- 20 5月, 2011 2 次提交
-
-
由 Dave Chinner 提交于
The workqueue initialisation function is called twice when initialising the XFS subsystem. Remove the second initialisation call. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Joe Perches 提交于
xfs_alert_tag() can be defined using xfs_alert(), and thereby avoid using xfs_printk() altogether. This is the only remaining use of xfs_printk(), so changing it this way means xfs_printk() can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated.can simply be eliminated. Also add format checking to the non-debug inline function xfs_debug. Miscellaneous function prototype argument alignment. (Updated to delete the definition of xfs_printk(), which is no longer used or needed.) Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 10 5月, 2011 5 次提交
-
-
由 Dave Chinner 提交于
The recent conversion of the xfsaild functionality to a work queue introduced a hard-to-hit log space grant hang. One is caused by a race condition in determining whether there is a psh in progress or not. The XFS_AIL_PUSHING_BIT is used to determine whether a push is currently in progress. When the AIL push work completes, it checked whether the target changed and cleared the PUSHING bit to allow a new push to be requeued. The race condition is as follows: Thread 1 push work smp_wmb() smp_rmb() check ailp->xa_target unchanged update ailp->xa_target test/set PUSHING bit does not queue clear PUSHING bit does not requeue Now that the push target is updated, new attempts to push the AIL will not trigger as the push target will be the same, and hence despite trying to push the AIL we won't ever wake it again. The fix is to ensure that the AIL push work clears the PUSHING bit before it checks if the target is unchanged. As a result, both push triggers operate on the same test/set bit criteria, so even if we race in the push work and miss the target update, the thread requesting the push will still set the PUSHING bit and queue the push work to occur. For safety sake, the same queue check is done if the push work detects the target change, though only one of the two will will queue new work due to the use of test_and_set_bit() checks. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
The recent conversion of the xfsaild functionality to a work queue introduced a hard-to-hit log space grant hang. One of the problems noticed was that updates of the push target are not 32 bit safe as the target is a 64 bit value. We cannot copy a 64 bit LSN without the possibility of corrupting the result when racing with another updating thread. We have function to do this update safely without needing to care about 32/64 bit issues - xfs_trans_ail_copy_lsn() - so use that when updating the AIL push target. Also move the reading of the target in the push work inside the AIL lock, and use XFS_LSN_CMP() for the unlocked comparison during work termination to close read holes as well. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
The recent conversion of the xfsaild functionality to a work queue introduced a hard-to-hit log space grant hang. One of the problems discovered is a target mismatch between the item pushing loop and the target itself. The push trigger checks for the target increasing (i.e. new target > current) while the push loop only pushes items that have a LSN < current. As a result, we can get the situation where the push target is X, the items at the tail of the AIL have LSN X and they don't get pushed. The push work then completes thinking it is done, and cannot be restarted until the push target increases to >= X + 1. If the push target then never increases (because the tail is not moving), then we never run the push work again and we stall. Fix it by making sure log items with a LSN that matches the target exactly are pushed during the loop. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
The recent conversion of the xfsaild functionality to a work queue introduced a hard-to-hit log space grant hang. The main cause is a regression where a work exit path fails to clear the PUSHING state and recheck the target correctly. Make both exit paths do the same PUSHING bit clearing and target checking when the "no more work to be done" condition is hit. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
On a 32 bit highmem PowerPC machine, the XFS inode cache was growing without bound and exhausting low memory causing the OOM killer to be triggered. After some effort, the problem was reproduced on a 32 bit x86 highmem machine. The problem is that the per-ag inode reclaim index cursor was not getting reset to the start of the AG if the radix tree tag lookup found no more reclaimable inodes. Hence every further reclaim attempt started at the same index beyond where any reclaimable inodes lay, and no further background reclaim ever occurred from the AG. Without background inode reclaim the VM driven cache shrinker simply cannot keep up with cache growth, and OOM is the result. While the change that exposed the problem was the conversion of the inode reclaim to use work queues for background reclaim, it was not the cause of the bug. The bug was introduced when the cursor code was added, just waiting for some weird configuration to strike.... Signed-off-by: NDave Chinner <dchinner@redhat.com> Tested-By: NChristian Kujau <lists@nerdbynature.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
- 29 4月, 2011 7 次提交
-
-
由 Christoph Hellwig 提交于
XFS_IOC_ZERO_RANGE uses struct xfs_flock64, and thus requires argument translation for 32-bit binaries on x86. Add the required XFS_IOC_ZERO_RANGE_32 defined and add it to the list of commands that require xfs_flock64 translation. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
