- 06 12月, 2014 8 次提交
-
-
由 Emil Tantilov 提交于
The driver has logic to free up used data in case any of the checks in ixgbe_probe() fail, however there is a similar set of cleanups that can occur on driver unload in ixgbe_remove() which can cause the rmmod command to crash. This patch aims to fix the logic by moving pci_set_drvdata() after all error checks and then adds a check in ixgbe_remove() to skip it altogether if adapter comes up empty. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Since we now support X550 mac's bump the version number to reflect this. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
The new X550 family of MAC's will have a larger RSS hash (16 -> 64). It will also support individual VF to have their own independent RSS hash key. This patch will enable this functionality Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Accessing the CIAA/D register can block access to the PCI config space. This patch removes the read/write operations to the CIAA/D registers and makes use of standard kernel functions for accessing the PCI config space. In addition it moves ixgbevf_check_for_bad_vf() into the watchdog subtask which reduces the frequency of the checks. CC: Alex Williamson <alex.williamson@redhat.com> Reported-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Martin K Petersen 提交于
Attempt to look up the MAC address in Open Firmware on systems that support it. On SPARC resort to using the IDPROM if no OF address is found. Signed-off-by: NMartin K Petersen <martin.petersen@oracle.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the tail writes for the ixgbe descriptor queues. The current implementation had me confused as I wasn't sure if it was still making use of the surprise remove logic or not. It also adds the mmiowb which is needed on ia64, mips, and a couple other architectures in order to synchronize the MMIO writes with the Tx queue _xmit_lock spinlock. Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch cleans up the page reuse code getting it into a state where all the workarounds needed are in place as well as cleaning up a few minor oversights such as using __free_pages instead of put_page to drop a locally allocated page. It also cleans up how we clear the descriptor status bits. Previously they were zeroed as a part of clearing the hdr_addr. However the hdr_addr is a 64 bit field and 64 bit writes can be a bit more expensive on on 32 bit systems. Since we are no longer using the header split feature the upper 32 bits of the address no longer need to be cleared. As a result we can just clear the status bits and leave the length and VLAN fields as-is which should provide more information in debugging. Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 03 12月, 2014 2 次提交
-
-
由 Scott Feldman 提交于
To allow brport device to return current brport flags set on port. Add returned flags to nested IFLA_PROTINFO netlink msg built in dflt getlink. With this change, netlink msg returned for bridge_getlink contains the port's offloaded flag settings (the port's SELF settings). Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Do the work of parsing NDA_VLAN directly in rtnetlink code, pass simple u16 vid to drivers from there. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2014 2 次提交
-
-
由 Thomas Graf 提交于
ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2014 2 次提交
-
-
由 Daniel Borkmann 提交于
While working on a different issue, I noticed an annoying use after free bug on my machine when unloading the ixgbe driver: [ 8642.318797] ixgbe 0000:02:00.1: removed PHC on p2p2 [ 8642.742716] ixgbe 0000:02:00.1: complete [ 8642.743784] BUG: unable to handle kernel paging request at ffff8807d3740a90 [ 8642.744828] IP: [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [ 8642.745886] PGD 20c6067 PUD 81c1f6067 PMD 81c15a067 PTE 80000007d3740060 [ 8642.746956] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 8642.748039] Modules linked in: [...] [ 8642.752929] CPU: 1 PID: 1225 Comm: rmmod Not tainted 3.18.0-rc2+ #49 [ 8642.754203] Hardware name: Supermicro X10SLM-F/X10SLM-F, BIOS 1.1b 11/01/2013 [ 8642.755505] task: ffff8807e34d3fe0 ti: ffff8807b7204000 task.ti: ffff8807b7204000 [ 8642.756831] RIP: 0010:[<ffffffffa01c77dc>] [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [...] [ 8642.774335] Stack: [ 8642.775805] ffff8807ee824098 ffff8807ee824098 ffffffffa01f3000 ffff8807ee824000 [ 8642.777326] ffff8807b7207e18 ffffffff8137720f ffff8807ee824098 ffff8807ee824098 [ 8642.778848] ffffffffa01f3068 ffff8807ee8240f8 ffff8807b7207e38 ffffffff8144180f [ 8642.780365] Call Trace: [ 8642.781869] [<ffffffff8137720f>] pci_device_remove+0x3f/0xc0 [ 8642.783395] [<ffffffff8144180f>] __device_release_driver+0x7f/0xf0 [ 8642.784876] [<ffffffff814421f8>] driver_detach+0xb8/0xc0 [ 8642.786352] [<ffffffff814414a9>] bus_remove_driver+0x59/0xe0 [ 8642.787783] [<ffffffff814429d0>] driver_unregister+0x30/0x70 [ 8642.789202] [<ffffffff81375c65>] pci_unregister_driver+0x25/0xa0 [ 8642.790657] [<ffffffffa01eb38e>] ixgbe_exit_module+0x1c/0xc8e [ixgbe] [ 8642.792064] [<ffffffff810f93a2>] SyS_delete_module+0x132/0x1c0 [ 8642.793450] [<ffffffff81012c61>] ? do_notify_resume+0x61/0xa0 [ 8642.794837] [<ffffffff816d2029>] system_call_fastpath+0x12/0x17 The issue is that test_and_set_bit() done on adapter->state is being performed *after* the netdevice has been freed via free_netdev(). When netdev is being allocated on initialization time, it allocates a private area, here struct ixgbe_adapter, that resides after the net_device structure. In ixgbe_probe(), the device init routine, we set up the adapter after alloc_etherdev_mq() on the private area and add a reference for the pci_dev as well via pci_set_drvdata(). Both in the error path of ixgbe_probe(), but also on module unload when ixgbe_remove() is being called, commit 41c62843 ("ixgbe: Fix rcu warnings induced by LER") accesses adapter after free_netdev(). The patch stores the result in a bool and thus fixes above oops on my side. Fixes: 41c62843 ("ixgbe: Fix rcu warnings induced by LER") Cc: stable <stable@vger.kernel.org> Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
IXGBE adapter seems to require that VLAN filtering be enabled if VMDQ or SRIOV are enabled. When those functions are disabled, VLAN filtering may be disabled in promiscuous mode. Prior to commit a9b8943e ("ixgbe: remove vlan_filter_disable and enable functions") The logic was correct. However, after the commit the logic got reversed and VLAN filtered in now turned on when VMDQ/SRIOV is disabled. This patch changes the condition to enable hw vlan filtered when VMDQ or SRIOV is enabled. Fixes: a9b8943e ("ixgbe: remove vlan_filter_disable and enable functions") Cc: stable <stable@vger.kernel.org> CC: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
The Intel drivers were pretty much just using the plain vanilla GFP flags in their calls to __skb_alloc_page so this change makes it so that they use dev_alloc_page which just uses GFP_ATOMIC for the gfp_flags value. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2014 2 次提交
-
-
由 Don Skidmore 提交于
Split off the setting of the RSS key into its own function. This will help when we add support for X550 which can have different RSS keys per pool. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch will add in the new MAC defines and fit it into the switch cases throughout the driver. New functionality and enablement support will be added in following patches. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 30 10月, 2014 1 次提交
-
-
由 Junwei Zhang 提交于
Signed-off-by: NMartin Zhang <martinbj2008@gmail.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 10月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2014 2 次提交
-
-
由 Emil Tantilov 提交于
This patch consolidates the logic behind dynamically setting TXDCTL.WTHRESH depending on interrupt throttle rate (ITR) setting regardless of BQL. Previously TXDCTL.WTHRESH was dynamically being set only with BQL being enabled, but we have to set it regardless of BQL when ITR is low to avoid Tx stalls/hangs. CC: John Greene <jogreene@redhat.com> Reported by: Masayuki Gouji <gouji.masayuki@jp.fujitsu.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Rick Jones 提交于
Convert the normal packet completion path to dev_consume_skb_any() so packet drop profiling via dropwatch or perf top -G -e skb_kfree_skb is not cluttered with false hits. Compile tested only. There is a dev_kfree_skb_any() in the routine ixgbe_ptp_tx_hwtstamp() in ixgbe_ptp.c that looks like a conversion candidate but I wasn't familiar enough with the code to pull the trigger. Signed-off-by: NRick Jones <rick.jones2@hp.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 18 9月, 2014 2 次提交
-
-
由 Mark Rustad 提交于
If a hardware Tx timestamp is requested, an uninitialized workqueue entry may be scheduled, especially on an 82598 adapter. Add a check for a PTP clock to avoid that. Also only apply the unlikely to the first term of the conditional. That will make the rest of the checks be in the cold path. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Acked-by: NMatthew Vick <matthew.vick@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ethan Zhao 提交于
