Other than the defconfigs, remove the entry in compiler-gcc4.h,
Kconfig.debug and feature-removal-schedule.txt.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use a common irq_return entry point for all the iret places, which
need the paravirt INTERRUPT return wrapper.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Document randomize_va_space and CONFIG_COMPAT_BRK.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add function definition and extern variables to asm-x86/acpi.h.

All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are
only added to the x86 include headers.  boot.c already includes acpi.h
so no changes are needed there.

Fixes the following:
arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static?
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/topology.c:56:2: warning: returning void-valued expression
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Adjust the definition of lookup_address to take an unsigned long
level argument.  Adjust callers in xen/mmu.c that pass in a
dummy variable.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/cpu/mcheck/therm_throt.c:121:2: warning: returning void-valued expression
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use xen_khz to denote xen_specific clock speed.  Avoid shadowing
cpu_khz.

arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one
include/asm/tsc.h:17:21: originally declared here
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NArnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Each AMD Geode MFGPT timer interrupt output is paired with another
timer; esentially the interrupt goes if either timer fires.  This
is okay, but the handlers need to be aware of this.  Make sure in
the timer tick handler that our timer really did expire.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We *really* don't want to be reading MFGPTx_SETUP and writing back those
values.  What we want to be doing is clearing CMP1 and CMP2 unconditionally;
otherwise, we have races where CMP1 and/or CMP2 fire after we've read
MFGPTx_SETUP.  They can also fire between when we've written ~CNTEN to
the register, and when the new register values get copied to the timer's
version of the register.  By clearing both fields, we're okay.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

There isn't much value to always detecting the MFGPT timers on
Geode platforms; detection is only needed when something wants
to use the timers.  Move the detection code so that it gets
called the first time a timer is allocated.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We need to be called from elsewhere, and this gets some #ifdefs out
of the .c file.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit.  This
looks more understandable to me.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We had planned to use the 'owner' field for allowing re-allocation of
MFGPTs; however, doing it by module owner name isn't flexible enough.  So,
drop this for now.  If it turns out that we need timers in modules, we'll
need to come up with a scheme that matches the write-once fields of the
MFGPTx_SETUP register, and drops ponies from the sky.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards
run on a 32.768 kHz digital watch crystal. In practise, it will not
change the timer's frequency as the skew was only 2.4%, but it
should provide more accurate intervals.
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

- uninline timer functions; the compiler knows better than we do
  whether or not to inline these.
- mfgpt_start_timer() had an unused 'clock' argument, drop it.

From both Jordan and myself.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dynamic page tables.
  [S390] Add four level page tables for CONFIG_64BIT=y.
  [S390] 1K/2K page table pages.
  [S390] Remove a.out header file.
  [S390] sclp_vt220: Fix vt220 initialization
  [S390] qdio: avoid hang when establishing qdio queues
  [S390] VMEM_MAX_PHYS overflow on 31 bit.
  [S390] zcrypt: Do not start ap poll thread per default
  [S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly.
  [S390] Wire up new timerfd syscalls.
  [S390] Update default configuration.

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
  ide: introduce HAVE_IDE
  kbuild: silence CHK/UPD messages according to $(quiet)
  scsi: fix makefile for aic7(3*x)
  kbuild/modpost: Use warn() for announcing section mismatches
  Add binoffset to gitignore
  kbuild/modpost: improve warnings if symbol is unknown

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Merge branches 'release' and 'buildfix' into release
  acer-wmi - Add documentation
  sonypi - Move sonypi.txt to Documentation/laptops
  sony-laptop - Move sony-laptop.txt to Documentation/laptops
  thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptops
  Documentation - Create laptops sub-directory
  ACPI: thermal: buildfix for CONFIG_THERMAL=n
  cpuidle: build fix for non-x86
  acer-wmi: Fix backlight on AMW0 (V1) laptops
  tc1100-wmi: Mark as experimental
  ACPI: SBS: Host controller must initialize before SBS.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: extend ricoh_mmc to support Ricoh RL5c476
  at91_mci: use generic GPIO calls
  sdhci: add num index for multi controllers case
  MAINTAINERS: remove non-existant URLs
  mmc: remove sdhci and mmc_spi experimental markers
  mmc: Handle suspend/resume in Ricoh MMC disabler

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] cs553x_nand: command line partitioning support

Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards.  Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.

