- 26 11月, 2019 30 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup updates from Tejun Heo: "There are several notable changes here: - Single thread migrating itself has been optimized so that it doesn't need threadgroup rwsem anymore. - Freezer optimization to avoid unnecessary frozen state changes. - cgroup ID unification so that cgroup fs ino is the only unique ID used for the cgroup and can be used to directly look up live cgroups through filehandle interface on 64bit ino archs. On 32bit archs, cgroup fs ino is still the only ID in use but it is only unique when combined with gen. - selftest and other changes" * 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits) writeback: fix -Wformat compilation warnings docs: cgroup: mm: Fix spelling of "list" cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root() cgroup: use cgrp->kn->id as the cgroup ID kernfs: use 64bit inos if ino_t is 64bit kernfs: implement custom exportfs ops and fid type kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id() kernfs: convert kernfs_node->id from union kernfs_node_id to u64 kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes kernfs: use dumber locking for kernfs_find_and_get_node_by_ino() netprio: use css ID instead of cgroup ID writeback: use ino_t for inodes in tracepoints kernfs: fix ino wrap-around detection kselftests: cgroup: Avoid the reuse of fd after it is deallocated cgroup: freezer: don't change task and cgroups status unnecessarily cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency cgroup: remove cgroup_enable_task_cg_lists() optimization cgroup: pids: use atomic64_t for pids->limit selftests: cgroup: Run test_core under interfering stress selftests: cgroup: Add task migration tests ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue updates from Tejun Heo: "There have been sporadic reports of sanity checks in destroy_workqueue() failing spuriously over the years. This contains the fix and its follow-up changes / fixes. There's also a RCU annotation improvement" * 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Add RCU annotation for pwq list walk workqueue: Fix pwq ref leak in rescuer_thread() workqueue: more destroy_workqueue() fixes workqueue: Minor follow-ups to the rescuer destruction change workqueue: Fix missing kfree(rescuer) in destroy_workqueue() workqueue: Fix spurious sanity check failures in destroy_workqueue()
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux由 Linus Torvalds 提交于
Pull thread management updates from Christian Brauner: - A pidfd's fdinfo file currently contains the field "Pid:\t<pid>" where <pid> is the pid of the process in the pid namespace of the procfs instance the fdinfo file for the pidfd was opened in. The fdinfo file has now gained a new "NSpid:\t<ns-pid1>[\t<ns-pid2>[...]]" field which lists the pids of the process in all child pid namespaces provided the pid namespace of the procfs instance it is looked up under has an ancestoral relationship with the pid namespace of the process. If it does not 0 will be shown and no further pid namespaces will be listed. Tests included. (Christian Kellner) - If the process the pidfd references has already exited, print -1 for the Pid and NSpid fields in the pidfd's fdinfo file. Tests included. (me) - Add CLONE_CLEAR_SIGHAND. This lets callers clear all signal handler that are not SIG_DFL or SIG_IGN at process creation time. This originated as a feature request from glibc to improve performance and elimate races in their posix_spawn() implementation. Tests included. (me) - Add support for choosing a specific pid for a process with clone3(). This is the feature which was part of the thread update for v5.4 but after a discussion at LPC in Lisbon we decided to delay it for one more cycle in order to make the interface more generic. This has now done. It is now possible to choose a specific pid in a whole pid namespaces (sub)hierarchy instead of just one pid namespace. In order to choose a specific pid the caller must have CAP_SYS_ADMIN in all owning user namespaces of the target pid namespaces. Tests included. (Adrian Reber) - Test improvements and extensions. (Andrei Vagin, me) * tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests/clone3: skip if clone3() is ENOSYS selftests/clone3: check that all pids are released on error paths selftests/clone3: report a correct number of fails selftests/clone3: flush stdout and stderr before clone3() and _exit() selftests: add tests for clone3() with *set_tid fork: extend clone3() to support setting a PID selftests: add tests for clone3() tests: test CLONE_CLEAR_SIGHAND clone3: add CLONE_CLEAR_SIGHAND pid: use pid_has_task() in pidfd_open() exit: use pid_has_task() in do_wait() pid: use pid_has_task() in __change_pid() test: verify fdinfo for pidfd of reaped process pidfd: check pid has attached task in fdinfo pidfd: add tests for NSpid info in fdinfo pidfd: add NSpid entries to fdinfo
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras由 Linus Torvalds 提交于