xfs_fsblock_t may be a 32-bit type on if XFS_BIG_BLKNOS is not set, make sure to cast a value of this type to an unsigned long long before using the ll printk qualifier. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 David Sterba 提交于
follow these guidelines: - leave initialization in the declaration block if it fits the line - move to the code where it's more suitable ('for' init block) The last chunk was modified from David's original to be a correct fix for what appeared to be a duplicate initialization. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Instead of finding the per-ag and then taking and releasing the pagb_lock for every single busy extent completed sort the list of busy extents and only switch betweens AGs where nessecary. This becomes especially important with the online discard support which will hit this lock more often. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
Update the extent tree in case we have to reuse a busy extent, so that it always is kept uptodate. This is done by replacing the busy list searches with a new xfs_alloc_busy_reuse helper, which updates the busy extent tree in case of a reuse. This allows us to allow reusing metadata extents unconditionally, and thus avoid log forces especially for allocation btree blocks. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
Every time we reallocate a busy extent, we cause a synchronous log force to occur to ensure the freeing transaction is on disk before we continue and use the newly allocated extent. This is extremely sub-optimal as we have to mark every transaction with blocks that get reused as synchronous. Instead of searching the busy extent list after deciding on the extent to allocate, check each candidate extent during the allocation decisions as to whether they are in the busy list. If they are in the busy list, we trim the busy range out of the extent we have found and determine if that trimmed range is still OK for allocation. In many cases, this check can be incorporated into the allocation extent alignment code which already does trimming of the found extent before determining if it is a valid candidate for allocation. Based on earlier patches from Dave Chinner. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
While we need to make sure we do not reuse busy extents, there is no need to force out busy extents when moving them between the AGFL and the freespace btree as we still take care of that when doing the real allocation. To avoid the log force when just moving extents from the different free space tracking structures, move the busy search out of xfs_alloc_get_freelist into the callers that need it, and move the busy list insert from xfs_free_ag_extent which is used both by AGFL refills and real allocation to xfs_free_extent, which is only used by the latter. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 21 4月, 2011 1 次提交
-
-
由 Dave Chinner 提交于
Commit 957935dc ("xfs: fix xfs_debug warnings" broke the logic in __xfs_printk(). Instead of only printing one of two possible output strings based on whether the fs has a name or not, it outputs both. Fix it to only output one message again. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 19 4月, 2011 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://codeaurora.org/quic/kernel/davidb/linux-msm由 Linus Torvalds 提交于
* 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: fix missing return value msm: Remove extraneous ffa device check
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add blk_run_queue_async block: blk_delay_queue() should use kblockd workqueue md: fix up raid1/raid10 unplugging. md: incorporate new plugging into raid5. md: provide generic support for handling unplug callbacks. md - remove old plugging code. md/dm - remove remains of plug_fn callback. md: use new plugging interface for RAID IO. block: drop queue lock before calling __blk_run_queue() for kblockd punt Revert "block: add callback function for unplug notification" block: Enhance new plugging support to support general callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powermac: Build fix with SMP and CPU hotplug powerpc/perf_event: Skip updating kernel counters if register value shrinks powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled powerpc: Fix oops if scan_dispatch_log is called too early powerpc/pseries: Use a kmem cache for DTL buffers powerpc/kexec: Fix regression causing compile failure on UP powerpc/85xx: disable Suspend support if SMP enabled powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE powerpc/book3e: Fix CPU feature handling on 64-bit e5500 powerpc: Check device status before adding serial device powerpc/85xx: Don't add disabled PCIe devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: fix free space cache leak Btrfs: avoid taking the chunk_mutex in do_chunk_alloc Btrfs end_bio_extent_readpage should look for locked bits Btrfs: don't force chunk allocation in find_free_extent Btrfs: Check validity before setting an acl Btrfs: Fix incorrect inode nlink in btrfs_link() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr() Btrfs: make uncache_state unconditional btrfs: using cached extent_state in set/unlock combinations Btrfs: avoid taking the trans_mutex in btrfs_end_transaction Btrfs: fix subvolume mount by name problem when default mount subvolume is set fix user annotation in ioctl.c Btrfs: check for duplicate iov_base's when doing dio reads btrfs: properly handle overlapping areas in memmove_extent_buffer Btrfs: fix memory leaks in btrfs_new_inode() Btrfs: check for duplicate iov_base's when doing dio reads Btrfs: reuse the extent_map we found when calling btrfs_get_extent Btrfs: do not use async submit for small DIO io's Btrfs: don't split dio bios if we don't have to ...
