- 21 5月, 2012 9 次提交
-
-
由 Marek Szyprowski 提交于
This patch removes dma bounce hooks from the common dma mapping implementation on ARM architecture and creates a separate set of dma_map_ops for dma bounce devices. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
This patch converts all dma_sg methods to be generic (independent of the current DMA mapping implementation for ARM architecture). All dma sg operations are now implemented on top of respective dma_map_page/dma_sync_single_for* operations from dma_map_ops structure. Before this patch there were custom methods for all scatter/gather related operations. They iterated over the whole scatter list and called cache related operations directly (which in turn checked if we use dma bounce code or not and called respective version). This patch changes them not to use such shortcut. Instead it provides similar loop over scatter list and calls methods from the device's dma_map_ops structure. This enables us to use device dependent implementations of cache related operations (direct linear or dma bounce) depending on the provided dma_map_ops structure. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
This patch modifies dma-mapping implementation on ARM architecture to use common dma_map_ops structure and asm-generic/dma-mapping-common.h helpers. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
This patch removes the need for the offset parameter in dma bounce functions. This is required to let dma-mapping framework on ARM architecture to use common, generic dma_map_ops based dma-mapping helpers. Background and more detailed explaination: dma_*_range_* functions are available from the early days of the dma mapping api. They are the correct way of doing a partial syncs on the buffer (usually used by the network device drivers). This patch changes only the internal implementation of the dma bounce functions to let them tunnel through dma_map_ops structure. The driver api stays unchanged, so driver are obliged to call dma_*_range_* functions to keep code clean and easy to understand. The only drawback from this patch is reduced detection of the dma api abuse. Let us consider the following code: dma_addr = dma_map_single(dev, ptr, 64, DMA_TO_DEVICE); dma_sync_single_range_for_cpu(dev, dma_addr+16, 0, 32, DMA_TO_DEVICE); Without the patch such code fails, because dma bounce code is unable to find the bounce buffer for the given dma_address. After the patch the above sync call will be equivalent to: dma_sync_single_range_for_cpu(dev, dma_addr, 16, 32, DMA_TO_DEVICE); which succeeds. I don't consider this as a real problem, because DMA API abuse should be caught by debug_dma_* function family. This patch lets us to simplify the internal low-level implementation without chaning the driver visible API. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
Replace all uses of ~0 with DMA_ERROR_CODE, what should make the code easier to read. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
Replace all calls to printk with pr_* functions family. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Marek Szyprowski 提交于
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 Marek Szyprowski 提交于
Add a common helper for dma-mapping core for mapping a coherent buffer to userspace. Reported-by: NSubash Patel <subashrp@gmail.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Tested-By: NSubash Patel <subash.ramaswamy@linaro.org>
-
由 Linus Torvalds 提交于
-
- 20 5月, 2012 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PA-RISC fixes from James Bottomley: "This is a set of three bug fixes that gets parisc running again on systems with PA1.1 processors. Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug that only affects PA7300LC processors. We also have another pending fix to do with the sectional arrangement of vmlinux.lds, but there's a query on it during testing on one particular system type, so I'll hold off sending it in for now." * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix panic on prefetch(NULL) on PA7300LC [PARISC] fix crash in flush_icache_page_asm on PA1.1 [PARISC] fix PA1.1 oops on boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 linker bug workarounds from Peter Anvin. GNU ld-2.22.52.0.[12] (*) has an unfortunate bug where it incorrectly turns certain relocation entries absolute. Section-relative symbols that are part of otherwise empty sections are silently changed them to absolute. We rely on section-relative symbols staying section-relative, and actually have several sections in the linker script solely for this purpose. See for example http://sourceware.org/bugzilla/show_bug.cgi?id=14052 We could just black-list the buggy linker, but it appears that it got shipped in at least F17, and possibly other distros too, so it's sadly not some rare unusual case. This backports the workaround from the x86/trampoline branch, and as Peter says: "This is not a minimal fix, not at all, but it is a tested code base." * 'x86/ld-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, relocs: When printing an error, say relative or absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug x86, realmode: 16-bit real-mode code support for relocs tool (*) That's a manly release numbering system. Stupid, sure. But manly.
