can fail. Instead of stopping the queue when it is full, we should stop it when it is below the threshold. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The write_tx_data functions in rt2x00pci and rt2x00usb have a lot in common. This moves that duplicate code into rt2x00queue_write_tx_frame(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2x00usb_kick_tx_queue() will loop over all entries within the INDEX_DONE->INDEX range and kick each entry which is pending to be kicked. This makes the kick_tx_queue approach work the same as with the PCI drivers which will allow for more code generalisation into rt2x00lib. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
qid should be initialized to QID_BEACON and QID_ATIM for the beacon and atim quue. This makes checking for a particular queue much saner, and it shouldn't harm, because the only places where the value is send to the hardware, we are allowed to send any value we want since it is only used as argument in the TX done register. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The rt2x00_set_field functions are very often used, but GCC is better able to optimize them when they are macros instead of static inline functions. After changing it to macro's each rt2x00 driver will loose about ~3500 bytes in size. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2x00usb doesn't need the TX descriptor in the TX done path. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
mac80211 doesn't send RTS or CTS-to-self frames through the tx() callback functions so we don't need to check it. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Reduce code duplication by moving led structure initialization into a per-driver function. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
* Reduce goto usage * Mark if-statements which are true on hardware error unlikely() * Cleanup debug messages This makes the code look nicer and be better optimized since the chance of hardware errors should be very small. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
By using __ffs() the register offsets were always calculated at run-time which all FIELD32/FIELD16 definitions were builtin constants. This means we can heavily optimize the register handling by allowing GCC to do all the work during compilation. Add some compile_ffs() macros to perform the calculation at compile time. After this each rt2x00 module size is reduced by ~2500 bytes. And the stack size of several functions is reduced as well which further limits the number of rt2x00 results in 'make checkstack'. v2: Merge GertJan's bugfix of patch [1/11] directly into this patch instead of providing it as seperate patch. v3: Add extra parentheses when bitshifting __x Signed-off-by: NGertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 6月, 2008 9 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keyword that weren't updated for a long time. One of them was printed as part of a printk, which also doesn't make much sense for a 5 year old and no longer updated keyword. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
From: tony@bakeyournoodle.com (Tony Breeds) The commit 3f8cb098 (drivers/net/lib8390: fix warning, trim trailing whitespace) removed ei_local from ei_tx_err() and ei_rx_overrun() resulting in the following build errors on m68k and sh: Using /scratch1/tony/next as source for kernel GEN /scratch1/tony/next_out/Makefile CHK include/linux/version.h CHK include/linux/utsrelease.h CALL /scratch1/tony/next/scripts/checksyscalls.sh CHK include/linux/compile.h CC [M] drivers/net/zorro8390.o In file included from /scratch1/tony/next/drivers/net/zorro8390.c:47: drivers/net/lib8390.c: In function 'ei_tx_err': drivers/net/lib8390.c:556: error: 'ei_local' undeclared (first use in this function) drivers/net/lib8390.c:556: error: (Each undeclared identifier is reported only once drivers/net/lib8390.c:556: error: for each function it appears in.) drivers/net/lib8390.c: In function 'ei_rx_overrun': drivers/net/lib8390.c:823: error: 'ei_local' undeclared (first use in this function) make[3]: *** [drivers/net/zorro8390.o] Error 1 make[2]: *** [drivers/net] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 The problem is that ei_inb_p() is using various #defines (from drivers/net/8390.h) that use EI_SHIFT, which in some drivers on some architectures use ei_local. Tag ei_local as "__maybe_unused" to keep it around and keep the warnings the original commit is trying to silence ... silenced. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Using the new interface for propagating device feature flags into VLAN devices, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Using the new interface for propagating device feature flags into VLAN deivces, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Using the new interface for propagating device feature flags into VLAN devices, turn on TSO and CSUM offload on VLAN devices. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Greg Kroah-Hartman 提交于
This driver is for a number of different Option devices. Originally written by Option and Andrew Bird, but cleaned up massivly for acceptance into mainline by me and others. Many thanks to the following for their help in cleaning up the driver by providing feedback and patches to it: - Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - Oliver Neukum <oliver@neukum.org> - Alan Cox <alan@lxorguk.ukuu.org.uk> - Javier Marcet <javier@krausbeck.org> Cc: Andrew Bird <ajb@spheresystems.co.uk> Cc: Javier Marcet <javier@krausbeck.org> Cc: Filip Aben <f.aben@option.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Oliver Neukum <oliver@neukum.org> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - macsonic_init() - mac_onboard_sonic_ethernet_addr() - mac_onboard_sonic_probe() - mac_nubus_sonic_ethernet_addr() - macsonic_ident() - mac_nubus_sonic_probe() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
This patch removes write-only global "last_dev" variables from the following drivers: - a2065.c - declance.c - sunlance.c Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - mac8390_ident() - mac8390_testio() - mac8390_memsize() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-