Pull EDAC updates from Borislav Petkov: "A lot of changes this time around, details below. From the next cycle onwards, we'll switch the EDAC tree to topic branches (instead of a single edac-for-next branch) which should make the changes handling more flexible, hopefully. We'll see. Summary: - Rework error logging functions to accept a count of errors parameter (Hanna Hawa) - Part one of substantial EDAC core + ghes_edac driver cleanup (Robert Richter) - Print additional useful logging information in skx_* (Tony Luck) - Improve amd64_edac hw detection + cleanups (Yazen Ghannam) - Misc cleanups, fixes and code improvements" * tag 'edac_for_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (35 commits) EDAC/altera: Use the Altera System Manager driver EDAC/altera: Cleanup the ECC Manager EDAC/altera: Use fast register IO for S10 IRQs EDAC/ghes: Do not warn when incrementing refcount on 0 EDAC/Documentation: Describe CPER module definition and DIMM ranks EDAC: Unify the mc_event tracepoint call EDAC/ghes: Remove intermediate buffer pvt->detail_location EDAC/ghes: Fix grain calculation EDAC/ghes: Use standard kernel macros for page calculations EDAC: Remove misleading comment in struct edac_raw_error_desc EDAC/mc: Reduce indentation level in edac_mc_handle_error() EDAC/mc: Remove needless zero string termination EDAC/mc: Do not BUG_ON() in edac_mc_alloc() EDAC: Introduce an mci_for_each_dimm() iterator EDAC: Remove EDAC_DIMM_OFF() macro EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() function EDAC/amd64: Get rid of the ECC disabled long message EDAC/ghes: Fix locking and memory barrier issues EDAC/amd64: Check for memory before fully initializing an instance EDAC/amd64: Use cached data when checking for ECC ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Paolo Bonzini: "ARM: - data abort report and injection - steal time support - GICv4 performance improvements - vgic ITS emulation fixes - simplify FWB handling - enable halt polling counters - make the emulated timer PREEMPT_RT compliant s390: - small fixes and cleanups - selftest improvements - yield improvements PPC: - add capability to tell userspace whether we can single-step the guest - improve the allocation of XIVE virtual processor IDs - rewrite interrupt synthesis code to deliver interrupts in virtual mode when appropriate. - minor cleanups and improvements. x86: - XSAVES support for AMD - more accurate report of nested guest TSC to the nested hypervisor - retpoline optimizations - support for nested 5-level page tables - PMU virtualization optimizations, and improved support for nested PMU virtualization - correct latching of INITs for nested virtualization - IOAPIC optimization - TSX_CTRL virtualization for more TAA happiness - improved allocation and flushing of SEV ASIDs - many bugfixes and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints KVM: x86: Grab KVM's srcu lock when setting nested state KVM: x86: Open code shared_msr_update() in its only caller KVM: Fix jump label out_free_* in kvm_init() KVM: x86: Remove a spurious export of a static function KVM: x86: create mmu/ subdirectory KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page KVM: x86: remove set but not used variable 'called' KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID KVM: x86: do not modify masked bits of shared MSRs KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT KVM: x86: Unexport kvm_vcpu_reload_apic_access_page() KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1 KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen updates from Juergen Gross: - a small series to remove the build constraint of Xen x86 MCE handling to 64-bit only - a bunch of minor cleanups * tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix Kconfig indentation xen/mcelog: also allow building for 32-bit kernels xen/mcelog: add PPIN to record when available xen/mcelog: drop __MC_MSR_MCGCAP xen/gntdev: Use select for DMA_SHARED_BUFFER xen: mm: make xen_mm_init static xen: mm: include <xen/xen-ops.h> for missing declarations
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux由 Linus Torvalds 提交于
Pull MIPS updates from Paul Burton: "The main MIPS changes for 5.5: - Atomics-related code sees some rework & cleanup, most notably allowing Loongson LL/SC errata workarounds to be more bulletproof & their correctness to be checked at build time. - Command line setup code is simplified somewhat, resolving various corner cases. - MIPS kernels can now be built with kcov code coverage support. - We can now build with CONFIG_FORTIFY_SOURCE=y. - Miscellaneous cleanups. And some platform specific changes: - We now disable some broken TLB functionality on certain Ingenic systems, and JZ4780 systems gain some devicetree nodes to support more devices. - Loongson support sees a number of cleanups, and we gain initial support for Loongson 3A R4 systems. - We gain support for MediaTek MT7688-based GARDENA Smart Gateway systems. - SGI IP27 (Origin 2*) see a number of fixes, cleanups & simplifications. - SGI IP30 (Octane) systems are now supported" * tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits) MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module MIPS: PCI: Fix fake subdevice ID for IOC3 MIPS: Ingenic: Disable abandoned HPTLB function. MIPS: PCI: remember nasid changed by set interrupt affinity MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter mips: add support for folded p4d page tables mips: drop __pXd_offset() macros that duplicate pXd_index() ones mips: fix build when "48 bits virtual memory" is enabled MIPS: math-emu: Reuse name array in debugfs_fpuemu() MIPS: allow building with kcov coverage MIPS: Loongson64: Drop setup_pcimap MIPS: Loongson2ef: Convert to early_printk_8250 MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline MIPS: Drop pmon.h MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage MIPS: Loongson: Rename LOONGSON1 to LOONGSON32 MIPS: Loongson: Fix return value of loongson_hwmon_init MIPS: add support for SGI Octane (IP30) MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven: - Atari Falcon IDE platform driver conversion for module autoload - defconfig updates (including enablement of Amiga ICY I2C) - small fixes and cleanups * tag 'm68k-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/atari: Convert Falcon IDE drivers to platform drivers m68k: defconfig: Enable ICY I2C and LTC2990 on Amiga m68k: defconfig: Update defconfigs for v5.4-rc1 m68k: q40: Fix info-leak in rtc_ioctl nubus: Remove cast to void pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Borislav Petkov: - Fully reworked thermal throttling notifications, there should be no more