In z3fold_create_pool(), the memory allocated by __alloc_percpu() is not
released on the error path that pool->compact_wq , which holds the
return value of create_singlethread_workqueue(), is NULL.  This will
result in a memory leak bug.

[akpm@linux-foundation.org: fix oops on kzalloc() failure, check __alloc_percpu() retval]
Link: http://lkml.kernel.org/r/1522803111-29209-1-git-send-email-wangxidong_97@163.comSigned-off-by: NXidong Wang <wangxidong_97@163.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A THP memcg charge can trigger the oom killer since 25160354 ("mm,
thp: remove __GFP_NORETRY from khugepaged and madvised allocations").
We have used an explicit __GFP_NORETRY previously which ruled the OOM
killer automagically.

Memcg charge path should be semantically compliant with the allocation
path and that means that if we do not trigger the OOM killer for costly
orders which should do the same in the memcg charge path as well.
Otherwise we are forcing callers to distinguish the two and use
different gfp masks which is both non-intuitive and bug prone.  As soon
as we get a costly high order kmalloc user we even do not have any means
to tell the memcg specific gfp mask to prevent from OOM because the
charging is deep within guts of the slab allocator.

The unexpected memcg OOM on THP has already been fixed upstream by
9d3c3354 ("mm, thp: do not cause memcg oom for thp") but this is a
one-off fix rather than a generic solution.  Teach mem_cgroup_oom to
bail out on costly order requests to fix the THP issue as well as any
other costly OOM eligible allocations to be added in future.

Also revert 9d3c3354 because special gfp for THP is no longer
needed.

Link: http://lkml.kernel.org/r/20180403193129.22146-1-mhocko@kernel.org
Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use of pte_write(pte) is only valid for present pte, the common code
which set the migration entry can be reach for both valid present pte
and special swap entry (for device memory).  Fix the code to use the
mpfn value which properly handle both cases.

On x86 this did not have any bad side effect because pte write bit is
below PAGE_BIT_GLOBAL and thus special swap entry have it set to 0 which
in turn means we were always creating read only special migration entry.

So once migration did finish we always write protected the CPU page
table entry (moreover this is only an issue when migrating from device
memory to system memory).  End effect is that CPU write access would
fault again and restore write permission.

This behaviour isn't too bad; it just burns CPU cycles by forcing CPU to
take a second fault on write access. ie, double faulting the same
address.  There is no corruption or incorrect states (it behaves as a
COWed page from a fork with a mapcount of 1).

Link: http://lkml.kernel.org/r/20180402023506.12180-1-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__highest_present_section_nr is a more strict boundary than
NR_MEM_SECTIONS.  So checking __highest_present_section_nr directly is
enough.

Link: http://lkml.kernel.org/r/20180330032044.21647-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

change_pte_range is called from task work context to mark PTEs for
receiving NUMA faulting hints.  If the marked pages are dirty then
migration may fail.  Some filesystems cannot migrate dirty pages without
blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU.
Even when they can, it can be a waste of cycles when the pages are
shared forcing higher scan rates.  This patch avoids marking shared
dirty pages for hinting faults but also will skip a migration if the
page was dirtied after the scanner updated a clean page.

This is most noticeable running the NASA Parallel Benchmark when backed
by btrfs, the default root filesystem for some distributions, but also
noticeable when using XFS.

The following are results from a 4-socket machine running a 4.16-rc4
kernel with some scheduler patches that are pending for the next merge
window.

                        4.16.0-rc4             4.16.0-rc4
                 schedtip-20180309          nodirty-v1
  Time cg.D      459.07 (   0.00%)      444.21 (   3.24%)
  Time ep.D       76.96 (   0.00%)       77.69 (  -0.95%)
  Time is.D       25.55 (   0.00%)       27.85 (  -9.00%)
  Time lu.D      601.58 (   0.00%)      596.87 (   0.78%)
  Time mg.D      107.73 (   0.00%)      108.22 (  -0.45%)

is.D regresses slightly in terms of absolute time but note that that
particular load varies quite a bit from run to run.  The more relevant
observation is the total system CPU usage.

            4.16.0-rc4  4.16.0-rc4
          schedtip-20180309 nodirty-v1
  User        71471.91    70627.04
  System      11078.96     8256.13
  Elapsed       661.66      632.74

That is a substantial drop in system CPU usage and overall the workload
completes faster.  The NUMA balancing statistics are also interesting

  NUMA base PTE updates        111407972   139848884
  NUMA huge PMD updates           206506      264869
  NUMA page range updates      217139044   275461812
  NUMA hint faults               4300924     3719784
  NUMA hint local faults         3012539     3416618
  NUMA hint local percent             70          91
  NUMA pages migrated            1517487     1358420

While more PTEs are scanned due to changes in what faults are gathered,
it's clear that a far higher percentage of faults are local as the bulk
of the remote hits were dirty pages that, in this case with btrfs, had
no chance of migrating.