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block layer fixes from Jens Axboe: "A few small, but important fixes. Most of them are marked for stable as well - Fix failure to release a semaphore on error path in mtip32xx. - Fix crashable condition in bio_get_nr_vecs(). - Don't mark end-of-disk buffers as mapped, limit it to i_size. - Fix for build problem with CONFIG_BLOCK=n on arm at least. - Fix for a buffer overlow on UUID partition printing. - Trivial removal of unused variables in dac960." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix buffer overflow when printing partition UUIDs Fix blkdev.h build errors when BLOCK=n bio allocation failure due to bio_get_nr_vecs() block: don't mark buffers beyond end of disk as mapped mtip32xx: release the semaphore on an error path dac960: Remove unused variables from DAC960_CreateProcEntries()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull one more networking bug-fix from David Miller: "One last straggler. Eric Dumazet's pktgen unload oops fix was not entirely complete, but all the cases should be handled properly now.... fingers crossed." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: pktgen: fix module unload for good
-
由 Hugh Dickins 提交于
Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows a flurry of hundreds of warnings at kernel/res_counter.c:96, where res_counter_uncharge_locked() does WARN_ON(counter->usage < val). The first trace of each flurry implicates __mem_cgroup_cancel_charge() of mc.precharge, and an audit of mc.precharge handling points to mem_cgroup_move_charge_pte_range()'s THP handling in commit 12724850 ("memcg: avoid THP split in task migration"). Checking !mc.precharge is good everywhere else, when a single page is to be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to follow, is liable to result in underflow (a lot can change since the precharge was estimated). Simply check against HPAGE_PMD_NR: there's probably a better alternative, trying precharge for more, splitting if unsuccessful; but this one-liner is safer for now - no kernel/res_counter.c:96 warnings seen in 26 hours. Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 5月, 2012 13 次提交
-
-
由 H. Peter Anvin 提交于
When the relocs tool throws an error, let the error message say if it is an absolute or relative symbol. This should make it a lot more clear what action the programmer needs to take and should help us find the reason if additional symbol bugs show up. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: <stable@vger.kernel.org>
-
由 H. Peter Anvin 提交于
GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from section-relative to absolute if they are in a section of zero length. This turns the symbols __init_begin and __init_end into absolute symbols. Let the relocs program know that those should be treated as relative symbols. Reported-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: <stable@vger.kernel.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
-
由 H. Peter Anvin 提交于
A new option is added to the relocs tool called '--realmode'. This option causes the generation of 16-bit segment relocations and 32-bit linear relocations for the real-mode code. When the real-mode code is moved to the low-memory during kernel initialization, these relocation entries can be used to relocate the code properly. In the assembly code 16-bit segment relocations must be relative to the 'real_mode_seg' absolute symbol. Linear relocations must be relative to a symbol prefixed with 'pa_'. 16-bit segment relocation is used to load cs:ip in 16-bit code. Linear relocations are used in the 32-bit code for relocatable data references. They are declared in the linker script of the real-mode code. The relocs tool is moved to arch/x86/tools/relocs.c, and added new target archscripts that can be used to build scripts needed building an architecture. be compiled before building the arch/x86 tree. [ hpa: accelerating this because it detects invalid absolute relocations, a serious bug in binutils 2.22.52.0.x which currently produces bad kernels. ] Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.comSigned-off-by: NJarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm由 Linus Torvalds 提交于
Pull a dm fix from Alasdair G Kergon: "A fix to the thin provisioning userspace interface." * tag 'dm-3.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: fix table output when pool target disables discard passdown internally
-
由 Mike Snitzer 提交于
When the thin pool target clears the discard_passdown parameter internally, it incorrectly changes the table line reported to userspace. This breaks dumb string comparisons on these table lines in generic userspace device-mapper library code and leads to tables being reloaded repeatedly when nothing is actually meant to be changing. This patch corrects this by no longer changing the table line when discard passdown was disabled. We can still tell when discard passdown is overridden by looking for the message "Discard unsupported by data device (sdX): Disabling discard passdown." This automatic detection is also moved from the 'load' to the 'resume' so that it is re-evaluated should the properties of underlying devices change. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull one more md bugfix from NeilBrown: "Fix bug in recent fix to RAID10. Without this patch, recovery will crash" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/raid10: fix transcription error in calc_sectors conversion.
