提交 · 0c3f6f655487d12c7a0c16914c98c599043e88d3 · gsplhtlxg / clone-Linux

12 12月, 2017 5 次提交

sctp: implement make_datafrag for sctp_stream_interleave · 0c3f6f65

由 Xin Long 提交于 12月 08, 2017

To avoid hundreds of checks for the different process on I-DATA chunk,
struct sctp_stream_interleave is defined as a group of functions used
to replace the codes in some place where it needs to do different job
according to if the asoc intl_enabled is set.

With these ops, it only needs to initialize asoc->stream.si with
sctp_stream_interleave_0 for normal data if asoc intl_enable is 0,
or sctp_stream_interleave_1 for idata if asoc intl_enable is set in
sctp_stream_init.

After that, the members in asoc->stream.si can be used directly in
some special places without checking asoc intl_enable.

make_datafrag is the first member for sctp_stream_interleave, it's
used to make data or idata frags, called in sctp_datamsg_from_user.
The old function sctp_make_datafrag_empty needs to be adjust some
to fit in this ops.

Note that as idata and data chunks have different length, it also
defines data_chunk_len for sctp_stream_interleave to describe the
chunk size.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

0c3f6f65

sctp: add basic structures and make chunk function for idata · ad05a7a0

由 Xin Long 提交于 12月 08, 2017

sctp_idatahdr and sctp_idata_chunk are used to define and parse
I-DATA chunk format, and sctp_make_idata is a function to build
the chunk.

The I-DATA Chunk Format is defined in section 2.1 of RFC8260.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ad05a7a0

sctp: add asoc intl_enable negotiation during 4 shakehands · 96b120b3

由 Xin Long 提交于 12月 08, 2017

asoc intl_enable will be set when local sp strm_interleave is set
and there's I-DATA chunk in init and init_ack extensions, as said
in section 2.2.1 of RFC8260.

asoc intl_enable indicates all data will be sent as I-DATA chunks.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

96b120b3

sctp: add stream interleave enable members and sockopt · 772a5869

由 Xin Long 提交于 12月 08, 2017

This patch adds intl_enable in asoc and netns, and strm_interleave in
sctp_sock to indicate if stream interleave is enabled and supported.

netns intl_enable would be set via procfs, but that is not added yet
until all stream interleave codes are completely implemented; asoc
intl_enable will be set when doing 4-shakehands.

sp strm_interleave can be set by sockopt SCTP_INTERLEAVING_SUPPORTED
which is also added in this patch. This socket option is defined in
section 4.3.1 of RFC8260.

Note that strm_interleave can only be set by sockopt when both netns
intl_enable and sp frag_interleave are set.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

772a5869

ipvlan: add L2 check for packets arriving via virtual devices · 92ff4264

由 Mahesh Bandewar 提交于 12月 07, 2017

Packets that don't have dest mac as the mac of the master device should
not be entertained by the IPvlan rx-handler. This is mostly true as the
packet path mostly takes care of that, except when the master device is
a virtual device. As demonstrated in the following case -

  ip netns add ns1
  ip link add ve1 type veth peer name ve2
  ip link add link ve2 name iv1 type ipvlan mode l2
  ip link set dev iv1 netns ns1
  ip link set ve1 up
  ip link set ve2 up
  ip -n ns1 link set iv1 up
  ip addr add 192.168.10.1/24 dev ve1
  ip -n ns1 addr 192.168.10.2/24 dev iv1
  ping -c2 192.168.10.2
  <Works!>
  ip neigh show dev ve1
  ip neigh show 192.168.10.2 lladdr <random> dev ve1
  ping -c2 192.168.10.2
  <Still works! Wrong!!>

This patch adds that missing check in the IPvlan rx-handler.
Reported-by: NAmit Sikka <amit.sikka@ericsson.com>
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

92ff4264

11 12月, 2017 9 次提交

netlink: convert netlink tap spinlock to mutex · b1042d35

由 Cong Wang 提交于 12月 06, 2017

Both netlink_add_tap() and netlink_remove_tap() are
called in process context, no need to bother spinlock.

Note, in fact, currently we always hold RTNL when calling
these two functions, so we don't need any other lock at
all, but keeping this lock doesn't harm anything.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

b1042d35

netlink: make netlink tap per netns · 25e3f70f

由 Cong Wang 提交于 12月 06, 2017

nlmon device is not supposed to capture netlink events from
other netns, so instead of filtering events, we can simply
make netlink tap itself per netns.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

25e3f70f

Merge branch 'rhashtable-New-features-in-walk-and-bucket' · 9944a0f2

由 David S. Miller 提交于 12月 11, 2017

Tom Herbert says:

====================
rhashtable: New features in walk and bucket

This patch contains some changes to related rhashtable:

- Above allow rhashtable_walk_start to return void
- Add a functon to peek at the next entry during a walk
- Abstract out function to compute a has for a table
- A library function to alloc a spinlocks bucket array
- Call the above function for rhashtable locks allocation

Tested: Exercised using various operations on an ILA xlat
table.

v2:
 - Apply feedback from Herbert. Don't change semantics of resize
   event reporting and -EAGAIN, just simplify API for callers that
   ignore those.
 - Add end_of_table in iter to reliably tell when the iterator has
   reached to the eno.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

9944a0f2

rhashtable: Call library function alloc_bucket_locks · 64e0cd0d