- 19 6月, 2020 2 次提交
-
-
由 Atish Patra 提交于
As per walk_page_range documentation, mmap lock should be acquired by the caller before invoking walk_page_range. mmap_assert_locked gets triggered without that. The details can be found here. http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html Fixes: 395a21ff(riscv: add ARCH_HAS_SET_DIRECT_MAP support) Signed-off-by: NAtish Patra <atish.patra@wdc.com> Reviewed-by: NMichel Lespinasse <walken@google.com> Reviewed-by: NZong Li <zong.li@sifive.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
由 Yash Shah 提交于
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the RISC-V instruction set manual[0], the PTE permission bit combination of "write+exec only" is reserved for future use. Hence, don't allow such mapping request in mmap call. An issue is been reported by David Abdurachmanov, that while running stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V specific kernel. This issue arises when the stress-sysbadaddr request for pages with "write+exec only" permission bits and then passes the address obtain from this mmap call to various system call. For the riscv kernel, the mmap call should fail for this particular combination of permission bits since it's not valid. [0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdfSigned-off-by: NYash Shah <yash.shah@sifive.com> Reported-by: NDavid Abdurachmanov <david.abdurachmanov@gmail.com> [Palmer: Refer to the latest ISA specification at the only link I could find, and update the terminology.] Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
- 13 6月, 2020 1 次提交
-
-
由 Nathan Huckleberry 提交于
The argument passed to cmpxchg is not guaranteed to be sign extended, but lr.w sign extends on RV64I. This makes cmpxchg fail on clang built kernels when __old is negative. To fix this, we just cast __old to long which sign extends on RV64I. With this fix, clang built RISC-V kernels now boot. Link: https://github.com/ClangBuiltLinux/linux/issues/867Signed-off-by: NNathan Huckleberry <nhuck@google.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
- 12 6月, 2020 30 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux由 Linus Torvalds 提交于
Pull more RISC-V updates from Palmer Dabbelt: - Kconfig select statements are now sorted alphanumerically - first-level interrupts are now handled via a full irqchip driver - CPU hotplug is fixed - vDSO calls now use the common vDSO infrastructure * tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: set the permission of vdso_data to read-only riscv: use vDSO common flow to reduce the latency of the time-related functions riscv: fix build warning of missing prototypes RISC-V: Don't mark init section as non-executable RISC-V: Force select RISCV_INTC for CONFIG_RISCV RISC-V: Remove do_IRQ() function clocksource/drivers/timer-riscv: Use per-CPU timer interrupt irqchip: RISC-V per-HART local interrupt controller driver RISC-V: Rename and move plic_find_hart_id() to arch directory RISC-V: self-contained IPI handling routine RISC-V: Sort select statements alphanumerically
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "arm64 fixes that came in during the merge window. There will probably be more to come, but it doesn't seem like it's worth me sitting on these in the meantime. - Fix SCS debug check to report max stack usage in bytes as advertised - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS - Fix incorrect mask in HiSilicon L3C perf PMU driver - Fix compat vDSO compilation under some toolchain configurations - Fix false UBSAN warning from ACPI IORT parsing code - Fix booting under bootloaders that ignore TEXT_OFFSET - Annotate debug initcall function with '__init'" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: warn on incorrect placement of the kernel by the bootloader arm64: acpi: fix UBSAN warning arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO drivers/perf: hisi: Fix wrong value for all counters enable arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS arm64: debug: mark a function as __init to save some memory scs: Report SCS usage in bytes rather than number of entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu updates from Greg Ungerer: - casting clean up in the user access macros - memory leak on error case fix for PCI probing - update of a defconfig * tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm() m68k,nommu: add missing __user in uaccess' __ptr() macro m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfig m68k/PCI: Fix a memory leak in an error handling path
