- 04 7月, 2008 15 次提交
-
-
由 Krzysztof Halasa 提交于
There is no point in using separate net_device_stats structs when the one in struct net_device is present. Compiles. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 PJ Waskiewicz 提交于
Update the NAPI implementation to use the new napi_struct infrstructure. This removes the need of multiple net_device structs to implement a multiqueue NAPI. Signed-off-by: NPJ Waskiewicz <peter.p.waskiewicz.jr.@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alexander Duyck 提交于
This patch resolves an issue seen on 82575 adapters with managability pass-thru enabled, which could cause the system to panic. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Auke Kok 提交于
Various cosmetic cleanups. Comment fixes. Eliminate the hw part out of the hw_dbg macro since it's always used. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alexander Duyck 提交于
Currently there are items in the driver to support parameters, but there are no parameters being added to the driver. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Function header comments do not match function name. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mitch Williams 提交于
Simplify a bunch of calls to these functions by moving the adapter struct out of the function arguments since that is not needed. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
EEPROM access beyond the base eeprom page is unsupported. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Make jumbo frame support configurable via ifconfig mtu option as suggested by Stephen Hemminger. Cc: Stephen Hemminger <stephen.hemminger@vyatta.com> Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Add a ->max_rxframe member to struct ipg_nic_private and convert the users of IPG_MAX_RXFRAME_SIZE to use it instead to enable per-device jumbo frame configuration. Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Add a ->max_rxframe member to struct ipg_nic_private and convert the users of IPG_RXSUPPORT_SIZE to use it instead to enable per-device jumbo frame configuration. Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Add a ->max_rxframe member to struct ipg_nic_private and convert the users of IPG_RXFRAG_SIZE to use it instead to enable per-device jumbo frame configuration. Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Remove JUMBO_FRAME #ifdef from dev->mtu setting in ipg_nic_open() so that we can make IPG_TXFRAG_SIZE configurable. Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Pekka Enberg 提交于
Add a ->is_jumbo boolean to struct ipg_nic_private and fix up ipg_interrupt_handler() to call the jumbo frame version of ipg_nic_rx() if the boolean is set to true. Also remove the JUMBO_FRAME #ifdefs so we can always compile in support for jumbo frames. Tested-by: NAndrew Savchenko <Bircoph@list.ru> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Merge branch 'r8169-next' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into upstream-next
-
- 03 7月, 2008 11 次提交
-
-
由 David S. Miller 提交于
Merge branch 'net-next-2.6-v6ready-20080703' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-next
-
由 YOSHIFUJI Hideaki 提交于
ip{,v6}_mroute_{set,get}sockopt() should not matter by optimization but it would be better not to depend on optimization semantically. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
Same as ip6_mr_init(), make ip_mr_init() return errno if fails. But do not do error handling in inet_init(), just print a msg. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
If do not do it, we will get following issues: 1. Leaving junks after inet6_init failing halfway. 2. Leaving proc and notifier junks after ipv6 modules unloading. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Outgoing interface is selected by the route decision if unspecified. Let's prefer routes via interface(s) with the address assigned if we have multiple routes with same cost. With help from Naohiro Ooiwa <nooiwa@miraclelinux.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
- If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.htmlSigned-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Handle interface property strictly when looking up a route for the loopback address (RFC4291 2.5.3). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
RFC4291 2.5.2. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Check the type of the address when adding a new one on interface. - the unspecified address (::) is always disallowed (RFC4291 2.5.2) - the loopback address is disallowed unless the interface is (one of) loopback (RFC4291 2.5.3). - multicast addresses are disallowed. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Pavel Emelyanov 提交于