spamming of dmesg (Srinivas Pandruvada and Benjamin Berg) - More enablement for the Intel-compatible CPUs Zhaoxin (Tony W Wang-oc) - PPIN support for Icelake (Tony Luck) * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/therm_throt: Optimize notifications of thermal throttle x86/mce: Add Xeon Icelake to list of CPUs that support PPIN x86/mce: Lower throttling MCE messages' priority to warning x86/mce: Add Zhaoxin LMCE support x86/mce: Add Zhaoxin CMCI support x86/mce: Add Zhaoxin MCE support x86/mce/amd: Make disable_err_thresholding() static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 microcode updates from Borislav Petkov: "This converts the late loading method to load the microcode in parallel (vs sequentially currently). The patch remained in linux-next for the maximum amount of time so that any potential and hard to debug fallout be minimized. Now cloud folks have their milliseconds back but all the normal people should use early loading anyway :-)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/intel: Issue the revision updated message only on the BSP x86/microcode: Update late microcode in parallel x86/microcode/amd: Fix two -Wunused-but-set-variable warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Vasily Gorbik: - Adjust PMU device drivers registration to avoid WARN_ON and few other perf improvements. - Enhance tracing in vfio-ccw. - Few stack unwinder fixes and improvements, convert get_wchan custom stack unwinding to generic api usage. - Fixes for mm helpers issues uncovered with tests validating architecture page table helpers. - Fix noexec bit handling when hardware doesn't support it. - Fix memleak and unsigned value compared with zero bugs in crypto code. Minor code simplification. - Fix crash during kdump with kasan enabled kernel. - Switch bug and alternatives from asm to asm_inline to improve inlining decisions. - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add z13s and z14 ZR1 to TUNE descriptions. - Minor head64.S simplification. - Fix physical to logical CPU map for SMT. - Several cleanups in qdio code. - Other minor cleanups and fixes all over the code. * tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/cpumf: Adjust registration of s390 PMU device drivers s390/smp: fix physical to logical CPU map for SMT s390/early: move access registers setup in C code s390/head64: remove unnecessary vdso_per_cpu_data setup s390/early: move control registers setup in C code s390/kasan: support memcpy_real with TRACE_IRQFLAGS s390/crypto: Fix unsigned variable compared with zero s390/pkey: use memdup_user() to simplify code s390/pkey: fix memory leak within _copy_apqns_from_user() s390/disassembler: don't hide instruction addresses s390/cpum_sf: Assign error value to err variable s390/cpum_sf: Replace function name in debug statements s390/cpum_sf: Use consistant debug print format for sampling s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr() s390: add error handling to perf_callchain_kernel s390: always inline current_stack_pointer() s390/mm: add mm_pxd_folded() checks to pxd_free() s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported s390/mm: simplify page table helpers for large entries s390/mm: make pmd/pud_bad() report large entries as bad ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 updates from Catalin Marinas: "Apart from the arm64-specific bits (core arch and perf, new arm64 selftests), it touches the generic cow_user_page() (reviewed by Kirill) together with a macro for x86 to preserve the existing behaviour on this architecture. Summary: - On ARMv8 CPUs without hardware updates of the access flag, avoid failing cow_user_page() on PFN mappings if the pte is old. The patches introduce an arch_faults_on_old_pte() macro, defined as false on x86. When true, cow_user_page() makes the pte young before attempting __copy_from_user_inatomic(). - Covert the synchronous exception handling paths in arch/arm64/kernel/entry.S to C. - FTRACE_WITH_REGS support for arm64. - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4 - Several kselftest cases specific to arm64, together with a MAINTAINERS update for these files (moved to the ARM64 PORT entry). - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale instructions under certain conditions. - Workaround for Cortex-A57 and A72 errata where the CPU may speculatively execute an AT instruction and associate a VMID with the wrong guest page tables (corrupting the TLB). - Perf updates for arm64: additional PMU topologies on HiSilicon platforms, support for CCN-512 interconnect, AXI ID filtering in the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2. - GICv3 optimisation to avoid a heavy barrier when accessing the ICC_PMR_EL1 register. - ELF HWCAP documentation updates and clean-up. - SMC calling convention conduit code clean-up. - KASLR diagnostics printed during boot - NVIDIA Carmel CPU added to the KPTI whitelist - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale macro, simplify calculation in __create_pgd_mapping(), typos. - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for endinanness to help with allmodconfig" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64: Kconfig: add a choice for endianness kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous" arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry arm64: kaslr: Check command line before looking for a seed arm64: kaslr: Announce KASLR status on boot kselftest: arm64: fake_sigreturn_misaligned_sp kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: add helper get_current_context kselftest: arm64: extend test_init functionalities kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: extend toplevel skeleton Makefile drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform arm64: mm: reserve CMA and crashkernel in ZONE_DMA32 ...