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar: "qcom: - new controller driver for IPCC - reorg the of_device data - add support for ipq6018 platform spreadtrum: - new sprd controller driver imx: - implement suspend/resume PM support misc: - make pcc driver struct static - fix return value in imx_mu_scu - disable clock before bailout in imx probe - remove duplicate error mssg in zynqmp probe - fix header size in imx.scu - check for null instead of is-err in zynqmp" * tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom: Add ipq6018 apcs compatible mailbox: qcom: Add clock driver name in apcs mailbox driver data dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag mailbox: imx: Add runtime PM callback to handle MU clocks mailbox: imx: Add context save/restore for suspend/resume MAINTAINERS: Add entry for Qualcomm IPCC driver mailbox: Add support for Qualcomm IPCC dt-bindings: mailbox: Add devicetree binding for Qcom IPCC mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe() mailbox: imx-mailbox: fix scu msg header size check mailbox: sprd: Add Spreadtrum mailbox driver dt-bindings: mailbox: Add the Spreadtrum mailbox documentation mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe() mailbox: imx: Disable the clock on devm_mbox_controller_register() failure mailbox: imx: Fix return in imx_mu_scu_xlate() mailbox: imx: Support runtime PM mailbox: pcc: make pcc_mbox_driver static
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are last-minute fixes gathered before merge window close; a few fixes are for the core while the rest majority are driver fixes. - PCM locking annotation fixes and the possible self-lock fix - ASoC DPCM regression fixes with multi-CPU DAI - A fix for inconsistent resume from system-PM on USB-audio - Improved runtime-PM handling with multiple USB interfaces - Quirks for HD-audio and USB-audio - Hardened firmware handling in max98390 codec - A couple of fixes for meson" * tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ASoC: rt5645: Add platform-data for Asus T101HA ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags ASoC: Intel: boards: replace capture_only by dpcm_capture ASoC: core: only convert non DPCM link to DPCM link ASoC: soc-pcm: dpcm: fix playback/capture checks ASoC: meson: add missing free_irq() in error path ALSA: pcm: disallow linking stream to itself ALSA: usb-audio: Manage auto-pm of all bundled interfaces ALSA: hda/realtek - add a pintbl quirk for several Lenovo machines ALSA: pcm: fix snd_pcm_link() lockdep splat ALSA: usb-audio: Use the new macro for HP Dock rename quirks ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock ALSA: emu10k1: delete an unnecessary condition dt-bindings: ASoc: Fix tdm-slot documentation spelling error ASoC: meson: fix memory leak of links if allocation of ldata fails ALSA: usb-audio: Fix inconsistent card PM state after resume ASoC: max98390: Fix potential crash during param fw loading ASoC: max98390: Fix incorrect printf qualifier ASoC: fsl-asoc-card: Defer probe when fail to find codec device ...
-
git://anongit.freedesktop.org/drm/drm由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "One sun4i fix and a connector hotplug race The ast fix is for a regression in 5.6, and one of the i915 ones fixes an oops reported by dhowells. core: - fix race in connectors sending hotplug i915: - Avoid use after free in cmdparser - Avoid NULL dereference when probing all display encoders - Fixup to module parameter type sun4i: - clock divider fix ast: - 24/32 bpp mode setting fix" * tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm: drm/ast: fix missing break in switch statement for format->cpp[0] case 4 drm/sun4i: hdmi ddc clk: Fix size of m divider drm/i915/display: Only query DP state of a DDI encoder drm/i915/params: fix i915.reset module param type drm/i915/gem: Mark the buffer pool as active for the cmdparser drm/connector: notify userspace on hotplug after register complete
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Anna Schumaker: "New features and improvements: - Sunrpc receive buffer sizes only change when establishing a GSS credentials - Add more sunrpc tracepoints - Improve on tracepoints to capture internal NFS I/O errors Other bugfixes and cleanups: - Move a dprintk() to after a call to nfs_alloc_fattr() - Fix off-by-one issues in rpc_ntop6 - Fix a few coccicheck warnings - Use the correct SPDX license identifiers - Fix rpc_call_done assignment for BIND_CONN_TO_SESSION - Replace zero-length array with flexible array - Remove duplicate headers - Set invalid blocks after NFSv4 writes to update space_used attribute - Fix direct WRITE throughput regression" * tag 'nfs-for-5.