Because bd_number is not useful anymore, so remove it from adapter struct, or if keep it, we have to fix the boards driven counter bug in ixgbe_remove() and ixgbe_probe() only for trivial debug purpose -- other output is enough. Signed-off-by: NEthan Zhao <ethan.zhao@oracle.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 9月, 2014 2 次提交
-
-
由 Alexander Duyck 提交于
This change removes the Rx buffer allocation at the end of ixgbe_clean_rx_irq. The reason for removing this is to avoid the extra latency introduced by the MMIO write. This can amount to somewhere around an extra 100ns of latency and one extra message worth of PCIe bus overhead. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
This patch resolves warnings produced by ixgbe in W=2 kernel builds. There are missing-field-initializers warnings and shadow warnings. None of these point to any deeper problem, so just resolve them so any new warnings get analyzed. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 9月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
Update ixgbe to drop the ixgbe_get_headlen function in favor of eth_get_headlen. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2014 3 次提交
-
-
由 Jacob Keller 提交于
Hardware has a limited number of pools available (64). Previously, no checks were in place to limit the number of accelerated macvlan devices based on the number of pools. Normally this would be ok, because there was already a limit for these well below the number of available pools. However, SR-IOV uses the very same pools. Therefor, we need to ensure that the total number of pools (number of VFs plus the number of non-VF pools in use for accelerated macvlans) does not exceed the number of pools available in hardware. This patch resolves a kernel NULL pointer dereference caused by the following commands: $modprobe ixgbe max_vfs=63 $ethtool -K eth2 l2-fwd-offload on $ip link add link eth2 macvlan0 type macvlan $ip link set dev macvlan0 up [ 992.950080] BUG: unable to handle kernel NULL pointer dereference at 0000000000000056 [ 992.951109] IP: [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.951684] PGD 22a80e067 PUD 232e9b067 PMD 0 [ 992.952389] Oops: 0000 [#1] SMP [ 992.953014] Modules linked in: nfsd lockd nfs_acl exportfs auth_rpcgss oid_registry sunrpc bridge stp llc vhost_net macvtap macvlan vhost tun kvm_intel kvm ioatdma ixgbe mdio igb dca [ 992.956042] CPU: 2 PID: 11928 Comm: ifconfig Not tainted 3.16.0-rc6-net-next-07-29-2014-FCoE+ #1 [ 992.956915] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 992.957791] task: ffff8804341c0000 ti: ffff8801d7dc8000 task.ti: ffff8801d7dc8000 [ 992.958660] RIP: 0010:[<ffffffffa003b71e>] [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.959613] RSP: 0018:ffff8801d7dcbbb8 EFLAGS: 00010286 [ 992.960093] RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000001 [ 992.960575] RDX: ffff880232eb7000 RSI: 0000000000000000 RDI: ffff88022dc05800 [ 992.961059] RBP: ffff8801d7dcbbd8 R08: 0000000000000000 R09: 0000000000000000 [ 992.961541] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88022ec20980 [ 992.962023] R13: ffff880232eb7000 R14: 0000000000000001 R15: 0000000000000001 [ 992.962508] FS: 00007fab264887a0(0000) GS:ffff880237640000(0000) knlGS:0000000000000000 [ 992.963378] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 992.963858] CR2: 0000000000000056 CR3: 000000022a939000 CR4: 00000000001427e0 [ 992.964340] Stack: [ 992.964806] ffff88022ec28840 ffff88022ec20980 ffff88022dc05800 ffff880232eb7000 [ 992.965976] ffff8801d7dcbc28 ffffffffa003bae8 ffff8801d7dcbbe8 0000000000000400 [ 992.967147] 000000000000000d ffff88022ec20980 ffff88022ec20000 ffff88022dc05800 [ 992.968319] Call Trace: [ 992.968795] [<ffffffffa003bae8>] ixgbe_fwd_ring_up+0x88/0x280 [ixgbe] [ 992.969284] [<ffffffffa0041d83>] ixgbe_fwd_add+0x173/0x220 [ixgbe] [ 992.969767] [<ffffffffa015056c>] macvlan_open+0x1bc/0x230 [macvlan] [ 992.970256] [<ffffffff816b8de7>] __dev_open+0xd7/0x150 [ 992.970735] [<ffffffff816b8bd7>] __dev_change_flags+0xa7/0x170 [ 992.971220] [<ffffffff816b8ccb>] dev_change_flags+0x2b/0x70 [ 992.971703] [<ffffffff817471b2>] devinet_ioctl+0x602/0x6d0 [ 992.972184] [<ffffffff81748168>] inet_ioctl+0x78/0x90 [ 992.972666] [<ffffffff816a143b>] sock_do_ioctl+0x2b/0x70 [ 992.973146] [<ffffffff816a14ed>] sock_ioctl+0x6d/0x260 [ 992.973627] [<ffffffff811ad3b4>] do_vfs_ioctl+0x84/0x540 [ 992.974109] [<ffffffff811a4c81>] ? final_putname+0x21/0x50 [ 992.974593] [<ffffffff818725d5>] ? sysret_check+0x22/0x5d [ 992.975073] [<ffffffff811ad901>] SyS_ioctl+0x91/0xa0 [ 992.975550] [<ffffffff818725a9>] system_call_fastpath+0x16/0x1b [ 992.976026] Code: ff 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 20 48 89 5d e8 4c 89 65 f0 48 89 f3 4c 89 6d f8 4c 8b a7 08 02 00 00 <44> 0f b6 6e 56 44 03 af 14 02 00 00 4c 89 e7 e8 5e f2 ff ff be [ 992.982261] RIP [<ffffffffa003b71e>] ixgbe_disable_fwd_ring+0x1e/0xf0 [ixgbe] [ 992.983212] RSP <ffff8801d7dcbbb8> [ 992.983681] CR2: 0000000000000056 [ 992.984248] ---[ end trace 9f54802b5cc3638b ]--- Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