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull tile tree bugfix from Chris Metcalf: "This fixes a security vulnerability (and correctness bug) in tilegx" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilegx: enable SYSCALL_WRAPPERS support
-
由 NeilBrown 提交于
The old code was sector_div(stride, fc); the new code was sector_dir(size, conf->near_copies); 'size' is right (the stride various wasn't really needed), but 'fc' means 'far_copies', and that is an important difference. Signed-off-by: NeilBrown <neilb@suse.de>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton. * emailed from Andrew Morton <akpm@linux-foundation.org>: (4 patches) frv: delete incorrect task prototypes causing compile fail slub: missing test for partial pages flush work in flush_all() fs, proc: fix ABBA deadlock in case of execution attempt of map_files/ entries drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01
-
由 Linus Torvalds 提交于
Instead of doing the i_mode calculations at proc_fd_instantiate() time, move them into tid_fd_revalidate(), which is where the other inode state (notably uid/gid information) is updated too. Otherwise we'll end up with stale i_mode information if an fd is re-used while the dentry still hangs around. Not that anything really *cares* (symlink permissions don't really matter), but Tetsuo Handa noticed that the owner read/write bits don't always match the state of the readability of the file descriptor, and we _used_ to get this right a long time ago in a galaxy far, far away. Besides, aside from fixing an ugly detail (that has apparently been this way since commit 61a28784: "proc: Remove the hard coded inode numbers" in 2006), this removes more lines of code than it adds. And it just makes sense to update i_mode in the same place we update i_uid/gid. Al Viro correctly points out that we could just do the inode fill in the inode iops ->getattr() function instead. However, that does require somewhat slightly more invasive changes, and adds yet *another* lookup of the file descriptor. We need to do the revalidate() for other reasons anyway, and have the file descriptor handy, so we might as well fill in the information at this point. Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NEric Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
commit c57b5468 (pktgen: fix crash at module unload) did a very poor job with list primitives. 1) list_splice() arguments were in the wrong order 2) list_splice(list, head) has undefined behavior if head is not initialized. 3) We should use the list_splice_init() variant to clear pktgen_threads list. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Some discussion with the glibc mailing lists revealed that this was necessary for 64-bit platforms with MIPS-like sign-extension rules for 32-bit values. The original symptom was that passing (uid_t)-1 to setreuid() was failing in programs linked -pthread because of the "setxid" mechanism for passing setxid-type function arguments to the syscall code. SYSCALL_WRAPPERS handles ensuring that all syscall arguments end up with proper sign-extension and is thus the appropriate fix for this problem. On other platforms (s390, powerpc, sparc64, and mips) this was fixed in 2.6.28.6. The general issue is tracked as CVE-2009-0029. Cc: <stable@vger.kernel.org> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras由 Linus Torvalds 提交于
Pull a machine check recovery fix from Tony Luck. I really don't like how the MCE code does some of the things it does, but this does seem to be an improvement. * tag 'linus-mce-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: x86/mce: Only restart instruction after machine check recovery if it is safe
-
- 18 5月, 2012 13 次提交
-
-
由 Paul Gortmaker 提交于
Commit 41101809 ("fork: Provide weak arch_release_[task_struct| thread_info] functions") in -tip highlights a problem in the frv arch, where it has needles prototypes for alloc_task_struct_node and free_task_struct. This now shows up as: kernel/fork.c:120:66: error: static declaration of 'alloc_task_struct_node' follows non-static declaration kernel/fork.c:127:51: error: static declaration of 'free_task_struct' follows non-static declaration since that commit turned them into real functions. Since arch/frv does does not define define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (i.e. it just uses the generic ones) it shouldn't list these at all. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Cc: David Howells <dhowells@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 majianpeng 提交于