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits) NFS: Fix direct WRITE throughput regression SUNRPC: rpc_xprt lifetime events should record xprt->state xprtrdma: Make xprt_rdma_slot_table_entries static nfs: set invalid blocks after NFSv4 writes NFS: remove redundant initialization of variable result sunrpc: add missing newline when printing parameter 'auth_hashtable_size' by sysfs NFS: Add a tracepoint in nfs_set_pgio_error() NFS: Trace short NFS READs NFS: nfs_xdr_status should record the procedure name SUNRPC: Set SOFTCONN when destroying GSS contexts SUNRPC: rpc_call_null_helper() should set RPC_TASK_SOFT SUNRPC: rpc_call_null_helper() already sets RPC_TASK_NULLCREDS SUNRPC: trace RPC client lifetime events SUNRPC: Trace transport lifetime events SUNRPC: Split the xdr_buf event class SUNRPC: Add tracepoint to rpc_call_rpcerror() SUNRPC: Update the RPC_SHOW_SOCKET() macro SUNRPC: Update the rpc_show_task_flags() macro SUNRPC: Trace GSS context lifetimes SUNRPC: receive buffer size estimation values almost never change ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "A number of fixes to the omap and nitrox drivers" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium/nitrox - Fix 'nitrox_get_first_device()' when ndevlist is fully iterated crypto: omap-sham - add proper load balancing support for multicore crypto: omap-aes - prevent unregistering algorithms twice crypto: omap-sham - fix very small data size handling crypto: omap-sham - huge buffer access fixes crypto: omap-crypto - fix userspace copied buffer access crypto: omap-sham - force kernel driver usage for sha algos crypto: omap-aes - avoid spamming console with self tests
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull DAX updates part three from Darrick Wong: "Now that the xfs changes have landed, this third piece changes the FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded after the last program closes the file, if doing so would make a S_DAX change happen. The goal here is to make dax access mode switching quicker when possible. Summary: - Teach XFS to ask the VFS to drop an inode if the administrator changes the FS_XFLAG_DAX inode flag such that the S_DAX state would change. This can result in files changing access modes without requiring an unmount cycle" * tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs/xfs: Update xfs_ioctl_setattr_dax_invalidate() fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags() fs/xfs: Create function xfs_inode_should_enable_dax() fs/xfs: Make DAX mount option a tri-state fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS fs/xfs: Remove unnecessary initialization of i_rwsem
-
由 Chuck Lever 提交于
I measured a 50% throughput regression for large direct writes. The observed on-the-wire behavior is that the client sends every NFS WRITE twice: once as an UNSTABLE WRITE plus a COMMIT, and once as a FILE_SYNC WRITE. This is because the nfs_write_match_verf() check in nfs_direct_commit_complete() fails for every WRITE. Buffered writes use nfs_write_completion(), which sets req->wb_verf correctly. Direct writes use nfs_direct_write_completion(), which does not set req->wb_verf at all. This leaves req->wb_verf set to all zeroes for every direct WRITE, and thus nfs_direct_commit_completion() always sets NFS_ODIRECT_RESCHED_WRITES. This fix appears to restore nearly all of the lost performance. Fixes: 1f28476d ("NFS: Fix O_DIRECT commit verifier handling") Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Help troubleshoot the logic that uses these flags. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Zou Wei 提交于
Fix the following sparse warning: net/sunrpc/xprtrdma/transport.c:71:14: warning: symbol 'xprt_rdma_slot_table_entries' was not declared. Should it be static? Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NZou Wei <zou_wei@huawei.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Zheng Bin 提交于
Use the following command to test nfsv4(size of file1M is 1MB): mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt cp file1M /mnt du -h /mnt/file1M -->0 within 60s, then 1M When write is done(cp file1M /mnt), will call this: nfs_writeback_done nfs4_write_done nfs4_write_done_cb nfs_writeback_update_inode nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime nfs_post_op_update_inode_force_wcc_locked nfs_set_cache_invalid nfs_refresh_inode_locked nfs_update_inode nfsd write response contains change, ctime, mtime, the flag will be clear after nfs_update_inode. Howerver, write response does not contain space_used, previous open response contains space_used whose value is 0, so inode->i_blocks is still 0. nfs_getattr -->called by "du -h" do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s cache_validity = READ_ONCE(NFS_I(inode)->cache_validity) do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false if (do_update) { __nfs_revalidate_inode } Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M" is 0. Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done. Fixes: 16e14375 ("NFS: More fine grained attribute tracking") Signed-off-by: NZheng Bin <zhengbin13@huawei.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Colin Ian King 提交于
The variable result is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Xiongfeng Wang 提交于
