Starting with kernel 2.6.23-rc1, the i386 APM driver fails
on several of my machines with the message:

apm: BIOS not found

This happens because of a bug in the i386 boot code rewrite
from assembler to C. The original assembly code had the
following code in its APM BIOS presence test (boot/setup.S):

	andw	$0x02, %cx			# Is 32 bit supported?
	je	done_apm_bios			# No 32-bit, no (good) APM BIOS

That is, the code bails out if bit 2 is zero.

In the new C version, this is coded as (boot/apm.c):

	if (cx & 0x02)		/* 32 bits supported? */
		return -1;

Here we see that the test has been accidentally inverted.

The fix is to negate the test. I've verified that this
allows the APM driver to work again on my affected machines.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: null-terminate context string in selinux_xfrm_sec_ctx_alloc

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops

Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix types used for reset register address setup.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add configure support for the Intec Wildfire and WildFireMod boards.
Signed-Off-By: NSteve Bennett <steveb@workware.net.au>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is useless to preserve THREAD_SR in `resume'.  The real user's sr
is actually in the stack.  We also don't need to disable interrupts :
we'll never be in an invalid state, the sp switch is atomic.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Need an include/asm-m68knommu/hw_irq.h for kernel/hrtimer.c
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a small typo in the definition of MCFDMA_DIR_INV (MCF5272 specific).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add build support for the new Arcturus boards.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Need to explicitly include linux/device.h.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CLOCK_TICK_RATE should give the underlying frequency of the tick timer,
to make ntp happy.  For Coldfires, that's the main clock.
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add configure support for the Arcturus UC5272 and UC5282 boards.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix workqueues in 68328 serial driver.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the legacy power management code from the 68328 serial driver.
It is not used, and there is no current kernel support for power
management on the 68328.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: disable writeback for 0x0f 0x01 instructions.
  KVM: Fix removal of nx capability from guest cpuid
  Revert "KVM: Avoid useless memory write when possible"
  KVM: Fix unlikely kvm_create vs decache_vcpus_on_cpu race
  KVM: Correctly handle writes crossing a page boundary

This avoids xtime lag seen with dynticks, because while 'xtime' itself
is still not updated often, we keep a 'xtime_cache' variable around that
contains the approximate real-time that _is_ updated each time we do a
'update_wall_time()', and is thus never off by more than one tick.

IOW, this restores the original semantics for 'xtime' users, as long as
you use the proper abstraction functions (ie 'current_kernel_time()' or
'get_seconds()' depending on whether you want a timespec or just the
seconds field).

[ Updated Patch.  As penance for my sins I've also yanked another #ifdef
  that was added to avoid the xtime lag w/ hrtimers.  ]
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This avoids use of the kernel-internal "xtime" variable directly outside
of the actual time-related functions.  Instead, use the helper functions
that we already have available to us.

This doesn't actually change any behaviour, but this will allow us to
fix the fact that "xtime" isn't updated very often with CONFIG_NO_HZ
(because much of the realtime information is maintained as separate
offsets to 'xtime'), which has caused interfaces that use xtime directly
to get a time that is out of sync with the real-time clock by up to a
third of a second or so.
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

xfrm_audit_log() expects the context string to be null-terminated
which currently doesn't happen with user-supplied contexts.
Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

0x0f 0x01 instructions (ie lgdt, lidt, smsw, lmsw and invlpg) does
not use writeback. This patch set no_wb=1 when emulating those
instructions.

This fixes a regression booting the FreeBSD kernel on AMD.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Testing the wrong bit caused kvm not to disable nx on the guest when it is
disabled on the host (an mmu optimization relies on the nx bits being the
same in the guest and host).

This allows Windows to boot when nx is disabled on te host (e.g. when
host pae is disabled).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This reverts commit a3c870bd.  While it
does save useless updates, it (probably) defeats the fork detector, causing
a massive performance loss.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We add the kvm to the vm_list before initializing the vcpu mutexes,
which can be mutex_trylock()'ed by decache_vcpus_on_cpu().
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Writes that are contiguous in virtual memory may not be contiguous in
physical memory; so split writes that straddle a page boundary.

Thanks to Aurelien for reporting the bug, patient testing, and a fix
to this very patch.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Conflicts:

	drivers/acpi/sleep/main.c
Signed-off-by: NLen Brown <len.brown@intel.com>

As it was a synonym for (CONFIG_ACPI && CONFIG_X86),
the ifdefs for it were more clutter than they were worth.

