- 02 2月, 2019 9 次提交
-
-
由 Alexey Dobriyan 提交于
/proc entries under /proc/net/* can't be cached into dcache because setns(2) can change current net namespace. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: avoid vim miscolorization] [adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time] Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2 Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2 Fixes: 1da4d377 ("proc: revalidate misc dentries") Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reported-by: NMateusz Stępień <mateusz.stepien@netrounds.com> Reported-by: NAhmad Fatoum <a.fatoum@pengutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oscar Salvador 提交于
do_migrate_range() takes a memory range and tries to isolate the pages to put them into a list. This list will be later on used in migrate_pages() to know the pages we need to migrate. Currently, if we fail to isolate a single page, we put all already isolated pages back to their LRU and we bail out from the function. This is quite suboptimal, as this will force us to start over again because scan_movable_pages will give us the same range. If there is no chance that we can isolate that page, we will loop here forever. Issue debugged in [1] has proved that. During the debugging of that issue, it was noticed that if do_migrate_ranges() fails to isolate a single page, we will just discard the work we have done so far and bail out, which means that scan_movable_pages() will find again the same set of pages. Instead, we can just skip the error, keep isolating as much pages as possible and then proceed with the call to migrate_pages(). This will allow us to do as much work as possible at once. [1] https://lkml.org/lkml/2018/12/6/324 Michal said: : I still think that this doesn't give us a whole picture. Looping for : ever is a bug. Failing the isolation is quite possible and it should : be a ephemeral condition (e.g. a race with freeing the page or : somebody else isolating the page for whatever reason). And here comes : the disadvantage of the current implementation. We simply throw : everything on the floor just because of a ephemeral condition. The : racy page_count check is quite dubious to prevent from that. Link: http://lkml.kernel.org/r/20181211135312.27034-1-osalvador@suse.deSigned-off-by: NOscar Salvador <osalvador@suse.de> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Jason Gunthorpe: "Still not much going on, the usual set of oops and driver fixes this time: - Fix two uapi breakage regressions in mlx5 drivers - Various oops fixes in hfi1, mlx4, umem, uverbs, and ipoib - A protocol bug fix for hfi1 preventing it from implementing the verbs API properly, and a compatability fix for EXEC STACK user programs - Fix missed refcounting in the 'advise_mr' patches merged this cycle. - Fix wrong use of the uABI in the hns SRQ patches merged this cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociate IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start IB/uverbs: Fix ioctl query port to consider device disassociation RDMA/mlx5: Fix flow creation on representors IB/uverbs: Fix OOPs upon device disassociation RDMA/umem: Add missing initialization of owning_mm RDMA/hns: Update the kernel header file of hns IB/mlx5: Fix how advise_mr() launches async work RDMA/device: Expose ib_device_try_get(() IB/hfi1: Add limit test for RC/UC send via loopback IB/hfi1: Remove overly conservative VM_EXEC flag check IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOV RDMA/mlx5: Fix check for supported user flags when creating a QP
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull iomap fixes from Darrick Wong: "A couple of iomap fixes to eliminate some memory corruption and hang problems that were reported: - fix page migration when using iomap for pagecache management - fix a use-after-free bug in the directio code" * tag 'iomap-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: fix a use after free in iomap_dio_rw iomap: get/put the page in iomap_page_create/release()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix a PM-runtime framework regression introduced by the recent switch-over of device autosuspend to hrtimers and a mistake in the "poll idle state" code introduced by a recent change in it. Specifics: - Since ktime_get() turns out to be problematic for device autosuspend in the PM-runtime framework, make it use ktime_get_mono_fast_ns() instead (Vincent Guittot). - Fix an initial value of a local variable in the "poll idle state" code that makes it behave not exactly as expected when all idle states except for the "polling" one are disabled (Doug Smythies)" * tag 'pm-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: poll_state: Fix default time limit PM-runtime: Fix deadlock with ktime_get()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI Kconfig fixes from Rafael Wysocki: "Prevent invalid configurations from being created (e.g. by randconfig) due to some ACPI-related Kconfig options' dependencies that are not specified directly (Sinan Kaya)" * tag 'acpi-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: Fix unmet dependency warning for SAMSUNG_Q10 platform/x86: Fix unmet dependency warning for ACPI_CMPC mfd: Fix unmet dependency warning for MFD_TPS68470