The following is a comparison when using XFS as that is a more realistic
filesystem choice for a data partition

                        4.16.0-rc4             4.16.0-rc4
                 schedtip-20180309          nodirty-v1r47
  Time cg.D      485.28 (   0.00%)      442.62 (   8.79%)
  Time ep.D       77.68 (   0.00%)       77.54 (   0.18%)
  Time is.D       26.44 (   0.00%)       24.79 (   6.24%)
  Time lu.D      597.46 (   0.00%)      597.11 (   0.06%)
  Time mg.D      142.65 (   0.00%)      105.83 (  25.81%)

That is a reasonable gain on two relatively long-lived workloads.  While
not presented, there is also a substantial drop in system CPu usage and
the NUMA balancing stats show similar improvements in locality as btrfs
did.

Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Reviewed-by: NRik van Riel <riel@surriel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fix typos and syntaxes, thanks to Randy Dunlap for pointing them out
(they were all my faults).

Link: http://lkml.kernel.org/r/20180409151859.4713-1-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NRalph Campbell <rcampbell@nvidia.com>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last fix was still wrong, as we need the inline dummy functions also
for the case that CONFIG_HMM is enabled but CONFIG_HMM_MIRROR is not:

  kernel/fork.o: In function `__mmdrop':
  fork.c:(.text+0x14f6): undefined reference to `hmm_mm_destroy'

This adds back the second copy of the dummy functions, hopefully
this time in the right place.

Link: http://lkml.kernel.org/r/20180404110236.804484-1-arnd@arndb.de
Fixes: 8900d06a277a ("mm/hmm: fix header file if/else/endif maze")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hmm_devmem_find() requires rcu_read_lock_held() but there's nothing which
actually uses the RCU protection.  The only caller is
hmm_devmem_pages_create() which already grabs the mutex and does
superfluous rcu_read_lock/unlock() around the function.

This doesn't add anything and just adds to confusion.  Remove the RCU
protection and open-code the radix tree lookup.  If this needs to become
more sophisticated in the future, let's add them back when necessary.

Link: http://lkml.kernel.org/r/20180314194515.1661824-4-tj@kernel.orgSigned-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users of hmm_vma_fault() and hmm_vma_get_pfns() provide a flags array and
pfn shift value allowing them to define their own encoding for HMM pfn
that are fill inside the pfns array of the hmm_range struct.  With this
device driver can get pfn that match their own private encoding out of HMM
without having to do any conversion.

[rcampbell@nvidia.com: don't ignore specific pte fault flag in hmm_vma_fault()]
  Link: http://lkml.kernel.org/r/20180326213009.2460-2-jglisse@redhat.com
[rcampbell@nvidia.com: clarify fault logic for device private memory]
  Link: http://lkml.kernel.org/r/20180326213009.2460-3-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20180323005527.758-16-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NRalph Campbell <rcampbell@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes hmm_vma_fault() to not take a global write fault flag for a
range but instead rely on caller to populate HMM pfns array with proper
fault flag ie HMM_PFN_VALID if driver want read fault for that address or
HMM_PFN_VALID and HMM_PFN_WRITE for write.

Moreover by setting HMM_PFN_DEVICE_PRIVATE the device driver can ask for
device private memory to be migrated back to system memory through page
fault.

This is more flexible API and it better reflects how device handles and
reports fault.

Link: http://lkml.kernel.org/r/20180323005527.758-15-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional change, just create one function to handle pmd and one to
handle pte (hmm_vma_handle_pmd() and hmm_vma_handle_pte()).

Link: http://lkml.kernel.org/r/20180323005527.758-14-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move hmm_pfns_clear() closer to where it is used to make it clear it is
not use by page table walkers.

Link: http://lkml.kernel.org/r/20180323005527.758-13-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make naming consistent across code, DEVICE_PRIVATE is the name use outside
HMM code so use that one.

Link: http://lkml.kernel.org/r/20180323005527.758-12-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no point in differentiating between a range for which there is
not even a directory (and thus entries) and empty entry (pte_none() or
pmd_none() returns true).

Simply drop the distinction ie remove HMM_PFN_EMPTY flag and merge now
duplicate hmm_vma_walk_hole() and hmm_vma_walk_clear() functions.

Link: http://lkml.kernel.org/r/20180323005527.758-11-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Special vma (one with any of the VM_SPECIAL flags) can not be access by
device because there is no consistent model across device drivers on those
vma and their backing memory.

This patch directly use hmm_range struct for hmm_pfns_special() argument
as it is always affecting the whole vma and thus the whole range.

It also make behavior consistent after this patch both hmm_vma_fault() and
hmm_vma_get_pfns() returns -EINVAL when facing such vma.  Previously
hmm_vma_fault() returned 0 and hmm_vma_get_pfns() return -EINVAL but both
were filling the HMM pfn array with special entry.

Link: http://lkml.kernel.org/r/20180323005527.758-10-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All device driver we care about are using 64bits page table entry.  In
order to match this and to avoid useless define convert all HMM pfn to
directly use uint64_t.  It is a first step on the road to allow driver to
directly use pfn value return by HMM (saving memory and CPU cycles use for
conversion between the two).

Link: http://lkml.kernel.org/r/20180323005527.758-9-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only peculiar architecture allow write without read thus assume that any
valid pfn do allow for read.  Note we do not care for write only because
it does make sense with thing like atomic compare and exchange or any
other operations that allow you to get the memory value through them.