For ia64, just add a few stubs in anticipation of future
S3 or S4 support.
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126]
ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126]

These methods are optional, so Linux should not
alarm users when they are not found.

http://bugzilla.kernel.org/show_bug.cgi?id=8802Signed-off-by: NLen Brown <len.brown@intel.com>
Acked-by: NLuming Yu <luming.yu@intel.com>

* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
  [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
  [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
  [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
  [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
  [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
  [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
  [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
  [POWERPC] FSL: Add support for PCI-X controllers
  [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
  [POWERPC] Provide ability to setup P2P bridge registers from struct resource
  [POWERPC] Add basic PCI/PCI Express support for 8544DS board
  [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
  [POWERPC] Removed setup_indirect_pci_nomap
  [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
  [POWERPC] 85xx: Added 8568 PCIe support
  [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
  [POWERPC] Add basic PCI node for mpc8568mds board
  [POWERPC] Use Freescale pci/pcie common code for 85xx boards
  [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
  [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
  ...

kunmap_atomic() takes the virtual address, not the mapped page as
argument.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix marge error due to conflict in arch/mips/kernel/head.S
  [MIPS] ARC: Remove unused arch/mips/arc/console.c
  [MIPS] SNI: sniprom
  [MIPS] Jazz: remove unneeded reset functions
  [MIPS] Whitespace cleanup.
  [MIPS] Make resources for ds1742 "static __initdata"
  [MIPS] Replace __attribute_used__ with __used
  [MIPS] Jazz: Remove unused arch/mips/jazz/io.c
  [MIPS] Mark prom_free_prom_memory as __init_refok
  [MIPS] MIPSsim: Fix cflags

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_hpt37x: Fix 2.6.22 clock PLL regression
  pata_ali: Correct HP detect
  ata_piix: fix suspend/resume for some TOSHIBA laptops
  PCI: export __pci_reenable_device()

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (26 commits)
  netdev: i82596 Ethernet needs <asm/cacheflush.h>
  forcedeth: mcp73 device addition
  forcedeth: new device ids in pci_ids.h
  atl1: make atl1_init_ring_ptrs static
  eHEA: net_poll support
  drivers/net/acenic.c: fix check-after-use
  defxx: Use __maybe_unused rather than a local hack
  Fix error checking in Vitesse IRQ config
  ps3: reduce allocation size of rx skb buffers
  atl1: use kernel provided ethernet length constants
  atl1: fix typo in dma_req_block
  atl1: change cmb write threshold
  atl1: fix typo in DMA engine setup
  atl1: change tpd_avail function name
  ps3: fix rare issue that reenabling rx DMA fails
  ps3: removed calling netif_poll_enable() in open()
  ps3: use ethX as the name of irq
  ps3: use net_device_stats of net_device structure
  ps3: removed conditional ethtool support
  ps3: removed defines no longer used
  ...

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Mark most of initial bootup asm as .text.init.ref_ok
  [SPARC32]: Fix bug in sparc optimized memset.
  [SPARC64]: Update defconfig.
  [SPARC]: Add missing NOTES section.
  [SPARC32]: missing exports
  [SPARC32]: Deal with rtc/sun_mostek_rtc conflict.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [8021Q]: vlan_ioctl_handler: fix return value
  [GENETLINK]: Correctly report errors while registering a multicast group
  [GENETLINK]: Fix adjustment of number of multicast groups
  [GENETLINK]: Fix race in genl_unregister_mc_groups()
  [NETFILTER]: Clean up duplicate includes in net/netfilter/
  [NETFILTER]: Clean up duplicate includes in net/bridge/
  [NETFILTER]: Fix logging regression
  [TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.

net/8021q/vlan.c: In function 'vlan_ioctl_handler':
net/8021q/vlan.c:700: warning: 'err' may be used uninitialized in this function

The warning is incorrect, but from my reading this ioctl will return -EINVAL
on success.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current calculation of the maximum number of genetlink
multicast groups seems odd, fix it.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

family->mcast_groups is protected by genl_lock so it must
be held while accessing the list in genl_unregister_mc_groups().
Requires adding a non-locking variant of genl_unregister_mc_group().
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>