When I cat parameter '/sys/module/sunrpc/parameters/auth_hashtable_size', it displays as follows. It is better to add a newline for easy reading. [root@hulk-202 ~]# cat /sys/module/sunrpc/parameters/auth_hashtable_size 16[root@hulk-202 ~]# Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
A short read can generate an -EIO error without there being an error on the wire. This tracepoint acts as an eyecatcher when there is no obvious I/O error. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
When sunrpc trace points are not enabled, the recorded task ID information alone is not helpful. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Move the RPC_TASK_SOFTCONN flag into rpc_call_null_helper(). The only minor behavior change is that it is now also set when destroying GSS contexts. This gives a better guarantee that gss_send_destroy_context() will not hang for long if a connection cannot be established. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up. All of rpc_call_null_helper() call sites assert RPC_TASK_SOFT, so move that setting into rpc_call_null_helper() itself. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up. Commit a52458b4 ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.") made rpc_call_null_helper() set RPC_TASK_NULLCREDS unconditionally. Therefore there's no need for rpc_call_null_helper()'s call sites to set RPC_TASK_NULLCREDS. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
The "create" tracepoint records parts of the rpc_create arguments, and the shutdown tracepoint records when the rpc_clnt is about to signal pending tasks and destroy auths. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Refactor: Hoist create/destroy/disconnect tracepoints out of xprtrdma and into the generic RPC client. Some benefits include: - Enable tracing of xprt lifetime events for the socket transport types - Expose the different types of disconnect to help run down issues with lingering connections Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
To help tie the recorded xdr_buf to a particular RPC transaction, the client side version of this class should display task ID information and the server side one should show the request's XID. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Add a tracepoint in another common exit point for failing RPCs. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Clean up: remove unnecessary commas, and fix a white-space nit. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Recent additions to the RPC_TASK flags neglected to update the tracepoint ENUM definitions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
由 Chuck Lever 提交于
Avoid unnecessary cache sloshing by placing the buffer size estimation update logic behind an atomic bit flag. The size of GSS information included in each wrapped Reply does not change during the lifetime of a GSS context. Therefore, the au_rslack and au_ralign fields need to be updated only once after establishing a fresh GSS credential. Thus a slack size update must occur after a cred is created, duplicated, renewed, or expires. I'm not sure I have this exactly right. A trace point is introduced to track updates to these variables to enable troubleshooting the problem if I missed a spot. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd updates from Bruce Fields: "Highlights: - Keep nfsd clients from unnecessarily breaking their own delegations. Note this requires a small kthreadd addition. The result is Tejun Heo's suggestion (see link), and he was OK with this going through my tree. - Patch nfsd/clients/ to display filenames, and to fix byte-order when displaying stateid's. - fix a module loading/unloading bug, from Neil Brown. - A big series from Chuck Lever with RPC/RDMA and tracing improvements, and lay some groundwork for RPC-over-TLS" Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com * tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits) sunrpc: use kmemdup_nul() in gssp_stringify() nfsd: safer handling of corrupted c_type nfsd4: make drc_slab global, not per-net SUNRPC: Remove unreachable error condition in rpcb_getport_async() nfsd: Fix svc_xprt refcnt leak when setup callback client failed sunrpc: clean up properly in gss_mech_unregister() sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations. sunrpc: check that domain table is empty at module unload. NFSD: Fix improperly-formatted Doxygen comments NFSD: Squash an annoying compiler warning SUNRPC: Clean up request deferral tracepoints NFSD: Add tracepoints for monitoring NFSD callbacks NFSD: Add tracepoints to the NFSD state management code NFSD: Add tracepoints to NFSD's duplicate reply cache SUNRPC: svc_show_status() macro should have enum definitions SUNRPC: Restructure svc_udp_recvfrom() SUNRPC: Refactor svc_recvfrom() SUNRPC: Clean up svc_release_skb() functions SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives SUNRPC: Replace dprintk() call sites in TCP receive path ...
