- 15 10月, 2005 10 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Andreas Schwab spotted that recent kernels broke reporting of the PowerMac machine model in /proc/cpuinfo. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
This patch fixes the following BUG message of arch/m32r/smp.c for CONFIG_DEBUG_PREEMPT: BUG: using smp_processor_id() in preemptible This message is displayed by an smp_processor_id() execution during kernel's preemptible-state. Signed-off-by: NHitoshi Yamamoto <hitoshiy@isl.melco.co.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matteo Croce 提交于
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: NMatteo Croce <3297627799@wind.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tim Schmielau 提交于
Fix copy and paste error in jiffies_to_AHZ conversion which leads to wrong BSD accounting information on alpha and ia64 when CONFIG_BSD_PROCESS_ACCT_V3 is turned on. Also update comment to match reorganised header files. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Takashi Iwai 提交于
Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when CONFIG_TIME_INTERPOLATION isn't set. Needed by drivers/char/mmtimer.c Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes depenencies of collie keyboard. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes compilation with CPU_FREQ disabled. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoichi Yuasa 提交于
arch/mips/pci/fixup-tb0226.c: In function `pcibios_map_irq': arch/mips/pci/fixup-tb0226.c:31: warning: implicit declaration of function `vr41xx_set_irq_trigger' arch/mips/pci/fixup-tb0226.c:32: error: `TRIGGER_LEVEL' undeclared (first use in this function) arch/mips/pci/fixup-tb0226.c:32: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-tb0226.c:32: error: for each function it appears in.) arch/mips/pci/fixup-tb0226.c:33: error: `SIGNAL_THROUGH' undeclared (first use in this function) arch/mips/pci/fixup-tb0226.c:34: warning: implicit declaration of function `vr41xx_set_irq_level' arch/mips/pci/fixup-tb0226.c:34: error: `LEVEL_LOW' undeclared (first use in this function) Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 10月, 2005 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Herbert Xu 提交于
Better safe than sorry. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Evgeniy Polyakov 提交于
Updated documentation to reflect 2.6.14 netlink changes about socket options, multicasting and group number. Please concider for 2.6.14. Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andi Kleen 提交于
Opterons with frequency scaling have fully unsynchronized TSCs running at different frequencies, so using TSCs there is not a good idea. Also some other x86 boxes have this problem. gettimeofday should be good enough, so just disable it. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Original patch by Harald Welte, with feedback from Herbert Xu and testing by Sébastien Bernard. EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus are numbered linearly. That is not necessarily true. This patch fixes that up by calculating the largest possible cpu number, and allocating enough per-cpu structure space given that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
- 13 10月, 2005 21 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove an unused variable from s3c2410.c and ensure that items not needed to be exported from s3c2440.c are declared static. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks include/asm-arm/arch-s3c2410/hardware.h was missing the definition for s3c2440_set_dsc() Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Herbert Xu 提交于
This is the second report of this bug. Unfortunately the first reporter hasn't been able to reproduce it since to provide more debugging info. So let's apply this patch for 2.6.14 to 1) Make this non-fatal. 2) Provide the info we need to track it down. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Dooks 提交于
When netpoll is not being used, the macro that defines the removed routing netpoll_poll_lock defines the return as zero, but the real routine returns a `void *` Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This fixes the RCU race on bridge delete interface. Basically, the network device has to be detached from the bridge in the first step (pre-RCU), rather than later. At that point, no more bridge traffic will come in, and the other code will not think that network device is part of a bridge. This should also fix the XEN test problems. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The sequence to move over to the Linux trap tables from the firmware ones needs to be more air tight. It turns out that to be %100 safe we do need to be able to translate OBP mappings in our TLB miss handlers early. In order not to eat up a lot of kernel image memory with static page tables, just use the translations array in the OBP TLB miss handlers. That solves the bulk of the problem. Furthermore, to make sure the OBP TLB miss path will work even before the fixed MMU globals are loaded, explicitly load %g1 to TLB_SFSR at the beginning of the i-TLB and d-TLB miss handlers. To ease the OBP TLB miss walking of the prom_trans[] array, we sort it then delete all of the non-OBP entries in there (for example, there are entries for the kernel image itself which we're not interested in at all). We also save about 32K of kernel image size with this change. Not a bad side effect :-) There are still some reasons why trampoline.S can't use the setup_trap_table() yet. The most noteworthy are: 1) OBP boots secondary processors with non-bias'd stack for some reason. This is easily fixed by using a small bootup stack in the kernel image explicitly for this purpose. 