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC host fixes from Ulf Hansson: - mediatek: Fix incorrect register write for tunings - bcm2835: Fixup leakage of DMA channel on probe errors * tag 'mmc-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delay mmc: bcm2835: Fix DMA channel leak on probe error
-
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux由 Linus Torvalds 提交于
Pull i3c fixes from Boris Brezillon: - Fix a deadlock in the designware driver - Fix the error path in i3c_master_add_i3c_dev_locked() * tag 'i3c/fixes-for-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: fix deadlock i3c: fix missing detach if failed to retrieve i3c dev
-
由 Linus Torvalds 提交于
In commit 170d13ca ("x86: re-introduce non-generic memcpy_{to,from}io") I made our copy from IO space use a separate copy routine rather than rely on the generic memcpy. I did that because our generic memory copy isn't actually well-defined when it comes to internal access ordering or alignment, and will in fact depend on various CPUID flags. In particular, the default memcpy() for a modern Intel CPU will generally be just a "rep movsb", which works reasonably well for medium-sized memory copies of regular RAM, since the CPU will turn it into fairly optimized microcode. However, for non-cached memory and IO, "rep movs" ends up being horrendously slow and will just do the architectural "one byte at a time" accesses implied by the movsb. At the other end of the spectrum, if you _don't_ end up using the "rep movsb" code, you'd likely fall back to the software copy, which does overlapping accesses for the tail, and may copy things backwards. Again, for regular memory that's fine, for IO memory not so much. The thinking was that clearly nobody really cared (because things worked), but some people had seen horrible performance due to the byte accesses, so let's just revert back to our long ago version that dod "rep movsl" for the bulk of the copy, and then fixed up the potentially last few bytes of the tail with "movsw/b". Interestingly (and perhaps not entirely surprisingly), while that was our original memory copy implementation, and had been used before for IO, in the meantime many new users of memcpy_*io() had come about. And while the access patterns for the memory copy weren't well-defined (so arguably _any_ access pattern should work), in practice the "rep movsb" case had been very common for the last several years. In particular Jarkko Sakkinen reported that the memcpy_*io() change resuled in weird errors from his Geminilake NUC TPM module. And it turns out that the TPM TCG accesses according to spec require that the accesses be (a) done strictly sequentially (b) be naturally aligned otherwise the TPM chip will abort the PCI transaction. And, in fact, the tpm_crb.c driver did this: memcpy_fromio(buf, priv->rsp, 6); ... memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6); which really should never have worked in the first place, but back before commit 170d13ca it *happened* to work, because the memcpy_fromio() would be expanded to a regular memcpy, and (a) gcc would expand the first memcpy in-line, and turn it into a 4-byte and a 2-byte read, and they happened to be in the right order, and the alignment was right. (b) gcc would call "memcpy()" for the second one, and the machines that had this TPM chip also apparently ended up always having ERMS ("Enhanced REP MOVSB/STOSB instructions"), so we'd use the "rep movbs" for that copy. In other words, basically by pure luck, the code happened to use the right access sizes in the (two different!) memcpy() implementations to make it all work. But after commit 170d13ca, both of the memcpy_fromio() calls resulted in a call to the routine with the consistent memory accesses, and in both cases it started out transferring with 4-byte accesses. Which worked for the first copy, but resulted in the second copy doing a 32-bit read at an address that was only 2-byte aligned. Jarkko is actually fixing the fragile code in the TPM driver, but since this is an excellent example of why we absolutely must not use a generic memcpy for IO accesses, _and_ an IO-specific one really should strive to align the IO accesses, let's do exactly that. Side note: Jarkko also noted that the driver had been used on ARM platforms, and had worked. That was because on 32-bit ARM, memcpy_*io() ends up always doing byte accesses, and on 64-bit ARM it first does byte accesses to align to 8-byte boundaries, and then does 8-byte accesses for the bulk. So ARM actually worked by design, and the x86 case worked by pure luck. We *might* want to make x86-64 do the 8-byte case too. That should be a pretty straightforward extension, but let's do one thing at a time. And generally MMIO accesses aren't really all that performance-critical, as shown by the fact that for a long time we just did them a byte at a time, and very few people ever noticed. Reported-and-tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: NJerry Snitselaar <jsnitsel@redhat.com> Cc: David Laight <David.Laight@aculab.com> Fixes: 170d13ca ("x86: re-introduce non-generic memcpy_{to,from}io") Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 2月, 2019 14 次提交