-
- 11 6月, 2020 7 次提交
-
-
由 Ard Biesheuvel 提交于
Commit cfa7ede2 ("arm64: set TEXT_OFFSET to 0x0 in preparation for removing it entirely") results in boot failures when booting kernels that are built without KASLR support on broken bootloaders that ignore the TEXT_OFFSET value passed via the header, and use the default of 0x80000 instead. To work around this, turn CONFIG_RELOCATABLE on by default, even if KASLR itself (CONFIG_RANDOMIZE_BASE) is turned off, and require CONFIG_EXPERT to be enabled to deviate from this. Then, emit a warning into the kernel log if we are not booting via the EFI stub (which is permitted to deviate from the placement restrictions) and the kernel base address is not placed according to the rules as laid out in Documentation/arm64/booting.rst. Signed-off-by: NArd Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20200611124330.252163-1-ardb@kernel.orgSigned-off-by: NWill Deacon <will@kernel.org>
-
由 Dave Airlie 提交于
Merge tag 'drm-misc-next-fixes-2020-06-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next In core, DRM connectors now notify userspace of hotplug events via sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider; ast sets up 24/32-bit color mode correctly. Signed-off-by: NDave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200611075007.GA15098@linux-uq9g
-
由 Colin Ian King 提交于
Currently the switch statement for format->cpp[0] value 4 assigns color_index which is never read again and then falls through to the default case and returns. This looks like a missing break statement bug. Fix this by adding a break statement. Addresses-Coverity: ("Unused value") Fixes: 259d14a7 ("drm/ast: Split ast_set_vbios_mode_info()") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de> Tested-by: NThomas Zimmermann <tzimmermann@suse.de> Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200610115804.1132338-1-colin.king@canonical.com
-
由 Sivaprakash Murugesan 提交于
The Qualcomm ipq6018 has apcs block, add compatible for the same. Also, the ipq6018 apcs provides a clock functionality similar to msm8916 but the clock driver is different. Create a child device based on the apcs compatible for the clock controller functionality. Signed-off-by: NSivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Sivaprakash Murugesan 提交于
Some apcs mailbox devices supports a clock driver, the compatible strings of devices supporting clock driver along with the clock driver name are maintained in a separate structure within the mailbox driver. And the clock driver is added based on device match. With increase in number of devices supporting the clock feature move the clock driver name inside the driver data. so that we can use a single API to get the register offset of mailbox driver and clock driver name together, and the clock driver will be added based on the driver data. Signed-off-by: NSivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
-
由 Vincent Chen 提交于
The original vdso_data page is empty, so the permission of the vdso_data page can be the same with the vdso text page. After introducing the vDSO common flow, the vdso_data is not empty and the permission should be changed to read-only. Signed-off-by: NVincent Chen <vincent.chen@sifive.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
由 Vincent Chen 提交于
Even if RISC-V has supported the vDSO feature, the latency of the functions for obtaining the system time is still expensive. It is because these functions still trigger a corresponding system call in the process, which slows down the response time. If we want to remove the system call to reduce the latency, the kernel should have the ability to output the system clock information to userspace. This patch introduces the vDSO common flow to enable the kernel to achieve the above feature and uses "rdtime" instruction to obtain the current time in the user space. Under this condition, the latency cost by the ecall from U-mode to S-mode can be eliminated. After applying this patch, the latency of gettimeofday() measured on the HiFive unleashed board can be reduced by %61. Signed-off-by: NVincent Chen <vincent.chen@sifive.com> Reviewed-by: NAtish Patra <atish.patra@wdc.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-