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest KUnit support gtom Shuah Khan: "This adds KUnit, a lightweight unit testing and mocking framework for the Linux kernel from Brendan Higgins. KUnit is not an end-to-end testing framework. It is currently supported on UML and sub-systems can write unit tests and run them in UML env. KUnit documentation is included in this update. In addition, this Kunit update adds 3 new kunit tests: - proc sysctl test from Iurii Zaikin - the 'list' doubly linked list test from David Gow - ext4 tests for decoding extended timestamps from Iurii Zaikin In the future KUnit will be linked to Kselftest framework to provide a way to trigger KUnit tests from user-space" * tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) lib/list-test: add a test for the 'list' doubly linked list ext4: add kunit test for decoding extended timestamps Documentation: kunit: Fix verification command kunit: Fix '--build_dir' option kunit: fix failure to build without printk MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec() MAINTAINERS: add entry for KUnit the unit testing framework Documentation: kunit: add documentation for KUnit kunit: defconfig: add defconfigs for building KUnit tests kunit: tool: add Python wrappers for running KUnit tests kunit: test: add tests for KUnit managed resources kunit: test: add the concept of assertions kunit: test: add tests for kunit test abort kunit: test: add support for test abort objtool: add kunit_try_catch_throw to the noreturn list kunit: test: add initial tests lib: enable building KUnit in lib/ kunit: test: add the concept of expectations kunit: test: add assertion printing library ...
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of several fixes to tests and framework. Masami Hiramatsu fixed several tests to build and run correctly on arm and other 32bit architectures" * tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: sync: Fix cast warnings on arm selftests: net: Fix printf format warnings on arm selftests: net: Use size_t and ssize_t for counting file size selftests: vm: Build/Run 64bit tests only on 64bit arch selftests: proc: Make va_max 1MB kselftest: Fix NULL INSTALL_PATH for TARGETS runlist selftests: Move kselftest_module.sh into kselftest/ selftests: gen_kselftest_tar.sh: Do not clobber kselftest/ selftests: breakpoints: Fix a typo of function name selftests: Fix O= and KBUILD_OUTPUT handling for relative paths
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt由 Linus Torvalds 提交于
Pull fsverity updates from Eric Biggers: "Expose the fs-verity bit through statx()" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: docs: fs-verity: mention statx() support f2fs: support STATX_ATTR_VERITY ext4: support STATX_ATTR_VERITY statx: define STATX_ATTR_VERITY docs: fs-verity: document first supported kernel version
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt由 Linus Torvalds 提交于
Pull fscrypt updates from Eric Biggers: - Add the IV_INO_LBLK_64 encryption policy flag which modifies the encryption to be optimized for UFS inline encryption hardware. - For AES-128-CBC, use the crypto API's implementation of ESSIV (which was added in 5.4) rather than doing ESSIV manually. - A few other cleanups. * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add support for IV_INO_LBLK_64 encryption policies ext4: add support for IV_INO_LBLK_64 encryption policies fscrypt: add support for IV_INO_LBLK_64 policies fscrypt: avoid data race on fscrypt_mode::logged_impl_name docs: ioctl-number: document fscrypt ioctl numbers fscrypt: zeroize fscrypt_info before freeing fscrypt: remove struct fscrypt_ctx fscrypt: invoke crypto API for ESSIV handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull AFFS updates from David Sterba: "A minor bugfix and cleanup for AFFS" * tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix a memory leak in affs_remount affs: Replace binary semaphores with mutexes
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs updates from David Sterba: "User visible changes: - new block group profiles: RAID1 with 3- and 4- copies - RAID1 in btrfs has always 2 copies, now add support for 3 and 4 - this is an incompat feature (named RAID1C34) - recommended use of RAID1C3 is replacement of RAID6 profile on metadata, this brings a more reliable resiliency against 2 device loss/damage - support for new checksums - per-filesystem, set at mkfs time - fast hash (crc32c successor): xxhash, 64bit digest - strong hashes (both 256bit): sha256 (slower, FIPS), blake2b (faster) - the blake2b module goes via the crypto tree, btrfs.ko has a soft dependency - speed up lseek, don't take inode locks unnecessarily, this can speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80% - send: - allow clone operations within the same file - limit maximum number of sent clone references to avoid slow backref walking - error message improvements: device scan prints process name and PID Core changes: - cleanups - remove unique workqueue helpers, used to provide a way to avoid deadlocks in the workqueue code, now done in a simpler way - remove lots of indirect function calls in compression code - extent IO tree code moved out of extent_io.c - cleanup backup superblock handling at mount time - transaction life cycle documentation and cleanups - locking code cleanups, annotations and documentation - add more cold, const, pure function attributes - removal of unused or redundant struct members or variables - new tree-checker sanity tests - try to detect missing INODE_ITEM, cross-reference checks of DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items - remove own bio scheduling code (used to avoid checksum submissions being stuck behind other IO), replaced by cgroup controller-based code to allow better control and avoid priority inversions in cases where the custom and cgroup scheduling disagreed Fixes: - avoid getting stuck during cyclic writebacks - fix trimming of ranges crossing block group boundaries - fix rename exchange on subvolumes, all involved subvolumes need to be recorded in the transaction" * tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits) btrfs: drop bdev argument from submit_extent_page btrfs: remove extent_map::bdev btrfs: drop bio_set_dev where not needed btrfs: get bdev directly from fs_devices in submit_extent_page btrfs: record all roots for rename exchange on a subvol Btrfs: fix block group remaining RO forever after error during device replace btrfs: scrub: Don't check free space before marking a block group RO btrfs: change btrfs_fs_devices::rotating to bool btrfs: change btrfs_fs_devices::seeding to bool btrfs: rename btrfs_block_group_cache btrfs: block-group: Reuse the item key from caller of read_one_block_group() btrfs: block-group: Refactor btrfs_read_block_groups() btrfs: document extent buffer locking btrfs: access eb::blocking_writers according to ACCESS_ONCE policies btrfs: set blocking_writers directly, no increment or decrement btrfs: merge blocking_writers branches in btrfs_tree_read_lock btrfs: drop incompat bit for raid1c34 after last block group is gone btrfs: add incompat for raid1 with 3, 4 copies btrfs: add support for 4-copy replication (raid1c4) btrfs: add support for 3-copy replication (raid1c3) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux由 Linus Torvalds 提交于
