- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 18 2月, 2013 2 次提交
-
-
由 Zheng Liu 提交于
This commit renames ext4_es_find_extent with ext4_es_find_delayed_extent and improve this function. First, we split input and output parameter. Second, this function never return the first block of the next delayed extent after 'es'. Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Jan kara <jack@suse.cz>
-
由 Zheng Liu 提交于
This commit refines the extent status tree code. 1) A prefix 'es_' is added to to the extent status tree structure members. 2) Refactored es_remove_extent() so that __es_remove_extent() can be used by es_insert_extent() to remove the old extent entry(-ies) before inserting a new one. 3) Rename extent_status_end() to ext4_es_end() 4) ext4_es_can_be_merged() is define to check whether two extents can be merged or not. 5) Update and clarified comments. Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz>
-
- 09 2月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 26 12月, 2012 1 次提交
-
-
由 Eric Sandeen 提交于
Although I put this in, I now think it was a bad decision. For most users, there is very little to be done in this case. They get the message, once per day, with no real context or proposed action. TBH, it generates support calls when it probably does not need to; the message sounds more dire than the situation really is. Just nuke it. Normal investigation via blktrace or whatnot can reveal poor IO patterns if bad performance is encountered. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 18 12月, 2012 1 次提交
-
-
由 Andrew Morton 提交于
But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 12月, 2012 1 次提交
-
-
由 Tao Ma 提交于
Ted has sent out a RFC about removing this feature. Eric and Jan confirmed that both RedHat and SUSE enable this feature in all their product. David also said that "As far as I know, it's enabled in all Android kernels that use ext4." So it seems OK for us. And what's more, as inline data depends its implementation on xattr, and to be frank, I don't run any test again inline data enabled while xattr disabled. So I think we should add inline data and remove this config option in the same release. [ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which isn't much in the grand scheme of things. Since no one seems to be testing this configuration except for some automated compile farms, on balance we are better removing this config option, and so that it is effectively always enabled. -- tytso ] Cc: David Brown <davidb@codeaurora.org> Cc: Eric Sandeen <sandeen@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NTao Ma <boyu.mt@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 09 11月, 2012 1 次提交
-
-
由 Zheng Liu 提交于
This patch makes ext4 really support SEEK_DATA/SEEK_HOLE flags. Block-mapped and extent-mapped files are fully implemented together because ext4_map_blocks hides this differences. After applying this patch, it will cause a failure in xfstest #285 when the file is block-mapped due to block-mapped file isn't support fallocate(2). I had tried to use ext4_ext_walk_space() to retrieve the offset for a extent-mapped file. But finally I decide to keep using ext4_map_blocks() to support SEEK_DATA/SEEK_HOLE because ext4_map_blocks() can hide the difference between block-mapped file and extent-mapped file. Moreover, in next step, extent status tree will track all extent status, and we can get all mappings from this tree. So I think that using ext4_map_blocks() is a better choice. CC: Hugh Dickins <hughd@google.com> Signed-off-by: NJie Liu <jeff.liu@oracle.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 09 10月, 2012 1 次提交
-
-
由 Konstantin Khlebnikov 提交于
Move actual pte filling for non-linear file mappings into the new special vma operation: ->remap_pages(). Filesystems must implement this method to get non-linear mapping support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 10月, 2012 1 次提交
-
-
由 Dmitry Monakhov 提交于
BUG #1) All places where we call ext4_flush_completed_IO are broken because buffered io and DIO/AIO goes through three stages 1) submitted io, 2) completed io (in i_completed_io_list) conversion pended 3) finished io (conversion done) And by calling ext4_flush_completed_IO we will flush only requests which were in (2) stage, which is wrong because: 1) punch_hole and truncate _must_ wait for all outstanding unwritten io regardless to it's state. 2) fsync and nolock_dio_read should also wait because there is a time window between end_page_writeback() and ext4_add_complete_io() As result integrity fsync is broken in case of buffered write to fallocated region: fsync blkdev_completion ->filemap_write_and_wait_range ->ext4_end_bio ->end_page_writeback <-- filemap_write_and_wait_range return ->ext4_flush_completed_IO sees empty i_completed_io_list but pended conversion still exist ->ext4_add_complete_io BUG #2) Race window becomes wider due to the 'ext4: completed_io locking cleanup V4' patch series This patch make following changes: 1) ext4_flush_completed_io() now first try to flush completed io and when wait for any outstanding unwritten io via ext4_unwritten_wait() 2) Rename function to more appropriate name. 3) Assert that all callers of ext4_flush_unwritten_io should hold i_mutex to prevent endless wait Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz>