2) Doing a firmware call via the normal C call prom_set_trap_table() goes through the whole OBP enter/exit sequence that saves and restores OBP and Linux kernel state in the MMUs. This path unfortunately does a "flush %g6" while loading up the OBP locked TLB entries for the firmware call. If we setup the %g6 in the trampoline.S code properly, that is in the PAGE_OFFSET linear mapping, but we're not on the kernel trap table yet so those addresses won't translate properly. One idea is to do a by-hand firmware call like we do in the early bootup code and elsewhere here in trampoline.S But this fails as well, as aparently the secondary processors are not booted with OBP's special locked TLB entries loaded. These are necessary for the firwmare to processes TLB misses correctly up until the point where we take over the trap table. This does need to be resolved at some point. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liam Girdwood 提交于
Patch from Liam Girdwood This patch updates the pxa2xx channel map registers definitions in pxa-regs.h Changes:- o Added description for SSP2 registers o Added definitions for SSP3 registers Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lothar Wassmann 提交于
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: NLothar Wassmann <LW@KARO-electronics.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The NWFPE is producing a number of errors from sparse due to not defining a number of functions in the header files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 George G. Davis 提交于
Patch from George G. Davis Fix leading, trailing and other miscellaneous whitespace issues in arch/arm/kernel/alignment.c. Signed-off-by: NGeorge G. Davis <gdavis@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 George G. Davis 提交于
Patch from George G. Davis When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather than -mtune=strongarm but fall back to the later in case someone is using an older toolchain (although they should really upgrade instead). Signed-off-by: NGeorge G. Davis <gdavis@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Patch from Sascha Hauer handle rts interrupt Signed-off-by: NGiancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The items in the export table do not need to be exported elsehwere, so quash the sparse warning by making the symbol for the table entry static. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks arch/arm/mach-s3c2410/time.c is missing include of cpu.h, causing the declaration of the timer struct (s3c24xx_timer) to be flagged as missing the declaration. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Either no one is using an ARM710 with recent kernels, or all ARM710s still in use are not afflicted by this swi bug. Nevertheless, the code to work around the ARM710 swi bug is itself currently buggy since it uses r8 as a pointer to S_PC while in fact it holds the spsr content these days. Fix that, and simplify the code as well. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 10月, 2005 3 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Glibc is about to get some new high precision timer stuff that relies on the standard timebase of the PPC architecture. However, some (rare & old) CPUs do not have such timebase and it is a bit annoying to have your stuff just crash because you are running on the wrong CPU... This exposes to userland a CPU feature bit that tells that the current processor doesn't have a standard timebase. It's negative logic so that glibc will still "just work" on older kernels (it will just be unhappy on those old CPUs but that doesn't really matter as distro tend to update glibc & kernel at the same time). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Interestingly enough, ppc32 had broken timekeeping for ages... It worked, but probably drifted a bit more than could be explained by the actual bad precision of the timebase calibration. We discovered that recently when somebody figured out that the common code was using CLOCK_TICK_RATE to correct the timekeeing, and ppc32 had a completely bogus value for it. This patch turns it into something saner. Probably not as good as doing something based on the actual timebase frequency precision but I'll leave that sort of math to others. This at least makes it better for the common HZ values. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Give an empty definition for clear_can_do_skas() when it is not needed. Thanks to Junichi Uekawa <dancer@netfort.gr.jp> for reporting the breakage and providing a fix (I re-fixed it in an IMHO cleaner way). Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-