[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: NAlex Dubov <oakad@yahoo.com>
Signed-off-by: NMiguel Boton <mboton@gmail.co>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  CC      init/main.o
In file included from include2/asm/uaccess.h:8,
                 from include/linux/poll.h:13,
                 from include/linux/rtc.h:113,
                 from include/linux/efi.h:19,
                 from linux-2.6/init/main.c:43:
include/linux/mm.h:1151:
error: expected declaration specifiers or '...' before 'pgtable_t'
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reported-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pte_fn_t in include/linux/mm.h make it necessary for all architectures
to define a pgtable_t type, even those that do not have an mmu.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Cc: "Oliver Pinter" <oliver.pntr@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 - remove non-standard in/out markers
 - use tabs for formatting
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm_cgroup() is exclusively used to test whether an mm's mem_cgroup pointer
is pointing to a specific cgroup.  Instead of returning the pointer, we can
just do the test itself in a new macro:

	vm_match_cgroup(mm, cgroup)

returns non-zero if the mm's mem_cgroup points to cgroup.  Otherwise it
returns zero.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c: In function 'hostfs_show_options':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c:328: error: dereferencing pointer to incomplete type

We need to include mount.h to get vfsmount.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Reported-by: NAdrian Bunk <bunk@stusta.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  CC      mm/vmscan.o
In file included from
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/vmscan.c:44:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h: In function 'is_swap_pte':
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_none'
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_present'

Does it ever make sense to ask "is this pte a swap entry?" on a machine
with no MMU?  Presumably this also means it has no ptes too, right?  In
which case, it's better to comment the whole function out.  Then when
someone tries to ask the above meaningless question, they get a compile
error rather than a meaningless answer.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Reported-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for different number of page table levels dependent
on the highest address used for a process. This will cause a 31 bit
process to use a two level page table instead of the four level page
table that is the default after the pud has been introduced. Likewise
a normal 64 bit process will use three levels instead of four. Only
if a process runs out of the 4 tera bytes which can be addressed with
a three level page table the fourth level is dynamically added. Then
the process can use up to 8 peta byte.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch implements 1K/2K page table pages for s390.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

There are two problems in the vt220 intialization:

o Currently the vt220 console looses early printk events until the
  the vt220 tty is registered.
o console should work if tty_register fails

sclp_vt220_con_init calls __sclp_vt220_init and register_console.
It does not register the driver with the sclp core code via
sclp_register. That results in an sclp_send_mask=0. Therefore,
__sclp_vt220_emit will reject buffers with EIO. Unfortunately
register_console will cause the printk buffer to be sent to the
console and, therefore, every early message gets dropped. The
sclp_send_mask is set later during boot, when sclp_vt220_tty_init
calls sclp_register.

The solution is to move the sclp_register call from sclp_vt220_tty_init
to __sclp_vt220_init. This makes sure that the console is properly
registered with the sclp subsystem before the first log buffer messages
are passed to the vt220 console.

We also adopt the cleanup on error to keep the console alive if
tty_register fails.

Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas
for improvement.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If qdio establish runs in parallel with a channel error,
ccw_device_start_timeout may not trigger the qdio_timeout_handler.
In this case neither QDIO_IRQ_STATE_ESTABLISHED nor
QDIO_IRQ_STATE_ERR is reached and the following wait_event hangs
forever.
Solution: do not make use of the timeout option with
ccw_device_start, but add a timeout to the following wait_event.
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

With the new space saving spinlock_t and a non-debug configuration
the struct page only has 32 bytes for 31 bit s390. The causes an
overflow in the calculation of VMEM_MAX_PHYS which renders the
kernel unbootable.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Do not start ap poll thread per default to increase perfomance with
z/VM.
Signed-off-by: NFelix Beck <felix.beck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The black art of inline assemblies.. The new __ffs_word_loop/
__ffz_word_loop inline assemblies need an early clobber for the
two input/output variables.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>