I found some kernel messages such as: SLUB raid5-md127: kmem_cache_destroy called for cache that still has objects. Pid: 6143, comm: mdadm Tainted: G O 3.4.0-rc6+ #75 Call Trace: kmem_cache_destroy+0x328/0x400 free_conf+0x2d/0xf0 [raid456] stop+0x41/0x60 [raid456] md_stop+0x1a/0x60 [md_mod] do_md_stop+0x74/0x470 [md_mod] md_ioctl+0xff/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b Then using kmemleak I found these messages: unreferenced object 0xffff8800b6db7380 (size 112): comm "mdadm", pid 5783, jiffies 4294810749 (age 90.589s) hex dump (first 32 bytes): 01 01 db b6 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... ff ff ff ff ff ff ff ff 98 40 4a 82 ff ff ff ff .........@J..... backtrace: kmemleak_alloc+0x21/0x50 kmem_cache_alloc+0xeb/0x1b0 kmem_cache_open+0x2f1/0x430 kmem_cache_create+0x158/0x320 setup_conf+0x649/0x770 [raid456] run+0x68b/0x840 [raid456] md_run+0x529/0x940 [md_mod] do_md_run+0x18/0xc0 [md_mod] md_ioctl+0xba8/0x11f0 [md_mod] blkdev_ioctl+0xd8/0x7a0 block_ioctl+0x3b/0x40 do_vfs_ioctl+0x96/0x560 sys_ioctl+0x91/0xa0 system_call_fastpath+0x16/0x1b This bug was introduced by commit a8364d55 ("slub: only IPI CPUs that have per cpu obj to flush"), which did not include checks for per cpu partial pages being present on a cpu. Signed-off-by: Nmajianpeng <majianpeng@gmail.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
map_files/ entries are never supposed to be executed, still curious minds might try to run them, which leads to the following deadlock ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc4-24406-g841e6a6 #121 Not tainted ------------------------------------------------------- bash/1556 is trying to acquire lock: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: do_lookup+0x267/0x2b1 but task is already holding lock: (&sig->cred_guard_mutex){+.+.+.}, at: prepare_bprm_creds+0x2d/0x69 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sig->cred_guard_mutex){+.+.+.}: validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_killable_nested+0x40/0x45 lock_trace+0x24/0x59 proc_map_files_lookup+0x5a/0x165 __lookup_hash+0x52/0x73 do_lookup+0x276/0x2b1 walk_component+0x3d/0x114 do_last+0xfc/0x540 path_openat+0xd3/0x306 do_filp_open+0x3d/0x89 do_sys_open+0x74/0x106 sys_open+0x21/0x23 tracesys+0xdd/0xe2 -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}: check_prev_add+0x6a/0x1ef validate_chain+0x444/0x4f4 __lock_acquire+0x387/0x3f8 lock_acquire+0x12b/0x158 __mutex_lock_common+0x56/0x3a9 mutex_lock_nested+0x40/0x45 do_lookup+0x267/0x2b1 walk_component+0x3d/0x114 link_path_walk+0x1f9/0x48f path_openat+0xb6/0x306 do_filp_open+0x3d/0x89 open_exec+0x25/0xa0 do_execve_common+0xea/0x2f9 do_execve+0x43/0x45 sys_execve+0x43/0x5a stub_execve+0x6c/0xc0 This is because prepare_bprm_creds grabs task->signal->cred_guard_mutex and when do_lookup happens we try to grab task->signal->cred_guard_mutex again in lock_trace. Fix it using plain ptrace_may_access() helper in proc_map_files_lookup() and in proc_map_files_readdir() instead of lock_trace(), the caller must be CAP_SYS_ADMIN granted anyway. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Reported-by: NSasha Levin <levinsasha928@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Jones <davej@redhat.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rajkumar Kasirajan 提交于
The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: NRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Small set of fixes again." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path ARM: 7418/1: LPAE: fix access flag setup in mem_type_table ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull two networking fixes from David S. Miller: 1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's been present in do_tcp_sendpages() since that function was written in 2002. When we block to wait for memory we have to unconditionally try and push out pending TCP data, otherwise we can block for an unreasonably long amount of time. 2) Fix deadlock in e1000, fixes kernel bugzilla 43132 From Tushar Dave. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: e1000: Prevent reset task killing itself. tcp: do_tcp_sendpages() must try to push data out on oom conditions
-
由 Rafael J. Wysocki 提交于
Commit 1cc0c998 ("ACPI: Fix D3hot v D3cold confusion") introduced a bug in __acpi_bus_set_power() and changed the behavior of acpi_pci_set_power_state() in such a way that it generally doesn't work as expected if PCI_D3hot is passed to it as the second argument. First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to __acpi_bus_set_power() and the explicit_set flag is set for the D3cold state, the function will try to execute AML method called "_PS4", which doesn't exist. Fix this by adding a check to ensure that the name of the AML method to execute for transitions to ACPI_STATE_D3_COLD is correct in __acpi_bus_set_power(). Also make sure that the explicit_set flag for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify acpi_power_transition() to avoid accessing power resources for ACPI_STATE_D3_COLD, because they don't exist. Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the target state, the function will request a transition to ACPI_STATE_D3_HOT instead of ACPI_STATE_D3. However, ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML method is defined for the given device, which is rare. This causes problems to happen on systems where devices were successfully put into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work now. In particular, some unused graphics adapters are not turned off as a result. To fix this issue restore the old behavior of acpi_pci_set_power_state(), which is to request a transition to ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or PCI_D3cold is passed to it as the argument. This approach is not ideal, because generally power should not be removed from devices if PCI_D3hot is the target power state, but since this behavior is relied on, we have no choice but to restore it at the moment and spend more time on designing a better solution in the future. References: https://bugzilla.kernel.org/show_bug.cgi?id=43228Reported-by: Nrocko <rockorequin@hotmail.com> Reported-by: NCristian Rodríguez <crrodriguez@opensuse.org> Reported-and-tested-by: NPeter <lekensteyn@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tushar Dave 提交于
Killing reset task while adapter is resetting causes deadlock. Only kill reset task if adapter is not resetting. Ref bug #43132 on bugzilla.kernel.org CC: stable@vger.kernel.org Signed-off-by: NTushar Dave <tushar.n.dave@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willy Tarreau 提交于
Since recent changes on TCP splicing (starting with commits 2f533844 "tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp: tcp_sendpages() should call tcp_push() once"), I started seeing massive stalls when forwarding traffic between two sockets using splice() when pipe buffers were larger than socket buffers. Latest changes (net: netdev_alloc_skb() use build_skb()) made the problem even more apparent. The reason seems to be that if do_tcp_sendpages() fails on out of memory condition without being able to send at least one byte, tcp_push() is not called and the buffers cannot be flushed. After applying the attached patch, I cannot reproduce the stalls at all and the data rate it perfectly stable and steady under any condition which previously caused the problem to be permanent. The issue seems to have been there since before the kernel migrated to git, which makes me think that the stalls I occasionally experienced with tux during stress-tests years ago were probably related to the same issue. This issue was first encountered on 3.0.31 and 3.2.17, so please backport to -stable. Signed-off-by: NWilly Tarreau <w@1wt.eu> Acked-by: NEric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull two more target-core updates from Nicholas Bellinger: "The first patch addresses a SPC-2 reservations RELEASE bug in a special (iscsi specific) multi-ISID setup case that was allowing the same initiator to be able to incorrect release it's own reservation on a different SCSI path with enforce_pr_isid=1 operation. This bug was caught by Bernhard Kohl. The second patch is to address a bug with FILEIO backends where the incorrect number of blocks for READ_CAPACITY was being reported after an underlying device-mapper block_device size change. This patch uses now i_size_read() in fd_get_blocks() for FILEIO backends with an underlying block_device, instead of trying to determine this value at setup time during fd_create_virtdevice(). (hch CC'ed) Both are CC'ed to stable." * '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix bug in handling of FILEIO + block_device resize ops target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
-
由 Nicholas Bellinger 提交于
This patch fixes a bug in the handling of FILEIO w/ underlying block_device resize operations where the original fd_dev->fd_dev_size was incorrectly being used in fd_get_blocks() for READ_CAPACITY response payloads. This patch avoids using fd_dev->fd_dev_size for FILEIO devices with an underlying block_device, and instead changes fd_get_blocks() to get the sector count directly from i_size_read() as recommended by hch. Reported-by: NChristoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes fromVinod Koul: "fixes of cylic dma usages in slave dma drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fix cyclic dma usage dmaengine: pl330: dont complete descriptor for cyclic dma
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull last minute virtio fixes from Michael S. Tsirkin: "Here are a couple of last minute virtio fixes for 3.4. Hope it's not too late yes - I might have tried too hard to make sure the fix is well tested. Fixes are by Amit and myself. One fixes module removal and one suspend of a VM, the last one the handling of out of memory condition. They are thus very low risk as most people never hit these paths, but do fix very annoying problems for people that do use the feature. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_net: invoke softirqs after __napi_schedule virtio: balloon: let host know of updated balloon size before module removal virtio: console: tell host of open ports after resume from s3/s4
-