-
- 29 9月, 2012 1 次提交
-
-
由 Dmitry Monakhov 提交于
AIO/DIO prefix is wrong because it account unwritten extents which also may be scheduled from buffered write endio Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 7月, 2012 4 次提交
-
-
由 Jan Kara 提交于
The last user of ext4_mark_super_dirty() in ext4_file_open() is so rare it can well be modifying the superblock properly by journalling the change. Change it and get rid of ext4_mark_super_dirty() as it's not needed anymore. Artem: small amendments. Artem: tested using xfstests for both journalled and non-journalled ext4. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Tested-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
-
由 Zheng Liu 提交于
Aligned and overwrite direct I/O can be parallelized. In ext4_file_dio_write, we first check whether these conditions are satisfied or not. If so, we take i_data_sem and release i_mutex lock directly. Meanwhile iocb->private is set to indicate that this is a dio overwrite, and it will be handled in ext4_ext_direct_IO. [ Added fix from Dan Carpenter to fix locking bug on the error path. ] CC: Tao Ma <tm@tao.ma> CC: Eric Sandeen <sandeen@redhat.com> CC: Robin Dong <hao.bigrat@gmail.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
-
由 Eric Sandeen 提交于
Use the new functionality in generic_file_llseek_size() to accept a custom EOF position, and un-cut-and-paste all the vfs llseek code from ext4. Also fix up comments on ext4_llseek() to reflect reality. Signed-off-by: NEric Sandeen <sandeen@redaht.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Sandeen 提交于
For ext3/4 htree directories, using the vfs llseek function with SEEK_END goes to i_size like for any other file, but in reality we want the maximum possible hash value. Recent changes in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c, but replicating this core code seems like a bad idea, especially since the copy has already diverged from the vfs. This patch updates generic_file_llseek_size to accept both a custom maximum offset, and a custom EOF position. With this in place, ext4_dir_llseek can pass in the appropriate maximum hash position for both maxsize and eof, and get what it wants. As far as I know, this does not fix any bugs - nfs in the kernel doesn't use SEEK_END, and I don't know of any user who does. But some ext4 folks seem keen on doing the right thing here, and I can't really argue. (Patch also fixes up some comments slightly) Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 7月, 2012 1 次提交
-
-
由 Zheng Liu 提交于
ext4_file_dio_write is defined in order to split buffered IO and direct IO in ext4. This patch just refactor some stuff in write path. CC: Tao Ma <tm@tao.ma> CC: Eric Sandeen <sandeen@redhat.com> CC: Robin Dong <hao.bigrat@gmail.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 29 5月, 2012 1 次提交
-
-
由 Zheng Liu 提交于
The generic_file_aio_write() function returns ssize_t, and ext4_file_write() returns a ssize_t, so use a ssize_t to collect the return value from generic_file_aio_write(). It shouldn't matter since the VFS read/write paths shouldn't allow a read greater than MAX_INT, but there was previously a bug in the AIO code paths, and it's best if we use a consistent type so that the return value from generic_file_aio_write() can't get truncated. Reported-by: NJouni Siren <jouni.siren@iki.fi> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 10月, 2011 1 次提交
-
-
由 Andi Kleen 提交于
This gives ext4 the benefits of unlocked llseek. Cc: tytso@mit.edu Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 25 10月, 2011 1 次提交
-
-
由 Darrick J. Wong 提交于
In ext4_file_open, the filesystem records the mountpoint of the first file that is opened after mounting the filesystem. It does this by allocating a 64-byte stack buffer, calling d_path() to grab the mount point through which this file was accessed, and then memcpy()ing 64 bytes into the superblock's s_last_mounted field, starting from the return value of d_path(), which is stored as "cp". However, if cp > buf (which it frequently is since path components are prepended starting at the end of buf) then we can end up copying stack data into the superblock. Writing stack variables into the superblock doesn't sound like a great idea, so use strlcpy instead. Andi Kleen suggested using strlcpy instead of strncpy. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 26 7月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Replace the ->check_acl method with a ->get_acl method that simply reads an ACL from disk after having a cache miss. This means we can replace the ACL checking boilerplate code with a single implementation in namei.c. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 7月, 2011 1 次提交
-
-
由 Josef Bacik 提交于