-
由 Linus Torvalds 提交于
Rather than pass in some random truncated offset to the pid-related functions, check that the offset is in range up-front. This is just cleanup, the previous commit fixed the real problem. Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
next_pidmap() just quietly accepted whatever 'last' pid that was passed in, which is not all that safe when one of the users is /proc. Admittedly the proc code should do some sanity checking on the range (and that will be the next commit), but that doesn't mean that the helper functions should just do that pidmap pointer arithmetic without checking the range of its arguments. So clamp 'last' to PID_MAX_LIMIT. The fact that we then do "last+1" doesn't really matter, the for-loop does check against the end of the pidmap array properly (it's only the actual pointer arithmetic overflow case we need to worry about, and going one bit beyond isn't going to overflow). [ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ] Reported-by: NTavis Ormandy <taviso@cmpxchg8b.com> Analyzed-by: NRobert Święcki <robert@swiecki.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Igor Mammedov 提交于
Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254aa0ad269cfbd2875c973ef25ab5b5e9db ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254. Acked-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NIgor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jeff Brown 提交于
Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: NJeff Brown <jeffbrown@android.com> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 4月, 2011 15 次提交
-
-
由 Chris Mason 提交于
The free space caching code was recently reworked to cache all the pages it needed instead of using find_get_page everywhere. One loop was missed though, so it ended up leaking pages. This fixes it to use our page array instead of find_get_page. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Christoph Hellwig 提交于
Instead of overloading __blk_run_queue to force an offload to kblockd add a new blk_run_queue_async helper to do it explicitly. I've kept the blk_queue_stopped check for now, but I suspect it's not needed as the check we do when the workqueue items runs should be enough. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 NeilBrown 提交于
We just need to make sure that an unplug event wakes up the md thread, which is exactly what mddev_check_plugged does. Also remove some plug-related code that is no longer needed. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
In raid5 plugging is used for 2 things: 1/ collecting writes that require a bitmap update 2/ collecting writes in the hope that we can create full stripes - or at least more-full. We now release these different sets of stripes when plug_cnt is zero. Also in make_request, we call mddev_check_plug to hopefully increase plug_cnt, and wake up the thread at the end if plugging wasn't achieved for some reason. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When an md device adds a request to a queue, it can call mddev_check_plugged. If this succeeds then we know that the md thread will be woken up shortly, and ->plug_cnt will be non-zero until then, so some processing can be delayed. If it fails, then no unplug callback is expected and the make_request function needs to do whatever is required to make the request happen. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
md has some plugging infrastructure for RAID5 to use because the normal plugging infrastructure required a 'request_queue', and when called from dm, RAID5 doesn't have one of those available. This relied on the ->unplug_fn callback which doesn't exist any more. So remove all of that code, both in md and raid5. Subsequent patches with restore the plugging functionality. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Now that unplugging is done differently, the unplug_fn callback is never called, so it can be completely discarded. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Jens Axboe 提交于
If we know we are going to punt to kblockd, we can drop the queue lock before calling into __blk_run_queue() since it only does a safe bit test and a workqueue call. Since kblockd needs to grab this very lock as one of the first things it does, it's a good optimization to drop the lock before waking kblockd. Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Jens Axboe 提交于
MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f7566457. Conflicts: block/blk-core.c Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 NeilBrown 提交于
md/raid requires an unplug callback, but as it does not uses requests the current code cannot provide one. So allow arbitrary callbacks to be attached to the blk_plug. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Eric B Munson 提交于
Because of speculative event roll back, it is possible for some event coutners to decrease between reads on POWER7. This causes a problem with the way that counters are updated. Delta calues are calculated in a 64 bit value and the top 32 bits are masked. If the register value has decreased, this leaves us with a very large positive value added to the kernel counters. This patch protects against this by skipping the update if the delta would be negative. This can lead to a lack of precision in the coutner values, but from my testing the value is typcially fewer than 10 samples at a time. Signed-off-by: NEric B Munson <emunson@mgebm.net> Cc: stable@kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stefan Roese 提交于
This problem was noticed on an MPC855T platform. Ftrace did oops when trying to write to the kernel text segment. Many thanks to Joakim for finding the root cause of this problem. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Joakim Tjernlund <joakim.tjernlund@transmode.se> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-