Pull MTD updates from Miquel Raynal: "MTD core: - drop inactive maintainers, update the repositories and add IRC channel - debugfs functions improvements - initialize more structure parameters - misc fixes reported by robots MTD devices: - spear_smi: Fixed Write Burst mode - new Intel IXP4xx flash probing hook Raw NAND core: - useless extra checks dropped - update the detection of the bad block markers position Raw NAND controller drivers: - Cadence: new driver - Brcmnand: support for flash-dma v0 + fixes - Denali: drop support for the legacy controller/chip DT representation - superfluous dev_err() calls removed SPI NOR core changes: - introduce 'struct spi_nor_controller_ops' - clean the Register Operations methods - use dev_dbg insted of dev_err for low level info - fix retlen handling in sst_write() - fix silent truncations in spi_nor_read and spi_nor_read_raw() - fix the clearing of QE bit on lock()/unlock() - rework the disabling of the block write protection - rework the Quad Enable methods - make sure nor->spimem and nor->controller_ops are mutually exclusive - set default Quad Enable method for ISSI flashes - add support for few flashes SPI NOR controller drivers changes: - intel-spi: - support chips without software sequencer - add support for Intel Cannon Lake and Intel Comet Lake-H flashes CFI core changes: - code cleanups related useless initializers and coding style issues - fix for a possible double free problem in cfi_cmdset_0002 - improved HyperFlash error reporting and handling in cfi_cmdset_0002 core" * tag 'mtd/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (73 commits) mtd: devices: fix mchp23k256 read and write mtd: no need to check return value of debugfs_create functions mtd: spi-nor: Set default Quad Enable method for ISSI flashes mtd: spi-nor: Add support for is25wp256 mtd: spi-nor: Add support for w25q256jw mtd: spi-nor: Move condition to avoid a NULL check mtd: spi-nor: Make sure nor->spimem and nor->controller_ops are mutually exclusive mtd: spi-nor: Rename Quad Enable methods mtd: spi-nor: Merge spansion Quad Enable methods mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1 mtd: spi-nor: Extend the SR Read Back test mtd: spi-nor: Rework the disabling of block write protection mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlash mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status() mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup() mtd: cfi_cmdset_*: kill useless 'ret' variable initializers mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay() mtd: spi-nor: Print debug message when the read back test fails mtd: spi-nor: Check all the bits written, not just the BP ones ...
-
由 Linus Torvalds 提交于
Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix DM core to disallow stacking request-based DM on partitions. - Fix DM raid target to properly resync raidset even if bitmap needed additional pages. - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the IO and crypt workqueues. - Fix DM integrity metadata layout that was aligned on 128K boundary rather than the intended 4K boundary (removes 124K of wasted space for each metadata block). - Improve the DM thin, cache and clone targets to use spin_lock_irq rather than spin_lock_irqsave where possible. - Fix DM thin single thread performance that was lost due to needless workqueue wakeups. - Fix DM zoned target performance that was lost due to excessive backing device checks. - Add ability to trigger write failure with the DM dust test target. - Fix whitespace indentation in drivers/md/Kconfig. - Various smalls fixes and cleanups (e.g. use struct_size, fix uninitialized variable, variable renames, etc). * tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues" dm: Fix Kconfig indentation dm thin: wakeup worker only when deferred bios exist dm integrity: fix excessive alignment of metadata runs dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout dm zoned: reduce overhead of backing device checks dm dust: add limited write failure mode dm dust: change ret to r in dust_map_read and dust_map dm dust: change result vars to r dm cache: replace spin_lock_irqsave with spin_lock_irq dm bio prison: replace spin_lock_irqsave with spin_lock_irq dm thin: replace spin_lock_irqsave with spin_lock_irq dm clone: add bucket_lock_irq/bucket_unlock_irq helpers dm clone: replace spin_lock_irqsave with spin_lock_irq dm writecache: handle REQ_FUA dm writecache: fix uninitialized variable warning dm stripe: use struct_size() in kmalloc() dm raid: streamline rs_get_progress() and its raid_status() caller side dm raid: simplify rs_setup_recovery call chain dm raid: to ensure resynchronization, perform raid set grow in preresume ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull disk revalidation updates from Jens Axboe: "This continues the work that Jan Kara started to thoroughly cleanup and consolidate how we handle rescans and revalidations" * tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block: block: move clearing bd_invalidated into check_disk_size_change block: remove (__)blkdev_reread_part as an exported API block: fix bdev_disk_changed for non-partitioned devices block: move rescan_partitions to fs/block_dev.c block: merge invalidate_partitions into rescan_partitions block: refactor rescan_partitions
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull zoned block device update from Jens Axboe: "Enhancements and improvements to the zoned device support" * tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block: scsi: sd_zbc: Remove set but not used variable 'buflen' block: rework zone reporting scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer() null_blk: Add zone_nr_conv to features null_blk: clean up report zones null_blk: clean up the block device operations block: Remove partition support for zoned block devices block: Simplify report zones execution block: cleanup the !zoned case in blk_revalidate_disk_zones block: Enhance blk_revalidate_disk_zones()