-
-
由 Rafael J. Wysocki 提交于
* acpi-misc: platform/x86: Fix unmet dependency warning for SAMSUNG_Q10 platform/x86: Fix unmet dependency warning for ACPI_CMPC
-
由 Rafael J. Wysocki 提交于
* pm-cpuidle-fixes: cpuidle: poll_state: Fix default time limit
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "Mostly driver fixes, but there's a core framework fix in here too: - Revert the commits that introduce clk management for the SP clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and there isn't any need to manage this clk, it just causes more headaches. - A performance regression that went unnoticed for many years where we would traverse the entire clk tree looking for a clk by name when we already have the pointer to said clk that we're looking for - A parent linkage fix for the qcom SDM845 clk driver - An i.MX clk driver rate miscalculation fix where order of operations were messed up - One error handling fix from the static checkers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Use active only source for CPUSS clocks clk: ti: Fix error handling in ti_clk_parse_divider_data() clk: imx: Fix fractional clock set rate computation clk: Remove global clk traversal on fetch parent index Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock" Revert "clk: mmp2: add SP clock" Revert "Input: olpc_apsp - enable the SP clock"
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a bug in cavium/nitrox where the callback is invoked prior to the DMA unmap" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium/nitrox - Invoke callback after DMA unmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain
-
由 Baruch Siach 提交于
Revert commit 3d71746c ("PCI: armada8k: Add support for gpio controlled reset signal"). That commit breaks boot on Macchiatobin board when a Mellanox NIC is present in the PCIe slot. It turns out that full reset cycle requires first comphy serdes initialization. Reset signal toggle without comphy initialization makes access to PCI configuration registers stall indefinitely. U-Boot toggles the Macchiatobin PCIe reset line already at boot, after initializing the comphy serdes. So while commit 3d71746c ("PCI: armada8k: Add support for gpio controlled reset signal") enables PCIe on platforms that U-Boot does not touch the reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the Macchiatobin board. Revert commit 3d71746c ("PCI: armada8k: Add support for gpio controlled reset signal") entirely to fix the Macchiatobin regression. Reported-by: NSven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
由 Koen Vandeputte 提交于
commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(), which preserved the property of only doing 32-bit reads. It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(), so it changed writes from always being 32 bits to being the actual size, which works just fine. Given that: - The documentation does not mention that only 32 bit access is allowed. - Writes are already executed using the actual size - Extensive testing shows that 8b, 16b and 32b reads work as intended Allow read access of any size by replacing pci_generic_config_read32() with the pci_generic_config_read() accessors. Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Suggested-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NKoen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: NKrzysztof Halasa <khalasa@piap.pl> Acked-by: NArnd Bergmann <arnd@arndb.de> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk> CC: Tim Harvey <tharvey@gateworks.com>
-
由 Koen Vandeputte 提交于
Originally, cns3xxx used its own functions for mapping, reading and writing config registers. Commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") removed the internal PCI config write function in favor of the generic one: cns3xxx_pci_write_config() --> pci_generic_config_write() cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() while the generic one pci_generic_config_write() actually expects the real address as both the function and hardware are capable of byte-aligned writes. This currently leads to pci_generic_config_write() writing to the wrong registers. For instance, upon ath9k module loading: - driver ath9k gets loaded - The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D - cns3xxx_pci_map_bus() aligns the address to 0x0C - pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) Fix the bug by removing the alignment in the cns3xxx mapping function. Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Signed-off-by: NKoen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: NKrzysztof Halasa <khalasa@piap.pl> Acked-by: NTim Harvey <tharvey@gateworks.com> Acked-by: NArnd Bergmann <arnd@arndb.de> CC: stable@vger.kernel.org # v4.0+ CC: Bjorn Helgaas <bhelgaas@google.com> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk>