Link: http://lkml.kernel.org/r/20180323005527.758-8-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both hmm_vma_fault() and hmm_vma_get_pfns() were taking a hmm_range struct
as parameter and were initializing that struct with others of their
parameters.  Have caller of those function do this as they are likely to
already do and only pass this struct to both function this shorten
function signature and make it easier in the future to add new parameters
by simply adding them to the structure.

Link: http://lkml.kernel.org/r/20180323005527.758-7-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The private field of mm_walk struct point to an hmm_vma_walk struct and
not to the hmm_range struct desired.  Fix to get proper struct pointer.

Link: http://lkml.kernel.org/r/20180323005527.758-6-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code was lost in translation at one point.  This properly call
mmu_notifier_unregister_no_release() once last user is gone.  This fix the
zombie mm_struct as without this patch we do not drop the refcount we have
on it.

Link: http://lkml.kernel.org/r/20180323005527.758-5-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hmm_mirror_register() registers a callback for when the CPU pagetable is
modified.  Normally, the device driver will call hmm_mirror_unregister()
when the process using the device is finished.  However, if the process
exits uncleanly, the struct_mm can be destroyed with no warning to the
device driver.

Link: http://lkml.kernel.org/r/20180323005527.758-4-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The #if/#else/#endif for IS_ENABLED(CONFIG_HMM) were wrong.  Because of
this after multiple include there was multiple definition of both
hmm_mm_init() and hmm_mm_destroy() leading to build failure if HMM was
enabled (CONFIG_HMM set).

Link: http://lkml.kernel.org/r/20180323005527.758-3-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the documentation for HMM to fix minor typos and phrasing to be a
bit more readable.

Link: http://lkml.kernel.org/r/20180323005527.758-2-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Stephen  Bates <sbates@raithlin.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The trace event trace_mm_vmscan_lru_shrink_inactive() currently has 12
parameters! Seven of them are from the reclaim_stat structure.  This
structure is currently local to mm/vmscan.c.  By moving it to the global
vmstat.h header, we can also reference it from the vmscan tracepoints.
In moving it, it brings down the overhead of passing so many arguments
to the trace event.  In the future, we may limit the number of arguments
that a trace event may pass (ideally just 6, but more realistically it
may be 8).

Before this patch, the code to call the trace event is this:

 0f 83 aa fe ff ff       jae    ffffffff811e6261 <shrink_inactive_list+0x1e1>
 48 8b 45 a0             mov    -0x60(%rbp),%rax
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 44 8b 6d d4             mov    -0x2c(%rbp),%r13d
 8b 4d d0                mov    -0x30(%rbp),%ecx
 44 8b 75 cc             mov    -0x34(%rbp),%r14d
 44 8b 7d c8             mov    -0x38(%rbp),%r15d
 48 89 45 90             mov    %rax,-0x70(%rbp)
 8b 83 b8 fe ff ff       mov    -0x148(%rbx),%eax
 8b 55 c0                mov    -0x40(%rbp),%edx
 8b 7d c4                mov    -0x3c(%rbp),%edi
 8b 75 b8                mov    -0x48(%rbp),%esi
 89 45 80                mov    %eax,-0x80(%rbp)
 65 ff 05 e4 f7 e2 7e    incl   %gs:0x7ee2f7e4(%rip)        # 15bd0 <__preempt_count>
 48 8b 05 75 5b 13 01    mov    0x1135b75(%rip),%rax        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 48 85 c0                test   %rax,%rax
 74 72                   je     ffffffff811e646a <shrink_inactive_list+0x3ea>
 48 89 c3                mov    %rax,%rbx
 4c 8b 10                mov    (%rax),%r10
 89 f8                   mov    %edi,%eax
 48 89 85 68 ff ff ff    mov    %rax,-0x98(%rbp)
 89 f0                   mov    %esi,%eax
 48 89 85 60 ff ff ff    mov    %rax,-0xa0(%rbp)
 89 c8                   mov    %ecx,%eax
 48 89 85 78 ff ff ff    mov    %rax,-0x88(%rbp)
 89 d0                   mov    %edx,%eax
 48 89 85 70 ff ff ff    mov    %rax,-0x90(%rbp)
 8b 45 8c                mov    -0x74(%rbp),%eax
 48 8b 7b 08             mov    0x8(%rbx),%rdi
 48 83 c3 18             add    $0x18,%rbx
 50                      push   %rax
 41 54                   push   %r12
 41 55                   push   %r13
 ff b5 78 ff ff ff       pushq  -0x88(%rbp)
 41 56                   push   %r14
 41 57                   push   %r15
 ff b5 70 ff ff ff       pushq  -0x90(%rbp)
 4c 8b 8d 68 ff ff ff    mov    -0x98(%rbp),%r9
 4c 8b 85 60 ff ff ff    mov    -0xa0(%rbp),%r8
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 48 8b 55 90             mov    -0x70(%rbp),%rdx
 8b 75 80                mov    -0x80(%rbp),%esi
 41 ff d2                callq  *%r10

