- 24 10月, 2018 8 次提交
-
-
由 Steve French 提交于
Be able to log a ftrace message on success and/or failure of sending a lease break response to the server. Example output: TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | kworker/1:1-5681 [001] .... 11123.530457: smb3_lease_done: sid=0x291e3e0f tid=0x8ba43071 lease_key=0x1852ca0d3ecd9b55847750a86716fde lease_state=0x0 Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com>
-
由 Ronnie Sahlberg 提交于
Get rid of smb2_open_op_close() as all operations are now migrated to smb2_compound_op(). Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
We never pass is_falloc==true here anyway and if we ever need to support is_falloc in the future, SMB2_set_eof is such a trivial wrapper around send_set_info() that we can/should just create a differently named wrapper for that new functionality. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Cuts number of network roundtrips significantly for some common syscalls Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
This and previous patches drop the number of roundtrips we need for rmdir() from 6 to 2. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
so that we can use these later for compounded set-info calls. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
This turns most open/query-info/close patterns in cifs.ko to become compounds. This changes stat from using 3 roundtrips to just a single one. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 YueHaibing 提交于
Use kmemdup rather than duplicating its implementation Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 12 9月, 2018 2 次提交
-
-
由 Dan Carpenter 提交于
The "le32_to_cpu(rsp->OutputOffset) + *plen" addition can overflow and wrap around to a smaller value which looks like it would lead to an information leak. Fixes: 4a72dafa ("SMB2 FSCTL and IOCTL worker function") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org>
-
由 Dan Carpenter 提交于
The problem is that "entryptr + next_offset" and "entryptr + len + size" can wrap. I ended up changing the type of "entryptr" because it makes the math easier when we don't have to do so much casting. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
-
- 03 9月, 2018 1 次提交
-
-
由 Steve French 提交于
Although servers will typically ignore unsupported features, we should advertise the support for directory leases (as Windows e.g. does) in the negotiate protocol capabilities we pass to the server, and should check for the server capability (CAP_DIRECTORY_LEASING) before sending a lease request for an open of a directory. This will prevent us from accidentally sending directory leases to SMB2.1 or SMB2 server for example. Signed-off-by: NSteve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
- 24 8月, 2018 1 次提交
-
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 11 8月, 2018 1 次提交
-
-
由 Steve French 提交于
mounting with the "snapshots=" mount parm allows a read-only view of a previous version of a file system (see MS-SMB2 and "timewarp" tokens, section 2.2.13.2.6) based on the timestamp passed in on the snapshots mount parm. Add processing to optionally send this create context. Example output: /mnt1 is mounted with "snapshots=..." and will see an earlier version of the directory, with three fewer files than /mnt2 the current version of the directory. root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# cat /proc/mounts | grep cifs //172.22.149.186/public /mnt1 cifs ro,relatime,vers=default,cache=strict,username=smfrench,uid=0,noforceuid,gid=0,noforcegid,addr=172.22.149.186,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=1048576,wsize=1048576,echo_interval=60,snapshot=131748608570000000,actimeo=1 //172.22.149.186/public /mnt2 cifs rw,relatime,vers=default,cache=strict,username=smfrench,uid=0,noforceuid,gid=0,noforcegid,addr=172.22.149.186,file_mode=0755,dir_mode=0755,soft,nounix,mapposix,rsize=1048576,wsize=1048576,echo_interval=60,actimeo=1 root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt1 EmptyDir newerdir root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt1/newerdir root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt2 EmptyDir file newerdir newestdir timestamp-trace.cap root@Ubuntu-17-Virtual-Machine:~/cifs-2.6# ls /mnt2/newerdir new-file-not-in-snapshot Snapshots are extremely useful for comparing previous versions of files or directories, and recovering from data corruptions or mistakes. Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
- 10 8月, 2018 1 次提交
-
-
由 Ronnie Sahlberg 提交于
Change smb2_queryfs() to use a Create/QueryInfo/Close compound request. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
- 09 8月, 2018 3 次提交
-
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.com>
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.com>
-
- 08 8月, 2018 6 次提交
-
-
由 Steve French 提交于
CONFIG_CIFS_STATS should always be enabled as Pavel recently noted. Simple statistics are not a significant performance hit, and removing the ifdef simplifies the code slightly. Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
由 Steve French 提交于