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block driver updates from Jens Axboe: "Here are the main block driver updates for 5.5. Nothing major in here, mostly just fixes. This contains: - a set of bcache changes via Coly - MD changes from Song - loop unmap write-zeroes fix (Darrick) - spelling fixes (Geert) - zoned additions cleanups to null_blk/dm (Ajay) - allow null_blk online submit queue changes (Bart) - NVMe changes via Keith, nothing major here either" * tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits) Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()" drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET bcache: don't export symbols bcache: remove the extra cflags for request.o bcache: at least try to shrink 1 node in bch_mca_scan() bcache: add idle_max_writeback_rate sysfs interface bcache: add code comments in bch_btree_leaf_dirty() bcache: fix deadlock in bcache_allocator bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add more accurate error messages in read_super() bcache: fix static checker warning in bcache_device_free() bcache: fix a lost wake-up problem caused by mca_cannibalize_lock bcache: fix fifo index swapping condition in journal_pin_cmp() md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load null_blk: add zone open, close, and finish support dm: add zone open, close and finish support ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull core block updates from Jens Axboe: "Due to more granular branches, this one is small and will be followed with other core branches that add specific features. I meant to just have a core and drivers branch, but external dependencies we ended up adding a few more that are also core. The changes are: - Fixes and improvements for the zoned device support (Ajay, Damien) - sed-opal table writing and datastore UID (Revanth) - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun) - Improvements to the block stats tracking (Pavel) - Fix for overruning sysfs buffer for large number of CPUs (Ming) - Optimization for small IO (Ming, Christoph) - Fix typo in RWH lifetime hint (Eugene) - Dead code removal and documentation (Bart) - Reduction in memory usage for queue and tag set (Bart) - Kerneldoc header documentation (André) - Device/partition revalidation fixes (Jan) - Stats tracking for flush requests (Konstantin) - Various other little fixes here and there (et al)" * tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits) Revert "block: split bio if the only bvec's length is > SZ_4K" block: add iostat counters for flush requests block,bfq: Skip tracing hooks if possible block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64' blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1 block: Don't disable interrupts in trigger_softirq() sbitmap: Delete sbitmap_any_bit_clear() blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue() block: split bio if the only bvec's length is > SZ_4K block: still try to split bio if the bvec crosses pages blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT blk-cgroup: reimplement basic IO stats using cgroup rstat blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive() blk-throtl: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: relocate bfqg_*rwstat*() helpers block: add zone open, close and finish ioctl support block: add zone open, close and finish operations block: Simplify REQ_OP_ZONE_RESET_ALL handling block: Remove REQ_OP_ZONE_RESET plugging ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull libata updates from Jens Axboe: "Just a few fixes all over the place, support for the Annapurna SATA controller, and a patchset that cleans up the error defines and ultimately fixes anissue with sata_mv" * tag 'for-5.5/libata-20191121' of git://git.kernel.dk/linux-block: ata: pata_artop: make arrays static const, makes object smaller ata_piix: remove open-coded dmi_match(DMI_OEM_STRING) ata: sata_mv, avoid trigerrable BUG_ON ata: make qc_prep return ata_completion_errors ata: define AC_ERR_OK ata: Documentation, fix function names libata: Ensure ata_port probe has completed before detach ahci: tegra: use regulator_bulk_set_supply_names() ahci: Add support for Amazon's Annapurna Labs SATA controller
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull io_uring updates from Jens Axboe: "A lot of stuff has been going on this cycle, with improving the support for networked IO (and hence unbounded request completion times) being one of the major themes. There's been a set of fixes done this week, I'll send those out as well once we're certain we're fully happy with them. This contains: - Unification of the "normal" submit path and the SQPOLL path (Pavel) - Support for sparse (and bigger) file sets, and updating of those file sets without needing to unregister/register again. - Independently sized CQ ring, instead of just making it always 2x the SQ ring size. This makes it more flexible for networked applications. - Support for overflowed CQ ring, never dropping events but providing backpressure on submits. - Add support for absolute timeouts, not just relative ones. - Support for generic cancellations. This divorces io_uring from workqueues as well, which additionally gets us one step closer to generic async system call support. - With cancellations, we can support grabbing the process file table as well, just like we do mm context. This allows support for system calls that create file descriptors, like accept4() support that's built on top of that. - Support for io_uring tracing (Dmitrii) - Support for linked timeouts. These abort an operation if it isn't completed by the time noted in the linke timeout. - Speedup tracking of poll requests - Various cleanups making the coder easier to follow (Jackie, Pavel, Bob, YueHaibing, me) - Update MAINTAINERS with new io_uring list" * tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits) io_uring: make POLL_ADD/POLL_REMOVE scale better io-wq: remove now redundant struct io_wq_nulls_list io_uring: Fix getting file for non-fd opcodes io_uring: introduce req_need_defer() io_uring: clean up io_uring_cancel_files() io-wq: ensure free/busy list browsing see all items io-wq: ensure we have a stable view of ->cur_work for cancellations io_wq: add get/put_work handlers to io_wq_create() io_uring: check for validity of ->rings in teardown io_uring: fix potential deadlock in io_poll_wake() io_uring: use correct "is IO worker" helper io_uring: fix -ENOENT issue with linked timer with short timeout io_uring: don't do flush cancel under inflight_lock io_uring: flag SQPOLL busy condition to userspace io_uring: make ASYNC_CANCEL work with poll and timeout io_uring: provide fallback request for OOM situations io_uring: convert accept4() -ERESTARTSYS into -EINTR io_uring: fix error clear of ->file_table in io_sqe_files_register() io_uring: separate the io_free_req and io_free_req_find_next interface io_uring: keep io_put_req only responsible for release and put req ...