After the patch:

 0f 83 a8 fe ff ff       jae    ffffffff811e626d <shrink_inactive_list+0x1cd>
 8b 9b b8 fe ff ff       mov    -0x148(%rbx),%ebx
 45 8b 64 24 20          mov    0x20(%r12),%r12d
 4c 8b 6d a0             mov    -0x60(%rbp),%r13
 65 ff 05 f5 f7 e2 7e    incl   %gs:0x7ee2f7f5(%rip)        # 15bd0 <__preempt_count>
 4c 8b 35 86 5b 13 01    mov    0x1135b86(%rip),%r14        # ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
 4d 85 f6                test   %r14,%r14
 74 2a                   je     ffffffff811e6411 <shrink_inactive_list+0x371>
 49 8b 06                mov    (%r14),%rax
 8b 4d 8c                mov    -0x74(%rbp),%ecx
 49 8b 7e 08             mov    0x8(%r14),%rdi
 49 83 c6 18             add    $0x18,%r14
 4c 89 ea                mov    %r13,%rdx
 45 89 e1                mov    %r12d,%r9d
 4c 8d 45 b8             lea    -0x48(%rbp),%r8
 89 de                   mov    %ebx,%esi
 51                      push   %rcx
 48 8b 4d 98             mov    -0x68(%rbp),%rcx
 ff d0                   callq  *%rax

Link: http://lkml.kernel.org/r/2559d7cb-ec60-1200-2362-04fa34fd02bb@fb.com
Link: http://lkml.kernel.org/r/20180322121003.4177af15@gandalf.local.homeSigned-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: NAlexei Starovoitov <ast@fb.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memcg reclaim may alter pgdat->flags based on the state of LRU lists in
cgroup and its children.  PGDAT_WRITEBACK may force kswapd to sleep
congested_wait(), PGDAT_DIRTY may force kswapd to writeback filesystem
pages.  But the worst here is PGDAT_CONGESTED, since it may force all
direct reclaims to stall in wait_iff_congested().  Note that only kswapd
have powers to clear any of these bits.  This might just never happen if
cgroup limits configured that way.  So all direct reclaims will stall as
long as we have some congested bdi in the system.

Leave all pgdat->flags manipulations to kswapd.  kswapd scans the whole
pgdat, only kswapd can clear pgdat->flags once node is balanced, thus
it's reasonable to leave all decisions about node state to kswapd.

Why only kswapd? Why not allow to global direct reclaim change these
flags? It is because currently only kswapd can clear these flags.  I'm
less worried about the case when PGDAT_CONGESTED falsely not set, and
more worried about the case when it falsely set.  If direct reclaimer
sets PGDAT_CONGESTED, do we have guarantee that after the congestion
problem is sorted out, kswapd will be woken up and clear the flag? It
seems like there is no such guarantee.  E.g.  direct reclaimers may
eventually balance pgdat and kswapd simply won't wake up (see
wakeup_kswapd()).

Moving pgdat->flags manipulation to kswapd, means that cgroup2 recalim
now loses its congestion throttling mechanism.  Add per-cgroup
congestion state and throttle cgroup2 reclaimers if memcg is in
congestion state.

Currently there is no need in per-cgroup PGDAT_WRITEBACK and PGDAT_DIRTY
bits since they alter only kswapd behavior.

The problem could be easily demonstrated by creating heavy congestion in
one cgroup:

    echo "+memory" > /sys/fs/cgroup/cgroup.subtree_control
    mkdir -p /sys/fs/cgroup/congester
    echo 512M > /sys/fs/cgroup/congester/memory.max
    echo $$ > /sys/fs/cgroup/congester/cgroup.procs
    /* generate a lot of diry data on slow HDD */
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
    ....
    while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &

and some job in another cgroup:

    mkdir /sys/fs/cgroup/victim
    echo 128M > /sys/fs/cgroup/victim/memory.max

    # time cat /dev/sda > /dev/null
    real    10m15.054s
    user    0m0.487s
    sys     1m8.505s

According to the tracepoint in wait_iff_congested(), the 'cat' spent 50%
of the time sleeping there.

With the patch, cat don't waste time anymore:

    # time cat /dev/sda > /dev/null
    real    5m32.911s
    user    0m0.411s
    sys     0m56.664s

[aryabinin@virtuozzo.com: congestion state should be per-node]
  Link: http://lkml.kernel.org/r/20180406135215.10057-1-aryabinin@virtuozzo.com
[ayabinin@virtuozzo.com: make congestion state per-cgroup-per-node instead of just per-cgroup[
  Link: http://lkml.kernel.org/r/20180406180254.8970-2-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-5-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have separate LRU list for each memory cgroup.  Memory reclaim
iterates over cgroups and calls shrink_inactive_list() every inactive
LRU list.  Based on the state of a single LRU shrink_inactive_list() may
flag the whole node as dirty,congested or under writeback.  This is
obviously wrong and hurtful.  It's especially hurtful when we have
possibly small congested cgroup in system.  Than *all* direct reclaims
waste time by sleeping in wait_iff_congested().  And the more memcgs in
the system we have the longer memory allocation stall is, because
wait_iff_congested() called on each lru-list scan.