For SMB2/SMB3 the number of requests sent was not displayed in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was enabled (only number of failed requests displayed). As with earlier dialects, we should be displaying these counters if CONFIG_CIFS_STATS is enabled. They are important for debugging. e.g. when you cat /proc/fs/cifs/Stats (before the patch) Resources in use CIFS Session: 1 Share (unique mount targets): 2 SMB Request/Response Buffer: 1 Pool size: 5 SMB Small Req/Resp Buffer: 1 Pool size: 30 Operations (MIDs): 0 0 session 0 share reconnects Total vfs operations: 690 maximum at one time: 2 1) \\localhost\test SMBs: 975 Negotiates: 0 sent 0 failed SessionSetups: 0 sent 0 failed Logoffs: 0 sent 0 failed TreeConnects: 0 sent 0 failed TreeDisconnects: 0 sent 0 failed Creates: 0 sent 2 failed Closes: 0 sent 0 failed Flushes: 0 sent 0 failed Reads: 0 sent 0 failed Writes: 0 sent 0 failed Locks: 0 sent 0 failed IOCTLs: 0 sent 1 failed Cancels: 0 sent 0 failed Echos: 0 sent 0 failed QueryDirectories: 0 sent 63 failed Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
由 Steve French 提交于
We really, really want to be encouraging use of secure dialects, and SMB3.1.1 offers useful security features, and will soon be the recommended dialect for many use cases. Simplify the code by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable it in the build, and create compatibility and/or security issues with modern servers - many of which have been supporting this dialect for multiple years. Also clarify some of the Kconfig text for cifs.ko about SMB3.1.1 and current supported features in the module. Signed-off-by: NSteve French <stfrench@microsoft.com> Acked-by: NAurelien Aptel <aaptel@suse.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
由 Steve French 提交于
Output now matches expected stat -f output for all fields except for Namelen and ID which were addressed in a companion patch (which retrieves them from existing SMB3 mechanisms and works whether POSIX enabled or not) Signed-off-by: NSteve French <smfrench@gmail.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com>
-
由 Steve French 提交于
Fil in the correct namelen (typically 255 not 4096) in the statfs response and also fill in a reasonably unique fsid (in this case taken from the volume id, and the creation time of the volume). In the case of the POSIX statfs all fields are now filled in, and in the case of non-POSIX mounts, all fields are filled in which can be. Signed-off-by: NSteve French <stfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: NAurelien Aptel <aaptel@suse.com>
-
由 Aurelien Aptel 提交于
also fixes error code in smb311_posix_mkdir() (where the error assignment needs to go before the goto) a typo that Dan Carpenter and Paulo and Gustavo pointed out. Signed-off-by: NAurelien Aptel <aaptel@suse.com> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.de> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 06 7月, 2018 3 次提交
-
-
由 Stefano Brivio 提交于
smb{2,3}_create_lease_buf() store a lease key in the lease context for later usage on a lease break. In most paths, the key is currently sourced from data that happens to be on the stack near local variables for oplock in SMB2_open() callers, e.g. from open_shroot(), whereas smb2_open_file() properly allocates space on its stack for it. The address of those local variables holding the oplock is then passed to create_lease_buf handlers via SMB2_open(), and 16 bytes near oplock are used. This causes a stack out-of-bounds access as reported by KASAN on SMB2.1 and SMB3 mounts (first out-of-bounds access is shown here): [ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985 [ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91 [ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 111.536838] Call Trace: [ 111.537528] dump_stack+0xc2/0x16b [ 111.540890] print_address_description+0x6a/0x270 [ 111.542185] kasan_report+0x258/0x380 [ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs] [ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs] [ 111.575883] open_shroot+0x339/0x550 [cifs] [ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs] [ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs] [ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs] [ 111.677915] mount_fs+0x55/0x2b0 [ 111.679504] vfs_kern_mount.part.22+0xaa/0x430 [ 111.684511] do_mount+0xc40/0x2660 [ 111.698301] ksys_mount+0x80/0xd0 [ 111.701541] do_syscall_64+0x14e/0x4b0 [ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 111.713665] RIP: 0033:0x7f372385b5fa [ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48 [ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa [ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f [ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000 [ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000 [ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000 [ 111.735448] The buggy address belongs to the page: [ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 111.739890] flags: 0x17ffffc0000000() [ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000 [ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 111.746679] page dumped because: kasan: bad access detected [ 111.750482] Memory state around the buggy address: [ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00 [ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2 [ 111.759801] ^ [ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 [ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 111.766913] ================================================================== Lease keys are however already generated and stored in fid data on open and create paths: pass them down to the lease context creation handlers and use them. Suggested-by: NAurélien Aptel <aaptel@suse.com> Reviewed-by: NAurelien Aptel <aaptel@suse.com> Fixes: b8c32dbb ("CIFS: Request SMB2.1 leases") Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Paulo Alcantara 提交于
For every request we send, whether it is SMB1 or SMB2+, we attempt to reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying out the request. So, while server->tcpStatus != CifsNeedReconnect, we wait for the reconnection to succeed on wait_event_interruptible_timeout(). If it returns, that means that either the condition was evaluated to true, or timeout elapsed, or it was interrupted by a signal. Since we're not handling the case where the process woke up due to a received signal (-ERESTARTSYS), the next call to wait_event_interruptible_timeout() will _always_ fail and we end up looping forever inside either cifs_reconnect_tcon() or smb2_reconnect(). Here's an example of how to trigger that: $ mount.cifs //foo/share /mnt/test -o username=foo,password=foo,vers=1.0,hard (break connection to server before executing bellow cmd) $ stat -f /mnt/test & sleep 140 [1] 2511 $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f /mnt/test $ kill -9 2511 (wait for a while; process is stuck in the kernel) $ ps -aux -q 2511 USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f /mnt/test By using 'hard' mount point means that cifs.ko will keep retrying indefinitely, however we must allow the process to be killed otherwise it would hang the system. Signed-off-by: NPaulo Alcantara <palcantara@suse.de> Cc: stable@vger.kernel.org Reviewed-by: NAurelien Aptel <aaptel@suse.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Stefano Brivio 提交于
A "small" CIFS buffer is not big enough in general to hold a setacl request for SMB2, and we end up overflowing the buffer in send_set_info(). For instance: # mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl # touch /mnt/test/acltest # getcifsacl /mnt/test/acltest REVISION:0x1 CONTROL:0x9004 OWNER:S-1-5-21-2926364953-924364008-418108241-1000 GROUP:S-1-22-2-1001 ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-22-2-1001:ALLOWED/0x0/R ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff ACL:S-1-1-0:ALLOWED/0x0/R # setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest this setacl will cause the following KASAN splat: [ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs] [ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012 [ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2 [ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 330.784395] Call Trace: [ 330.784789] dump_stack+0xc2/0x16b [ 330.786777] print_address_description+0x6a/0x270 [ 330.787520] kasan_report+0x258/0x380 [ 330.788845] memcpy+0x34/0x50 [ 330.789369] send_set_info+0x4dd/0xc20 [cifs] [ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.840367] __vfs_setxattr+0x84/0xb0 [ 330.842060] __vfs_setxattr_noperm+0xe6/0x370 [ 330.843848] vfs_setxattr+0xc2/0xd0 [ 330.845519] setxattr+0x258/0x320 [ 330.859211] path_setxattr+0x15b/0x1b0 [ 330.864392] __x64_sys_setxattr+0xc0/0x160 [ 330.866133] do_syscall_64+0x14e/0x4b0 [ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.878503] RIP: 0033:0x7ff2e507db0a [ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48 [ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc [ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a [ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818 [ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4 [ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007 [ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550 [ 330.901057] Allocated by task 1012: [ 330.902888] kasan_kmalloc+0xa0/0xd0 [ 330.904714] kmem_cache_alloc+0xc8/0x1d0 [ 330.906615] mempool_alloc+0x11e/0x380 [ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs] [ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs] [ 330.912551] send_set_info+0x198/0xc20 [cifs] [ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs] [ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs] [ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs] [ 330.920426] __vfs_setxattr+0x84/0xb0 [ 330.922284] __vfs_setxattr_noperm+0xe6/0x370 [ 330.924213] vfs_setxattr+0xc2/0xd0 [ 330.926008] setxattr+0x258/0x320 [ 330.927762] path_setxattr+0x15b/0x1b0 [ 330.929592] __x64_sys_setxattr+0xc0/0x160 [ 330.931459] do_syscall_64+0x14e/0x4b0 [ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 330.936843] Freed by task 0: [ 330.938588] (stack is not available) [ 330.941886] The buggy address belongs to the object at ffff88010d5e2800 which belongs to the cache cifs_small_rq of size 448 [ 330.946362] The buggy address is located 96 bytes inside of 448-byte region [ffff88010d5e2800, ffff88010d5e29c0) [ 330.950722] The buggy address belongs to the page: [ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0 [ 330.955665] flags: 0x17ffffc0008100(slab|head) [ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80 [ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 [ 330.963005] page dumped because: kasan: bad access detected [ 330.967039] Memory state around the buggy address: [ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc [ 330.976956] ^ [ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 330.984225] ================================================================== Fix this by allocating a regular CIFS buffer in smb2_plain_req_init() if the request command is SMB2_SET_INFO. Reported-by: NJianhong Yin <jiyin@redhat.com> Fixes: 366ed846 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function") CC: Stable <stable@vger.kernel.org> Signed-off-by: NStefano Brivio <sbrivio@redhat.com> Reviewed-and-tested-by: NAurelien Aptel <aaptel@suse.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 15 6月, 2018 4 次提交
-
-
由 Steve French 提交于
mkdir was not passing the mode on smb3.11 mounts with posix extensions Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Now that we have the plumbing to pass request without an rfc1002 header all the way down to the point we write to the socket we no longer need the smb2_send_recv() function. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Ronnie Sahlberg 提交于
Move the generation of the 4 byte length field down the stack and generate it immediately before we start writing the data to the socket. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NAurelien Aptel <aaptel@suse.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Steve French 提交于
Compared to other clients the Linux smb3 client ramps up credits very slowly, taking more than 128 operations before a maximum size write could be sent (since the number of credits requested is only 2 per small operation, causing the credit limit to grow very slowly). This lack of credits initially would impact large i/o performance, when large i/o is tried early before enough credits are built up. Signed-off-by: NSteve French <stfrench@gmail.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
- 13 6月, 2018 1 次提交
-
-
由 Kees Cook 提交于
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 08 6月, 2018 1 次提交
-
-
由 Ronnie Sahlberg 提交于
This leak was introduced in 91cb74f5 and caused us to leak one small buffer for every symlink query. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 06 6月, 2018 1 次提交
-
-
由 Long Li 提交于
Change code to pass the correct page offset during memory registration for RDMA read/write. Signed-off-by: NLong Li <longli@microsoft.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 05 6月, 2018 1 次提交
-
-
由 Shirish Pargaonkar 提交于
cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class Validate_buf () function checks for an expected minimum sized response passed to query_info() function. For security information, the size of a security descriptor can be smaller (one subauthority, no ACEs) than the size of the structure that defines FileInfoClass of FileAllInformation. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199725 Cc: <stable@vger.kernel.org> Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com> Reviewed-by: NNoah Morrison <noah.morrison@rubrik.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 03 6月, 2018 1 次提交
-
-
由 Long Li 提交于
With offset defined in rdata, transport functions need to look at this offset when reading data into the correct places in pages. Signed-off-by: NLong Li <longli@microsoft.com> Signed-off-by: NSteve French <smfrench@gmail.com>
-
- 01 6月, 2018 5 次提交
-
-
由 Ronnie Sahlberg 提交于
Since header_preamble_size is 0 for SMB2+ we can remove it in those code paths that are only invoked from SMB2. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
struct smb2_hdr is now just a wrapper for smb2_sync_hdr. We can thus get rid of smb2_hdr completely and access the sync header directly. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
The two structures smb2_oplock_breaq_req/rsp are now basically identical. Replace this with a single definition of a smb2_oplock_break structure. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Separate out all the 4 byte rfc1002 headers so that they are no longer part of the SMB2 header structures to prepare for future work to add compounding support. Update the smb3 transform header processing that we no longer have a rfc1002 header at the start of this structure. Update smb2_readv_callback to accommodate that the first iovector in the response is no the smb2 header and no longer a rfc1002 header. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-