-
git://git.infradead.org/users/jjs/linux-tpmdd由 Linus Torvalds 提交于
Pull tpmd updates from Jarkko Sakkinen: - support for Cr50 fTPM - support for fTPM on AMD Zen+ CPUs - TPM 2.0 trusted keys code relocated from drivers/char/tpm to security/keys * tag 'tpmdd-next-20191112' of git://git.infradead.org/users/jjs/linux-tpmdd: KEYS: trusted: Remove set but not used variable 'keyhndl' tpm: Switch to platform_get_irq_optional() tpm_crb: fix fTPM on AMD Zen+ CPUs KEYS: trusted: Move TPM2 trusted keys code KEYS: trusted: Create trusted keys subsystem KEYS: Use common tpm_buf for trusted and asymmetric keys tpm: Move tpm_buf code to include/linux/ tpm: use GFP_KERNEL instead of GFP_HIGHMEM for tpm_buf tpm: add check after commands attribs tab allocation tpm: tpm_tis_spi: Drop THIS_MODULE usage from driver struct tpm: tpm_tis_spi: Cleanup includes tpm: tpm_tis_spi: Support cr50 devices tpm: tpm_tis_spi: Introduce a flow control callback tpm: Add a flag to indicate TPM power is managed by firmware dt-bindings: tpm: document properties for cr50 tpm_tis: override durations for STM tpm with firmware 1.2.8.28 tpm: provide a way to override the chip returned durations tpm: Remove duplicate code from caps_show() in tpm-sysfs.c
-
由 Linus Torvalds 提交于
fdget_pos() is used by file operations that will read and update f_pos: things like "read()", "write()" and "lseek()" (but not, for example, "pread()/pwrite" that get their file positions elsewhere). However, it had two separate escape clauses for this, because not everybody wants or needs serialization of the file position. The first and most obvious case is the "file descriptor doesn't have a position at all", ie a stream-like file. Except we didn't actually use FMODE_STREAM, but instead used FMODE_ATOMIC_POS. The reason for that was that FMODE_STREAM didn't exist back in the days, but also that we didn't want to mark all the special cases, so we only marked the ones that _required_ position atomicity according to POSIX - regular files and directories. The case one was intentionally lazy, but now that we _do_ have FMODE_STREAM we could and should just use it. With the change to use FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all the code to set it is deleted. Any cases where we don't want the serialization because the driver (or subsystem) doesn't use the file position should just be updated to do "stream_open()". We've done that for all the obvious and common situations, we may need a few more. Quoting Kirill Smelkov in the original FMODE_STREAM thread (see link below for full email): "And I appreciate if people could help at least somehow with "getting rid of mixed case entirely" (i.e. always lock f_pos_lock on !FMODE_STREAM), because this transition starts to diverge from my particular use-case too far. To me it makes sense to do that transition as follows: - convert nonseekable_open -> stream_open via stream_open.cocci; - audit other nonseekable_open calls and convert left users that truly don't depend on position to stream_open; - extend stream_open.cocci to analyze alloc_file_pseudo as well (this will cover pipes and sockets), or maybe convert pipes and sockets to FMODE_STREAM manually; - extend stream_open.cocci to analyze file_operations that use no_llseek or noop_llseek, but do not use nonseekable_open or alloc_file_pseudo. This might find files that have stream semantic but are opened differently; - extend stream_open.cocci to analyze file_operations whose .read/.write do not use ppos at all (independently of how file was opened); - ... - after that remove FMODE_ATOMIC_POS and always take f_pos_lock if !FMODE_STREAM; - gather bug reports for deadlocked read/write and convert missed cases to FMODE_STREAM, probably extending stream_open.cocci along the road to catch similar cases i.e. always take f_pos_lock unless a file is explicitly marked as being stream, and try to find and cover all files that are streams" We have not done the "extend stream_open.cocci to analyze alloc_file_pseudo" as well, but the previous commit did manually handle the case of pipes and sockets. The other case where we can avoid locking f_pos is the "this file descriptor only has a single user and it is us, and thus there is no need to lock it". The second test was correct, although a bit subtle and worth just re-iterating here. There are two kinds of other sources of references to the same file descriptor: file descriptors that have been explicitly shared across fork() or with dup(), and file tables having elevated reference counts due to threading (or explicit file sharing with clone()). The first case would have incremented the file count explicitly, and in the second case the previous __fdget() would have incremented it for us and set the FDPUT_FPUT flag. But in both cases the file count would be greater than one, so the "file_count(file) > 1" test catches both situations. Also note that if file_count is 1, that also means that no other thread can have access to the file table, so there also cannot be races with concurrent calls to dup()/fork()/clone() that would increment the file count any other way. Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Eic Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marco Elver <elver@google.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Paul McKenney <paulmck@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