Sum reclaim stats across all visited LRUs on node and flag node as
dirty, congested or under writeback based on that sum.  Also call
congestion_wait(), wait_iff_congested() once per pgdat scan, instead of
once per lru-list scan.

This only fixes the problem for global reclaim case.  Per-cgroup reclaim
may alter global pgdat flags too, which is wrong.  But that is separate
issue and will be addressed in the next patch.

This change will not have any effect on a systems with all workload
concentrated in a single cgroup.

[aryabinin@virtuozzo.com: check nr_writeback against all nr_taken, not just file]
  Link: http://lkml.kernel.org/r/20180406180254.8970-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-4-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only kswapd can have non-zero nr_immediate, and current_may_throttle()
is always true for kswapd (PF_LESS_THROTTLE bit is never set) thus it's
enough to check stat.nr_immediate only.

Link: http://lkml.kernel.org/r/20180315164553.17856-4-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update some comments that became stale since transiton from per-zone to
per-node reclaim.

Link: http://lkml.kernel.org/r/20180315164553.17856-2-aryabinin@virtuozzo.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Indirectly reclaimable memory can consume a significant part of total
memory and it's actually reclaimable (it will be released under actual
memory pressure).

So, the overcommit logic should treat it as free.

Otherwise, it's possible to cause random system-wide memory allocation
failures by consuming a significant amount of memory by indirectly
reclaimable memory, e.g.  dentry external names.

If overcommit policy GUESS is used, it might be used for denial of
service attack under some conditions.

The following program illustrates the approach.  It causes the kernel to
allocate an unreclaimable kmalloc-256 chunk for each stat() call, so
that at some point the overcommit logic may start blocking large
allocation system-wide.

  int main()
  {
  	char buf[256];
  	unsigned long i;
  	struct stat statbuf;

  	buf[0] = '/';
  	for (i = 1; i < sizeof(buf); i++)
  		buf[i] = '_';

  	for (i = 0; 1; i++) {
  		sprintf(&buf[248], "%8lu", i);
  		stat(buf, &statbuf);
  	}

  	return 0;
  }

This patch in combination with related indirectly reclaimable memory
patches closes this issue.

Link: http://lkml.kernel.org/r/20180313130041.8078-1-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I received a report about suspicious growth of unreclaimable slabs on
some machines.  I've found that it happens on machines with low memory
pressure, and these unreclaimable slabs are external names attached to
dentries.

External names are allocated using generic kmalloc() function, so they
are accounted as unreclaimable.  But they are held by dentries, which
are reclaimable, and they will be reclaimed under the memory pressure.

In particular, this breaks MemAvailable calculation, as it doesn't take
unreclaimable slabs into account.  This leads to a silly situation, when
a machine is almost idle, has no memory pressure and therefore has a big
dentry cache.  And the resulting MemAvailable is too low to start a new
workload.

To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is
used to track the amount of memory, consumed by external names.  The
counter is increased in the dentry allocation path, if an external name
structure is allocated; and it's decreased in the dentry freeing path.

To reproduce the problem I've used the following Python script:

  import os

  for iter in range (0, 10000000):
      try:
          name = ("/some_long_name_%d" % iter) + "_" * 220
          os.stat(name)
      except Exception:
          pass

Without this patch:
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7811688 kB
  $ python indirect.py
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    2753052 kB

With the patch:
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7809516 kB
  $ python indirect.py
  $ cat /proc/meminfo | grep MemAvailable
  MemAvailable:    7749144 kB

[guro@fb.com: fix indirectly reclaimable memory accounting for CONFIG_SLOB]
  Link: http://lkml.kernel.org/r/20180312194140.19517-1-guro@fb.com
[guro@fb.com: fix indirectly reclaimable memory accounting]
  Link: http://lkml.kernel.org/r/20180313125701.7955-1-guro@fb.com
Link: http://lkml.kernel.org/r/20180305133743.12746-5-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adjust /proc/meminfo MemAvailable calculation by adding the amount of
indirectly reclaimable memory (rounded to the PAGE_SIZE).

Link: http://lkml.kernel.org/r/20180305133743.12746-4-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "indirectly reclaimable memory", v2.

This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.

This patch (of 3):

Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.

Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e.  will
be released under memory pressure.

The counter is in bytes, as it's not always possible to count such
objects in pages.  The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.

Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.comSigned-off-by: NRoman Gushchin <guro@fb.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull c6x updates from Mark Salter.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  c6x: pass endianness info to sparse
  c6x: fix platforms/plldata.c get_coreid build error
  c6x: remove unused KTHREAD_SIZE definition

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.17. Rough overview:

   (1) generic platform: Add support for Microsemi Ocelot SoCs

   (2) crypto: Add CRC32 and CRC32C HW acceleration module

   (3) Various cleanups and misc improvements

  More detailed summary:

  Miscellaneous:
   - hang more efficiently on halt/powerdown/restart
   - pm-cps: Block system suspend when a JTAG probe is present
   - expand make help text for generic defconfigs
   - refactor handling of legacy defconfigs
   - determine the entry point from the ELF file header to fix microMIPS
     for certain toolchains
   - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code

  Minor cleanups:
   - DTS: boston/ci20: Unit name cleanups and correction
   - kdump: Make the default for PHYSICAL_START always 64-bit
   - constify gpio_led in Alchemy, AR7, and TXX9
   - silence a couple of W=1 warnings
   - remove duplicate includes

  Platform support:
  Generic platform:
   - add support for Microsemi Ocelot
   - dt-bindings: Add vendor prefix for Microsemi Corporation
   - dt-bindings: Add bindings for Microsemi SoCs
   - add ocelot SoC & PCB123 board DTS files
   - MAINTAINERS: Add entry for Microsemi MIPS SoCs
   - enable crc32-mips on r6 configs

  ath79:
   - fix AR724X_PLL_REG_PCIE_CONFIG offset

  BCM47xx:
   - firmware: Use mac_pton() for MAC address parsing
   - add Luxul XAP1500/XWR1750 WiFi LEDs
   - use standard reset button for Luxul XWR-1750

  BMIPS:
   - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
   - add STB PM, wake-up timer, watchdog DT nodes

  Octeon:
   - drop '.' after newlines in printk calls

  ralink:
   - pci-mt7621: Enable PCIe on MT7688"

* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
  MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
  MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
  MIPS: Make the default for PHYSICAL_START always 64-bit
  MIPS: Use the entry point from the ELF file header
  MAINTAINERS: Add entry for Microsemi MIPS SoCs
  MIPS: generic: Add support for Microsemi Ocelot
  MIPS: mscc: Add ocelot PCB123 device tree
  MIPS: mscc: Add ocelot dtsi
  dt-bindings: mips: Add bindings for Microsemi SoCs
  dt-bindings: Add vendor prefix for Microsemi Corporation
  MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
  MIPS: pci-mt7620: Enable PCIe on MT7688
  MIPS: pm-cps: Block system suspend when a JTAG probe is present
  MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
  MIPS: Hang more efficiently on halt/powerdown/restart
  FIRMWARE: bcm47xx_nvram: Replace mac address parsing
  MIPS: BMIPS: Add Broadcom STB watchdog nodes
  ...

Pull tracing updates from Steven Rostedt:
 "New features:

   - Tom Zanussi's extended histogram work.

     This adds the synthetic events to have histograms from multiple
     event data Adds triggers "onmatch" and "onmax" to call the
     synthetic events Several updates to the histogram code from this

   - Allow way to nest ring buffer calls in the same context

   - Allow absolute time stamps in ring buffer

   - Rewrite of filter code parsing based on Al Viro's suggestions

   - Setting of trace_clock to global if TSC is unstable (on boot)

   - Better OOM handling when allocating large ring buffers

   - Added initcall tracepoints (consolidated initcall_debug code with
     them)

  And other various fixes and clean ups"

* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
  init: Have initcall_debug still work without CONFIG_TRACEPOINTS
  init, tracing: Have printk come through the trace events for initcall_debug
  init, tracing: instrument security and console initcall trace events
  init, tracing: Add initcall trace events
  tracing: Add rcu dereference annotation for test func that touches filter->prog
  tracing: Add rcu dereference annotation for filter->prog
  tracing: Fixup logic inversion on setting trace_global_clock defaults
  tracing: Hide global trace clock from lockdep
  ring-buffer: Add set/clear_current_oom_origin() during allocations
  ring-buffer: Check if memory is available before allocation
  lockdep: Add print_irqtrace_events() to __warn
  vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
  tracing: Uninitialized variable in create_tracing_map_fields()
  tracing: Make sure variable string fields are NULL-terminated
  tracing: Add action comparisons when testing matching hist triggers
  tracing: Don't add flag strings when displaying variable references
  tracing: Fix display of hist trigger expressions containing timestamps
  ftrace: Drop a VLA in module_exists()
  tracing: Mention trace_clock=global when warning about unstable clocks
  tracing: Default to using trace_global_clock if sched_clock is unstable
  ...

Pull libnvdimm updates from Dan Williams:
 "This cycle was was not something I ever want to repeat as there were
  several late changes that have only now just settled.

  Half of the branch up to commit d2c997c0 ("fs, dax: use
  page->mapping to warn...") have been in -next for several releases.
  The of_pmem driver and the address range scrub rework were late
  arrivals, and the dax work was scaled back at the last moment.

  The of_pmem driver missed a previous merge window due to an oversight.
  A sense of obligation to rectify that miss is why it is included for
  4.17. It has acks from PowerPC folks. Stephen reported a build failure
  that only occurs when merging it with your latest tree, for now I have
  fixed that up by disabling modular builds of of_pmem. A test merge
  with your tree has received a build success report from the 0day robot
  over 156 configs.

  An initial version of the ARS rework was submitted before the merge
  window. It is self contained to libnvdimm, a net code reduction, and
  passing all unit tests.