Since Ext4 has its own lseek we need to make sure it handles SEEK_HOLE/SEEK_DATA. For now just do the same thing that is done in the generic case, somebody else can come along and make it do fancy things later. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 5月, 2011 1 次提交
-
-
由 Jan Kara 提交于
Trivial conversion. Fixup one error handling case calling vmtruncate() and remove ->truncate callback. We also fix a bug that IS_IMMUTABLE and IS_APPEND files could not be truncated during failed writes. In fact, the test can be completely removed as upper layers do necessary permission checks for truncate in do_sys_[f]truncate() and may_open() anyway. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 12 2月, 2011 1 次提交
-
-
由 Eric Sandeen 提交于
ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 1月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently all filesystems except XFS implement fallocate asynchronously, while XFS forced a commit. Both of these are suboptimal - in case of O_SYNC I/O we really want our allocation on disk, especially for the !KEEP_SIZE case where we actually grow the file with user-visible zeroes. On the other hand always commiting the transaction is a bad idea for fast-path uses of fallocate like for example in recent Samba versions. Given that block allocation is a data plane operation anyway change it from an inode operation to a file operation so that we have the file structure available that lets us check for O_SYNC. This also includes moving the code around for a few of the filesystems, and remove the already unnedded S_ISDIR checks given that we only wire up fallocate for regular files. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 1月, 2011 1 次提交
-
-
由 Theodore Ts'o 提交于
Replace the jbd2_inode structure (which is 48 bytes) with a pointer and only allocate the jbd2_inode when it is needed --- that is, when the file system has a journal present and the inode has been opened for writing. This allows us to further slim down the ext4_inode_info structure. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 10月, 2010 1 次提交
-
-
由 Toshiyuki Okajima 提交于
The llseek system call should return EINVAL if passed a seek offset which results in a write error. What this maximum offset should be depends on whether or not the huge_file file system feature is set, and whether or not the file is extent based or not. If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be written (write systemcall) is different from the maximum size which can be sought (lseek systemcall). For example, the following 2 cases demonstrates the differences between the maximum size which can be written, versus the seek offset allowed by the llseek system call: #1: mkfs.ext3 <dev>; mount -t ext4 <dev> #2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev> Table. the max file size which we can write or seek at each filesystem feature tuning and file flag setting +============+===============================+===============================+ | \ File flag| | | | \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL | |case \| | | +------------+-------------------------------+-------------------------------+ | #1 | write: 2194719883264 | write: -------------- | | | seek: 2199023251456 | seek: -------------- | +------------+-------------------------------+-------------------------------+ | #2 | write: 4402345721856 | write: 17592186044415 | | | seek: 17592186044415 | seek: 17592186044415 | +------------+-------------------------------+-------------------------------+ The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes (= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes. (llseek of ext4_file_operations is generic_file_llseek which uses sb->s_maxbytes.) Therefore we create ext4 llseek function which uses 2 maxbytes. The new own function originates from generic_file_llseek(). If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes. Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca>
-
- 27 7月, 2010 1 次提交
-
-
由 Toshiyuki Okajima 提交于
By running the following reproducer, we can confirm that the write system call returns with 0 when it should return the error EFBIG. #!/bin/sh /bin/dd if=/dev/zero of=./img bs=1k count=1 seek=1024k > /dev/null 2>&1 /sbin/mkfs.ext3 -Fq ./img /bin/mount -o loop -t ext4 ./img /mnt /bin/touch /mnt/file strace /bin/dd if=/dev/zero of=/mnt/file conv=notrunc bs=1k count=1 seek=$((2194719883264/1024)) 2>&1 | /bin/egrep "write.* 1024\) = " /bin/umount /mnt exit Signed-off-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Eric Sandeen <sandeen@redhat.com>
-
- 12 6月, 2010 1 次提交
-
-
由 Theodore Ts'o 提交于
We don't need to set s_dirt in most of the ext4 code when journaling is enabled. In ext3/4 some of the summary statistics for # of free inodes, blocks, and directories are calculated from the per-block group statistics when the file system is mounted or unmounted. As a result the superblock doesn't have to be updated, either via the journal or by setting s_dirt. There are a few exceptions, most notably when resizing the file system, where the superblock needs to be modified --- and in that case it should be done as a journalled operation if possible, and s_dirt set only in no-journal mode. This patch will optimize out some unneeded disk writes when using ext4 with a journal. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 5月, 2010 1 次提交