-
由 Leonard Crestez 提交于
The check on the device_link_add() return value is wrong; this leads to erroneous code execution, so fix it. Fixes: 3f7cceea ("PCI: imx: Add multi-pd support") Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
由 Leonard Crestez 提交于
On chips without a separate power domain for PCI (such as 6q/6qp) the imx6_pcie_attach_pd() function incorrectly returns an error. Fix by returning 0 if dev_pm_domain_attach_by_name() does not find anything. Fixes: 3f7cceea ("PCI: imx: Add multi-pd support") Reported-by: NLukas F.Hartmann <lukas@mntmn.com> Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
由 Andreas Gruenbacher 提交于
This reverts commit 2d29f6b9. It turns out that the fix can lead to a ~20 percent performance regression in initial writes to the page cache according to iozone. Let's revert this for now to have more time for a proper fix. Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of run-time fixes to cpu-hotplug, and seccomp tests, compile fixes to ir, net, and timers Makefiles" * tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: timers: use LDLIBS instead of LDFLAGS selftests: net: use LDLIBS instead of LDFLAGS selftests/seccomp: Enhance per-arch ptrace syscall skip tests selftests: Use lirc.h from kernel tree, not from system selftests: cpu-hotplug: fix case where CPUs offline > CPUs present
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Anna Schumaker: "This addresses two bugs, one in the error code handling of nfs_page_async_flush() and one to fix a potential NULL pointer dereference in nfs_parse_devname(). Stable bugfix: - Fix up return value on fatal errors in nfs_page_async_flush() Other bugfix: - Fix NULL pointer dereference of dev_name" * tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Fix up return value on fatal errors in nfs_page_async_flush() nfs: Fix NULL pointer dereference of dev_name
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Only three fixes. The fix for Realtek HD-audio looks lengthy, but it's just a code shuffling, and the actual changes are fairly small. The rest are a PCM core fix for a long-standing bug that was recently scratched by syzkaller, and a trivial USB-audio quirk for DSD support" * tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fixed hp_pin no value ALSA: pcm: Fix tight loop of OSS capture stream ALSA: usb-audio: Add Opus #3 to quirks for native DSD support
-
- 31 1月, 2019 7 次提交
-
-
由 Doug Smythies 提交于
The default time is declared in units of microsecnds, but is used as nanoseconds, resulting in significant accounting errors for idle state 0 time when all idle states deeper than 0 are disabled. Under these unusual conditions, we don't really care about the poll time limit anyhow. Fixes: 800fb34a ("cpuidle: poll_state: Disregard disable idle states") Signed-off-by: NDoug Smythies <dsmythies@telus.net> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Vincent Guittot 提交于
A deadlock has been seen when swicthing clocksources which use PM-runtime. The call path is: change_clocksource ... write_seqcount_begin ... timekeeping_update ... sh_cmt_clocksource_enable ... rpm_resume pm_runtime_mark_last_busy ktime_get do read_seqcount_begin while read_seqcount_retry .... write_seqcount_end Although we should be safe because we haven't yet changed the clocksource at that time, we can't do that because of seqcount protection. Use ktime_get_mono_fast_ns() instead which is lock safe for such cases. With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be monotonic across an update and as a result can goes backward. According to update_fast_timekeeper() description: "In the worst case, this can result is a slightly wrong timestamp (a few nanoseconds)". For PM-runtime autosuspend, this means only that the suspend decision may be slightly suboptimal. Fixes: 8234f673 ("PM-runtime: Switch autosuspend over to using hrtimers") Reported-by: NBiju Das <biju.das@bp.renesas.com> Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Waiman Long 提交于