  The filesystem-dax changes are based on the wait_var_event()
  functionality from tip/sched/core. However, late review feedback
  showed that those changes regressed truncate performance to a large
  degree. The branch was rewound to drop the truncate behavior change
  and now only includes preparation patches and cleanups (with full acks
  and reviews). The finalization of this dax-dma-vs-trnucate work will
  need to wait for 4.18.

  Summary:

   - A rework of the filesytem-dax implementation provides for detection
     of unmap operations (truncate / hole punch) colliding with
     in-progress device-DMA. A fix for these collisions remains a
     work-in-progress pending resolution of truncate latency and
     starvation regressions.

   - The of_pmem driver expands the users of libnvdimm outside of x86
     and ACPI to describe an implementation of persistent memory on
     PowerPC with Open Firmware / Device tree.

   - Address Range Scrub (ARS) handling is completely rewritten to
     account for the fact that ARS may run for 100s of seconds and there
     is no platform defined way to cancel it. ARS will now no longer
     block namespace initialization.

   - The NVDIMM Namespace Label implementation is updated to handle
     label areas as small as 1K, down from 128K.

   - Miscellaneous cleanups and updates to unit test infrastructure"

* tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
  libnvdimm, of_pmem: workaround OF_NUMA=n build error
  nfit, address-range-scrub: add module option to skip initial ars
  nfit, address-range-scrub: rework and simplify ARS state machine
  nfit, address-range-scrub: determine one platform max_ars value
  powerpc/powernv: Create platform devs for nvdimm buses
  doc/devicetree: Persistent memory region bindings
  libnvdimm: Add device-tree based driver
  libnvdimm: Add of_node to region and bus descriptors
  libnvdimm, region: quiet region probe
  libnvdimm, namespace: use a safe lookup for dimm device name
  libnvdimm, dimm: fix dpa reservation vs uninitialized label area
  libnvdimm, testing: update the default smart ctrl_temperature
  libnvdimm, testing: Add emulation for smart injection commands
  nfit, address-range-scrub: introduce nfit_spa->ars_state
  libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'
  nfit, address-range-scrub: fix scrub in-progress reporting
  dax, dm: allow device-mapper to operate without dax support
  dax: introduce CONFIG_DAX_DRIVER
  fs, dax: use page->mapping to warn if truncate collides with a busy page
  ext2, dax: introduce ext2_dax_aops
  ...

Pull RTC updates from Alexandre Belloni:
 "This contains a few series that have been in preparation for a while
  and that will help systems with RTCs that will fail in 2038, 2069 or
  2100.

  Subsystem:
   - Add tracepoints
   - Rework of the RTC/nvmem API to allow drivers to discard struct
     nvmem_config after registration
   - New range API, drivers can now expose the useful range of the RTC
   - New offset API the core is now able to add an offset to the RTC
     time, modifying the supported range.
   - Multiple rtc_time64_to_tm fixes
   - Handle time_t overflow on 32 bit platforms in the core instead of
     letting drivers do crazy things.
   - remove rtc_control API

  New driver:
   - Intersil ISL12026

  Drivers:
   - Drivers exposing the RTC non volatile memory have been converted to
     use nvmem
   - Removed useless time and date validation
   - Removed an indirection pattern that was a cargo cult from ancient
     drivers
   - Removed VLA usage
   - Fixed a possible race condition in probe functions
   - AB8540 support is dropped from ab8500
   - pcf85363 now has alarm support"

* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
  rtc: snvs: Fix usage of snvs_rtc_enable
  rtc: mt7622: fix module autoloading for OF platform drivers
  rtc: isl12022: use true and false for boolean values
  rtc: ab8500: Drop AB8540 support
  rtc: remove a warning during scripts/kernel-doc step
  rtc: 88pm860x: remove artificial limitation
  rtc: 88pm80x: remove artificial limitation
  rtc: st-lpc: remove artificial limitation
  rtc: mrst: remove artificial limitation
  rtc: mv: remove artificial limitation
  rtc: hctosys: Ensure system time doesn't overflow time_t
  parisc: time: stop validating rtc_time in .read_time
  rtc: pcf85063: fix clearing bits in pcf85063_start_clock
  rtc: at91sam9: Set name of regmap_config
  rtc: s5m: Remove VLA usage
  rtc: s5m: Move enum from rtc.h to rtc-s5m.c
  rtc: remove VLA usage
  rtc: Add useful timestamp definitions
  rtc: Add one offset seconds to expand RTC range
  rtc: Factor out the RTC range validation into rtc_valid_range()
  ...