There are some places in TCP that select one MIB index to bump snmp statistics like this: if (<something>) NET_INC_STATS_BH(<some_id>); else if (<something_else>) NET_INC_STATS_BH(<some_other_id>); ... else NET_INC_STATS_BH(<default_id>); or in a more tricky but still similar way. On the other hand, this NET_INC_STATS_BH is a camouflaged increment of percpu variable, which is not that small. Factoring those cases out de-bloats 235 bytes on non-preemptible i386 config and drives parts of the code into 80 columns. add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-235 (-235) function old new delta tcp_fastretrans_alert 1437 1424 -13 tcp_dsack_set 137 124 -13 tcp_xmit_retransmit_queue 690 676 -14 tcp_try_undo_recovery 283 265 -18 tcp_sacktag_write_queue 1550 1515 -35 tcp_update_reordering 162 106 -56 tcp_retransmit_timer 990 904 -86 Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2008 4 次提交
-
-
由 Santwona Behera 提交于
Implemented ethtool callback functions for configuring receive flow hashing in the niu driver. Signed-off-by: NSantwona Behera <santwona.behera@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santwona Behera 提交于
Added new interfaces to ethtool to configure receive network flow distribution across multiple rx rings using hashing. Signed-off-by: NSantwona Behera <santwona.behera@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Socket options SCTP_GET_PEER_ADDR_OLD, SCTP_GET_PEER_ADDR_NUM_OLD, SCTP_GET_LOCAL_ADDR_OLD, and SCTP_GET_PEER_LOCAL_ADDR_NUM_OLD have been replaced by newer versions a since 2005. It's time to officially deprecate them and schedule them for removal. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert the sysctl values for icmp ratelimit to use milliseconds instead of jiffies which is based on kernel configured HZ. Internal kernel jiffies are not a proper unit for any userspace API. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2008 4 次提交
-
-
由 Francois Romieu 提交于
It will almost unavoidably cause some breakage but it is long overdue. The driver identification string has been updated, a lost tabulation and some unused code have been removed. Otherwise the code paths should stay the same. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
-
由 Francois Romieu 提交于
The layout of the 8168 serie is different from that of the 8110 one. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
-
由 David S. Miller 提交于
-
由 David S. Miller 提交于
-
- 28 6月, 2008 6 次提交
-
-
由 Jeff Garzik 提交于
synchronize_irq() is superfluous when free_irq() call immediately follows it, because free_irq() also does a synchronize_irq() call of its own. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Clean up config/burst value arch-specific setup. * bcrvalue only varied by its big-endian bit * crvalue only varied for certain types of x86-32 chips This should make fealnx quite a bit more portable, without any behavior change. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Harvey Harrison 提交于
DE_UNALIGNED_16 is always being passed a u16 *, no need to have the wrapper with two casts in it, just call get_unaligned directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tobias Diedrich 提交于
This patch is the minimal amount of code needed to support wake-on-lan in platform mode properly (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed) for me. This is derived from David Brownells patch (http://lists.laptop.org/pipermail/devel/2007-April/004691.html). However I decided to move the hook into pci-acpi.c since the other two pci hooks also live there and pci and acpi are the only users of the platform_enable_wakeup-hook. As a 'side-effect' this also makes wake on usb activity work for me and I had to disable usb wakeup (which is enabled by default) using the power/wakeup sysfs functionality ("echo disabled > ${sysfs_path_to_device}/power/wakeup"). (BTW I first thought the 'immediate reboot because of usb wake' effect is caused by the optical mouse generating a wake event, but it rather seems to be a problem with a flaky secondary usb host controller, which sees a connected device where nothing is attached) Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tobias Diedrich 提交于
We currently don't signal the kernel we that this device can wake the system. Call device_init_wakeup() to correct this. Without this device_can_wakeup and device_may_wakeup will return incorrect values. Together with the minimized acpi wakeup patch (6/4 ;)), which will follow in the next mail, this really makes wake-on-lan work for me as expected (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed). Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Márton Németh 提交于
Clean up the following errors and warnings reported by checkpatch.pl: + ERROR: Macros with complex values should be enclosed in parenthesis + WARNING: __func__ should be used instead of gcc specific __FUNCTION__ + WARNING: plain inline is preferred over __inline__ + WARNING: Use #include <linux/io.h> instead of <asm/io.h> + WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> The changes were verified with by comparing the "objdump -d 8139too.ko" output which is exactly the same for the old and new version in case of config CONFIG_8139TOO=m, CONFIG_8139TOO_PIO=n, CONFIG_8139TOO_TUNE_TWISTER=n, CONFIG_8139TOO_8129=n, CONFIG_8139_OLD_RX_RESET=n. Software versions used: gcc 4.2.3, objdump 2.18.0.20080103, on elf32-i386. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-