The current dentry number tracking code doesn't distinguish between positive & negative dentries. It just reports the total number of dentries in the LRU lists. As excessive number of negative dentries can have an impact on system performance, it will be wise to track the number of positive and negative dentries separately. This patch adds tracking for the total number of negative dentries in the system LRU lists and reports it in the 5th field in the /proc/sys/fs/dentry-state file. The number, however, does not include negative dentries that are in flight but not in the LRU yet as well as those in the shrinker lists which are on the way out anyway. The number of positive dentries in the LRU lists can be roughly found by subtracting the number of negative dentries from the unused count. Matthew Wilcox had confirmed that since the introduction of the dentry_stat structure in 2.1.60, the dummy array was there, probably for future extension. They were not replacements of pre-existing fields. So no sane applications that read the value of /proc/sys/fs/dentry-state will do dummy thing if the last 2 fields of the sysctl parameter are not zero. IOW, it will be safe to use one of the dummy array entry for negative dentry count. Signed-off-by: NWaiman Long <longman@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Waiman Long 提交于
The list_lru structure is essentially just a pointer to a table of per-node LRU lists. Even if CONFIG_MEMCG_KMEM is defined, the list field is just used for LRU list registration and shrinker_id is set at initialization. Those fields won't need to be touched that often. So there is no point to make the list_lru structures to sit in their own cachelines. Signed-off-by: NWaiman Long <longman@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Waiman Long 提交于
The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by: NWaiman Long <longman@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: "A few more fixes this time: - Two patches to fix the error path of the map_sg implementation of the AMD IOMMU driver. - Also a missing IOTLB flush is fixed in the AMD IOMMU driver. - Memory leak fix for the Intel IOMMU driver. - Fix a regression in the Mediatek IOMMU driver which caused device initialization to fail (seen as broken HDMI output)" * tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix IOMMU page flush when detach device from a domain iommu/mediatek: Use correct fwspec in mtk_iommu_add_device() iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions() iommu/amd: Unmap all mapped pages in error path of map_sg iommu/amd: Call free_iova_fast with pfn in map_sg
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Here is a bunch of GPIO fixes for the v5.0 series. I was helped out by Bartosz in collecting these fixes, for which I am very grateful, the biggest achievement in GPIO right now is work distribution. There is one serious core fix (timestamping) and a bunch of driver fixes: - Fix timestamps on nested IRQs - Handle IRQs properly in multiple instances of PCF857x - Use the right data register and IRQ type setting in the Spreadtrum GPIO driver - Let the value argument work properly when setting direction in the Altera GPIO driver - Mask interrupts properly in the vf610 driver" * tag 'gpio-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: vf610: Mask all GPIO interrupts gpio: altera-a10sr: Set proper output level for direction_output gpio: sprd: Fix incorrect irq type setting for the async EIC gpio: sprd: Fix the incorrect data register gpiolib: fix line event timestamps for nested irqs gpio: pcf857x: Fix interrupts on multiple instances
-
- 30 1月, 2019 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Need to save away the IV across tls async operations, from Dave Watson. 2) Upon successful packet processing, we should liberate the SKB with dev_consume_skb{_irq}(). From Yang Wei. 3) Only apply RX hang workaround on effected macb chips, from Harini Katakam. 4) Dummy netdev need a proper namespace assigned to them, from Josh Elsasser. 5) Some paths of nft_compat run lockless now, and thus we need to use a proper refcnt_t. From Florian Westphal. 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua. 7) netrom does not refcount sockets properly wrt. timers, fix that by using the sock timer API. From Cong Wang. 8) Fix locking of inexact inserts of xfrm policies, from Florian Westphal. 9) Missing xfrm hash generation bump, also from Florian. 10) Missing of_node_put() in hns driver, from Yonglong Liu. 11) Fix DN_IFREQ_SIZE, from Johannes Berg. 12) ip6mr notifier is invoked during traversal of wrong table, from Nir Dotan. 13) TX promisc settings not performed correctly in qed, from Manish Chopra. 14) Fix OOB access in vhost, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) MAINTAINERS: Add entry for XDP (eXpress Data Path) net: set default network namespace in init_dummy_netdev() net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles net: caif: call dev_consume_skb_any when skb xmit done net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: macb: Apply RXUBR workaround only to versions with errata net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq net: tls: Fix deadlock in free_resources tx net: tls: Save iv in tls_rec for async crypto requests vhost: fix OOB in get_rx_bufs() qed: Fix stack out of bounds bug qed: Fix system crash in ll2 xmit qed: Fix VF probe failure while FLR qed: Fix LACP pdu drops for VFs qed: Fix bug in tx promiscuous mode settings net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles netfilter: ipt_CLUSTERIP: fix warning unused variable cn ...