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, just a couple of small bugfixes,
  improvements and cleanups:

   - make it possible to load radeonfb driver when offb driver is loaded
     first (Mathieu Malaterre)

   - fix memory leak in offb driver (Mathieu Malaterre)

   - fix unaligned access in udlfb driver (Ladislav Michl)

   - convert atmel_lcdfb driver to use GPIO descriptors (Ludovic
     Desroches)

   - avoid mismatched prototypes in sisfb driver (Arnd Bergmann)

   - remove VLA usage from viafb driver (Gustavo A. R. Silva)

   - add missing help text to FB_I810_I2 config option (Ulf Magnusson)

   - misc fixes (Gustavo A. R. Silva, Colin Ian King, Markus Elfring)

   - remove dead code from s3c-fb driver for Exynos and S5PV210
     platforms

   - misc cleanups (Corentin Labbe, Ladislav Michl, Ulf Magnusson,
     Vladimir Zapolskiy, Markus Elfring)"

* tag 'fbdev-v4.17' of git://github.com/bzolnier/linux: (32 commits)
  video: fbdev: s3c-fb: remove dead platform code for Exynos and S5PV210 platforms
  video: au1100fb: Delete an unnecessary variable initialisation in au1100fb_drv_probe()
  video: au1100fb: Improve a size determination in au1100fb_drv_probe()
  video: au1100fb: Delete an error message for a failed memory allocation in au1100fb_drv_probe()
  video/console/sticore: Delete an error message for a failed memory allocation in sti_try_rom_generic()
  video: ARM CLCD: Improve a size determination in clcdfb_probe()
  video: ARM CLCD: Delete an error message for a failed memory allocation in clcdfb_probe()
  video: matroxfb: Delete an error message for a failed memory allocation in matroxfb_crtc2_probe()
  video: s3c-fb: Improve a size determination in s3c_fb_probe()
  video: s3c-fb: Delete an error message for a failed memory allocation in s3c_fb_probe()
  video: fsl-diu-fb: Delete an error message for a failed memory allocation in fsl_diu_init()
  video: ssd1307fb: Improve a size determination in ssd1307fb_probe()
  video: smscufx: Delete an error message for a failed memory allocation in ufx_realloc_framebuffer()
  video: smscufx: Return an error code only as a constant in ufx_realloc_framebuffer()
  video: smscufx: Less checks in ufx_usb_probe() after error detection
  video: udlfb: Return an error code only as a constant in dlfb_realloc_framebuffer()
  video/fbdev/stifb: Delete an error message for a failed memory allocation in stifb_init_fb()
  video/fbdev/stifb: Return -ENOMEM after a failed kzalloc() in stifb_init_fb()
  video: fbdev: aty128fb: use true and false for boolean values
  fbdev: aty: fix missing indentation in if statement
  ...

Pull sound fixes from Takashi Iwai:
 "The main purpose of this pull request is a fix for a regression in the
  recent PCM OSS emulation code that may lead to RCU stall. Since
  syzkaller hits this too often, I send the pull request now with a
  minimal collection. Possibly another pull request may follow before
  RC1.

  The other fixes here are for USB-audio class 2 and 3 to improve the
  parser for the clock descriptors. These are rather cleanups but good
  for security, too.

  Last but not least, another included fix is the trivial one to remove
  superfluous WARN_ON() that annoyed syzbot"

* tag 'sound-fix-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Remove WARN_ON() at snd_pcm_hw_params() error
  ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulation
  ALSA: usb-audio: Add sanity checks in UAC3 clock parsers
  ALSA: usb-audio: More strict sanity checks for clock parsers
  ALSA: usb-audio: Refactor clock finder helpers

Pull media fixes from Mauro Carvalho Chehab:
 "A series of media updates/fixes for 4.17.

  There are two important core fix patches in this series:

   - A regression fix on Kernel 4.16 with causes it to not work with
     some input devices that depend on media core

   - A fix at compat32 bits with causes it to OOPS on overlay, and
     affects the Kernels where the CVE-2017-13166 was backported

  The remaining ones are other random fixes at the documentation and on
  drivers.

  The biggest part of this series is a set of 18 patches for the Intel
  atomisp driver. Currently, it produces hundreds of warnings/errors on
  sparse/smatch, causing me to sometimes ignore new warnings on other
  drivers that are not so broken. This driver is on really poor state,
  even for staging standards: it has several layers of abstraction on
  it, and it supports two different hardware. Selecting between them
  require to add a define (there isn't even a Kconfig option for such
  purpose). Just on this smatch cleanup, I could easily get rid of 8
  "do-nothing" files. So, I'm seriously considering its removal from
  upstream, if I don't see any real work on addressing the problems
  there along this year"

* tag 'media/v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (48 commits)
  media: v4l2-core: fix size of devnode_nums[] bitarray
  media: v4l2-compat-ioctl32: don't oops on overlay
  media: i2c: adv748x: afe: fix sparse warning
  media: extended-controls.rst: transmitter -> receiver
  media: staging: atomisp: stop duplicating input format types
  media: staging: atomisp: get rid of an unused var
  media: staging: atomisp: stop mixing enum types
  media: staging: atomisp: get rid of some static warnings
  media: staging: atomisp: use %p to print pointers
  media: staging: atomisp: remove an useless check
  media: staging: atomisp: avoid a warning if 32 bits build
  media: staging: atomisp: don't access a NULL var
  media: staging: atomisp: Get rid of *default.host.[ch]
  media: staging: atomisp: get rid of an unused function
  media: staging: atomisp: remove unused set_pd_base()
  media: staging: atomisp: fix endianess issues
  media: staging: atomisp: add a missing include
  media: staging: atomisp: get rid of stupid statements
  media: staging: atomisp: declare static vars as such
  media: staging: atomisp: ia_css_output.host: don't use var before check
  ...