-
-
由 Dmitry Monakhov 提交于
At several places we modify EXT4_I(inode)->i_flags without holding i_mutex (ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_flags. So convert handling of i_flags to use bitops which are atomic. https://bugzilla.kernel.org/show_bug.cgi?id=15792Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 05 3月, 2010 2 次提交
-
-
由 Christoph Hellwig 提交于
Get rid of the initialize dquot operation - it is now always called from the filesystem and if a filesystem really needs it's own (which none currently does) it can just call into it's own routine directly. Rename the now static low-level dquot_initialize helper to __dquot_initialize and vfs_dq_init to dquot_initialize to have a consistent namespace. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Christoph Hellwig 提交于
Currently various places in the VFS call vfs_dq_init directly. This means we tie the quota code into the VFS. Get rid of that and make the filesystem responsible for the initialization. For most metadata operations this is a straight forward move into the methods, but for truncate and open it's a bit more complicated. For truncate we currently only call vfs_dq_init for the sys_truncate case because open already takes care of it for ftruncate and open(O_TRUNC) - the new code causes an additional vfs_dq_init for those which is harmless. For open the initialization is moved from do_filp_open into the open method, which means it happens slightly earlier now, and only for regular files. The latter is fine because we don't need to initialize it for operations on special files, and we already do it as part of the namespace operations for directories. Add a dquot_file_open helper that filesystems that support generic quotas can use to fill in ->open. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 04 3月, 2010 1 次提交
-
-
由 Al Viro 提交于
path to mnt/mnt->mnt_root is no worse than that to mnt->mnt_parent/mnt->mnt_mountpoint *and* needs no pinning the sucker down (mnt is not going away and mnt->mnt_root won't change) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 1月, 2010 1 次提交
-
-
由 Theodore Ts'o 提交于
At several places we modify EXT4_I(inode)->i_state without holding i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage, ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_state. So convert handling of i_state to use bitops which are atomic. Cc: Jan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 9月, 2009 1 次提交
-
-
由 Jan Kara 提交于
The syncing is now properly handled by generic_file_aio_write() so no special ext4 code is needed. CC: linux-ext4@vger.kernel.org CC: tytso@mit.edu Signed-off-by: NJan Kara <jack@suse.cz>
-
- 09 9月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
Don't implement per-filesystem 'extX_permission()' functions that have to be called for every path component operation, and instead just expose the actual ACL checking so that the VFS layer can now do it for us. Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 6月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
This field can be very helpful when a system administrator is trying to sort through large numbers of block devices or filesystem images. What is stored in this field can be ambiguous if multiple filesystem namespaces are in play; what we store in practice is the mountpoint interpreted by the process's namespace which first opens a file in the filesystem. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 3月, 2009 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
With delayed allocation we should not/cannot discard inode prealloc space during file close. We would still have dirty pages for which we haven't allocated blocks yet. With this fix after each get_blocks request we check whether we have zero reserved blocks and if yes and we don't have any writers on the file we discard inode prealloc space. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 24 2月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
When closing a file that had been previously truncated, force any delay allocated blocks that to be allocated so that if the filesystem is mounted with data=ordered, the data blocks will be pushed out to disk along with the journal commit. Many application programs expect this, so we do this to avoid zero length files if the system crashes unexpectedly. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 11月, 2008 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
* Change EXT4_HAS_*_FEATURE to return a boolean * Add a function prototype for ext4_fiemap() in ext4.h * Make ext4_ext_fiemap_cb() and ext4_xattr_fiemap() be static functions * Add lock annotations to mb_free_blocks() Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-