ixgbe initiates a reset of the interface on link loss with pending Tx work in order to clear the rings. This patch extends the pending Tx work check to the VF interfaces with the same purpose. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that the behavior for FDB handling is consistent between both the SR-IOV and non-SR-IOV cases. The main change here is that we perform bounds checking on the number of SR-IOV addresses regardless of if SR-IOV is enabled or not as we can only support a certain number of addresses in the hardware. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 28 8月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
When xmit_more mode is being used and the ring is about to become full or the stack has stopped the ring, enforce a tail pointer write to the hw. Otherwise, we could risk a TX hang. Code suggested by Alexander Duyck. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
This implements the deferred tail pointer flush API for the ixgbe driver. Similar version also proposed longer time ago by Alexander Duyck. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 26 7月, 2014 1 次提交
-
-
由 Mark Rustad 提交于
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 7月, 2014 4 次提交
-
-
由 Jacob Keller 提交于
This patch prevents the display of the minimum link qualification check if we might be in a virtual machine. This check is incorrect and misleading in this case, since we actually don't really know what the available bandwidth is. To do so, we simply check whether each function on the bus matches our device id. If it doesn't the most likely scenario is that we're directly assigned to a virtual machine. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Fix a bug in the misuse of the list_for_each macro to loop over every entry in the bus_list. Instead of attempting to loop over the list from a random entry point, go up to the bus and use the real list_head entry point. This prevents the possible read or write of unallocated or incorrectly addressed memory. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
Change some uses of strncpy to use the more appropriate strlcpy when clearing is not needed to prevent information leakage. Also change some length arguments to use the preferred sizeof form. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mark Rustad 提交于
In ixgbe_probe, the code at label err_dma can dereference adapter when it has a NULL value. The check is there to avoid disabling a disabled device. When adapter is NULL, treat it as if the device is enabled, because it is enabled in that case. Signed-off-by: NMark Rustad <mark.d.rustad@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 04 6月, 2014 1 次提交
-
-
由 Emil Tantilov 提交于
In cases where the driver is loaded while there are no SFP+ modules in the cage the interface was not being detected as SFP capable. To account for this the driver called identify_sfp in ixgbe_get_settings to make sure the data is correct. However when there is no SFP+ module in the cage the driver waits for the I2C reads to time out which can take more than a second and will cause issues with tools (like net-snmp) that may poll for that information. This patch resolves the issue by identifying interfaces with no PHY type set as SFP capable which allows the driver to detect the SFP module when the interface is brought up. As result of this we can also remove the identify_sfp call from ixgbe_get_settings. v2: remove the 82599 specific check since we have 82598 devices that are SFP capable. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 27 5月, 2014 1 次提交
-
-
由 Jacob Keller 提交于
Resume path calls .open but suspend path cannot call .stop because fdirs should not be freed and control over hardware should not be released until WoL is configured. To avoid having to duplicate all changes made in .stop on suspend path split out part of .stop that is relevant during suspend and call it from .stop and during suspend. This fix also ensures that ixgbe_ptp_suspend is called during the suspend path, and helps avoid similar errors. We can't call ixgbe_ptp_stop, since it will free the PTP clock device, which we shouldn't be doing during a suspend path. Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-