In commit 3975b097 ("convert stream-like files -> stream_open, even if they use noop_llseek") Kirill used a coccinelle script to change "nonseekable_open()" to "stream_open()", which changed the trivial cases of stream-like file descriptors to the new model with FMODE_STREAM. However, the two big cases - sockets and pipes - don't actually have that trivial pattern at all, and were thus never converted to FMODE_STREAM even though it makes lots of sense to do so. That's particularly true when looking forward to the next change: getting rid of FMODE_ATOMIC_POS entirely, and just using FMODE_STREAM to decide whether f_pos updates are needed or not. And if they are, we'll always do them atomically. This came up because KCSAN (correctly) noted that the non-locked f_pos updates are data races: they are clearly benign for the case where we don't care, but it would be good to just not have that issue exist at all. Note that the reason we used FMODE_ATOMIC_POS originally is that only doing it for the minimal required case is "safer" in that it's possible that the f_pos locking can cause unnecessary serialization across the whole write() call. And in the worst case, that kind of serialization can cause deadlock issues: think writers that need readers to empty the state using the same file descriptor. [ Note that the locking is per-file descriptor - because it protects "f_pos", which is obviously per-file descriptor - so it only affects cases where you literally use the same file descriptor to both read and write. So a regular pipe that has separate reading and writing file descriptors doesn't really have this situation even though it's the obvious case of "reader empties what a bit writer concurrently fills" But we want to make pipes as being stream-line anyway, because we don't want the unnecessary overhead of locking, and because a named pipe can be (ab-)used by reading and writing to the same file descriptor. ] There are likely a lot of other cases that might want FMODE_STREAM, and looking for ".llseek = no_llseek" users and other cases that don't have an lseek file operation at all and making them use "stream_open()" might be a good idea. But pipes and sockets are likely to be the two main cases. Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Eic Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Marco Elver <elver@google.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Paul McKenney <paulmck@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 11月, 2019 4 次提交
-
-
由 Qian Cai 提交于
The commit f05499a0 ("writeback: use ino_t for inodes in tracepoints") introduced a lot of GCC compilation warnings on s390, In file included from ./include/trace/define_trace.h:102, from ./include/trace/events/writeback.h:904, from fs/fs-writeback.c:82: ./include/trace/events/writeback.h: In function 'trace_raw_output_writeback_page_template': ./include/trace/events/writeback.h:76:12: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'ino_t' {aka 'unsigned int'} [-Wformat=] TP_printk("bdi %s: ino=%lu index=%lu", ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/trace/trace_events.h:360:22: note: in definition of macro 'DECLARE_EVENT_CLASS' trace_seq_printf(s, print); \ ^~~~~ ./include/trace/events/writeback.h:76:2: note: in expansion of macro 'TP_printk' TP_printk("bdi %s: ino=%lu index=%lu", ^~~~~~~~~ Fix them by adding necessary casts where ino_t could be either "unsigned int" or "unsigned long". Fixes: f05499a0 ("writeback: use ino_t for inodes in tracepoints") Signed-off-by: NQian Cai <cai@lca.pw> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-ppc-next-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD Second KVM PPC update for 5.5 - Two fixes from Greg Kurz to fix memory leak bugs in the XIVE code.
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull cramfs fix from Al Viro: "Regression fix, fallen through the cracks" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cramfs: fix usage on non-MTD device
-
- 24 11月, 2019 5 次提交
-
-
由 Krzysztof Kozlowski 提交于
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Maxime Bizon 提交于
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if we fail to mount on MTD, we don't try on block device. Note: this relies upon cramfs_mtd_fill_super() leaving no side effects on fc state in case of failure; in general, failing get_tree_...() does *not* mean "fine to try again"; e.g. parsed options might've been consumed by fill_super callback and freed on failure. Fixes: 74f78fc5 ("vfs: Convert cramfs to use the new mount API") Signed-off-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Thomas Bogendoerfer 提交于
PROM only enables ethernet PHY on first Origin 200 module, so we must do it ourselves for the second module. Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: NPaul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
-
由 Thomas Bogendoerfer 提交于
Generation of fake subdevice ID had vendor and device ID swapped. Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: NPaul Burton <paulburton@kernel.org> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: David S. Miller <davem@davemloft.net> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull last minute virtio bugfixes from Michael Tsirkin: "Minor bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix shrinker count virtio_balloon: fix shrinker scan number of pages virtio_console: allocate inbufs in add_port() only if it is needed virtio_ring: fix return code on DMA mapping fails
-
- 23 11月, 2019 1 次提交
-
-
由 Jim Mattson 提交于
Commit 37e4c997 ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") broke the KVM_SET_MSRS ABI by instituting new constraints on the data values that kvm would accept for the guest MSR, IA32_FEATURE_CONTROL. Perhaps these constraints should have been opt-in via a new KVM capability, but they were applied indiscriminately, breaking at least one existing hypervisor. Relax the constraints to allow either or both of FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX and FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX to be set when nVMX is enabled. This change is sufficient to fix the aforementioned breakage. Fixes: 37e4c997 ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL") Signed-off-by: NJim Mattson <jmattson@google.com> Reviewed-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-