-
由 Trond Myklebust 提交于
Ensure that we return the fatal error value that caused us to exit nfs_page_async_flush(). Fixes: c373fff7 ("NFSv4: Don't special case "launder"") Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: NBenjamin Coddington <bcodding@redhat.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Yishai Hadas 提交于
The vma->vm_mm can become impossible to get before rdma_umap_close() is called, in this case we must not try to get an mm that is already undergoing process exit. In this case there is no need to wait for anything as the VMA will be destroyed by another thread soon and is already effectively 'unreachable' by userspace. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000012bc50067 P4D 800000012bc50067 PUD 129db5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 2050 Comm: bash Tainted: G W OE 4.20.0-rc6+ #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__rb_erase_color+0xb9/0x280 Code: 84 17 01 00 00 48 3b 68 10 0f 84 15 01 00 00 48 89 58 08 48 89 de 48 89 ef 4c 89 e3 e8 90 84 22 00 e9 60 ff ff ff 48 8b 5d 10 <f6> 03 01 0f 84 9c 00 00 00 48 8b 43 10 48 85 c0 74 09 f6 00 01 0f RSP: 0018:ffffbecfc090bab8 EFLAGS: 00010246 RAX: ffff97616346cf30 RBX: 0000000000000000 RCX: 0000000000000101 RDX: 0000000000000000 RSI: ffff97623b6ca828 RDI: ffff97621ef10828 RBP: ffff97621ef10828 R08: ffff97621ef10828 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff97623b6ca838 R13: ffffffffbb3fef50 R14: ffff97623b6ca828 R15: 0000000000000000 FS: 00007f7a5c31d740(0000) GS:ffff97623bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000011255a000 CR4: 00000000000006e0 Call Trace: unlink_file_vma+0x3b/0x50 free_pgtables+0xa1/0x110 exit_mmap+0xca/0x1a0 ? mlx5_ib_dealloc_pd+0x28/0x30 [mlx5_ib] mmput+0x54/0x140 uverbs_user_mmap_disassociate+0xcc/0x160 [ib_uverbs] uverbs_destroy_ufile_hw+0xf7/0x120 [ib_uverbs] ib_uverbs_remove_one+0xea/0x240 [ib_uverbs] ib_unregister_device+0xfb/0x200 [ib_core] mlx5_ib_remove+0x51/0xe0 [mlx5_ib] mlx5_remove_device+0xc1/0xd0 [mlx5_core] mlx5_unregister_device+0x3d/0xb0 [mlx5_core] remove_one+0x2a/0x90 [mlx5_core] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x16d/0x240 unbind_store+0xb2/0x100 kernfs_fop_write+0x102/0x180 __vfs_write+0x36/0x1a0 ? __alloc_fd+0xa9/0x170 ? set_close_on_exec+0x49/0x70 vfs_write+0xad/0x1a0 ksys_write+0x52/0xc0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jesper Dangaard Brouer 提交于
Add multiple people as maintainers for XDP, sorted alphabetically. XDP is also tied to driver level support and code, but we cannot add all drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some of those changes in drivers. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josh Elsasser 提交于
Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by: NJosh Elsasser <jelsasser@appneta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Wei 提交于
The skb should be freed by dev_consume_skb_any() in b44_start_xmit() when bounce_skb is used. The skb is be replaced by bounce_skb, so the original skb should be consumed(not drop). dev_consume_skb_irq() should be called in b44_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: NYang Wei <yang.wei9@zte.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Wei 提交于
The skb shouled be consumed when xmit done, it makes drop profiles (dropwatch, perf) more friendly. dev_kfree_skb_irq()/kfree_skb() shouled be replaced by dev_consume_skb_any(), it makes code cleaner. Signed-off-by: NYang Wei <yang.wei9@zte.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yang Wei 提交于
dev_consume_skb_irq() should be called in cp_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: NYang Wei <yang.wei9@zte.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harini Katakam 提交于
The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2019 1 次提交
-
-
由 Kailang Yang 提交于
Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a745 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-