- 29 2月, 2008 8 次提交
-
-
由 Andrew Paprocki 提交于
This adds a quirk to the Realtek ALC883 table for the Albatron KI690-AM2 motherboard to use the 6stack-dig model. Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
I forgot to set the module owner for the HiFier/Xonar models. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
Add the proper model entry for Fujitsu Lifebook E8410 with ALC262 codec. From: Tony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The some indices of capture elements of AD1988 are wrongly assigned. This patch fixes it. See ALSA bug#3795 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3795Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Fix a wrong version check that would cause an invalid command to be sent to SB 1.0 chips. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a workaround for the feedback pipe of E-Mu 0202/0404 USB devices that reports the number of samples per packet instead of the number of samples per microframe. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HP dv8000 laptop has a problem with Master volume. It's due to the connection of the widget 0x13. When it's connected from the analog amp mixer (0x19), it works as expected mysteriously (ALSA bug#3775): https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3775Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2008 8 次提交
-
-
由 Linus Torvalds 提交于
-
由 Gaston, Jason D 提交于
Add the Intel ICH10 SMBus Controller DeviceID's and updates Tolapai support. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Don't require platform code to be #ifdeffed according to whether I2C is enabled or not ... if it's not enabled, let GCC compile out all I2C device declarations. (Issue noted on an NSLU2 build that didn't configure I2C.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Christian Krafft 提交于
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel if there is no device at that port. This patch adds a check_legacy_ioport call, so probe fails gracefully and thus prevents the oops. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Manuel Lauss 提交于
Commit 8b798c4d broke alchemy build, fix it. Pointed out by Adrian Bunk. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
While working on the PCA9564-platform driver, I sometimes had a glimpse at the pxa-driver. I found some suspicious places, and this patch contains my suggestions. Note: They are not tested, due to no hardware. [JD: Some more fixes.] Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NMike Rapoport <mike@compulab.co.il> Tested-by: NEric Miao <ymiao3@marvell.com>
-
由 Jean Delvare 提交于
Each call to i2c_get_adapter() must be followed by a call to i2c_put_adapter() to release the grabbed reference. Otherwise the reference count grows forever and the adapter can never be unregistered. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NVladimir Ananiev <vovan888@gmail.com> Acked-by: NTony Lindgren <tony@atomide.com>
-
- 24 2月, 2008 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-core: fix kernel-doc warning sata_fsl: fix build with ATA_VERBOSE_DEBUG [libata] ahci: AMD SB700/SB800 SATA support 64bit DMA libata-pmp: clear hob for pmp register accesses libata: automatically use DMADIR if drive/bridge requires it power_state: get rid of write-only variable in SATA pata_atiixp: Use 255 sector limit
-
由 Randy Dunlap 提交于
Fix libata-core kernel-doc warning: Warning(linux-2.6.25-rc2-git6//drivers/ata/libata-core.c:168): No description found for parameter 'ap' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Anton Vorontsov 提交于
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG is defined: CC drivers/ata/sata_fsl.o drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’: drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’ drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’ drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’: drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function) drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once drivers/ata/sata_fsl.c:459: error: for each function it appears in.) drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’: drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function) make[2]: *** [drivers/ata/sata_fsl.o] Error 1 Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Shane Huang 提交于
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341 was added with careless reference to SB600, which should be modified by this patch. Signed-off-by: NShane Huang <shane.huang@amd.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Lord 提交于
>> Mark Lord wrote: >>> Tejun, I've added PMP to sata_mv, and am now trying to get it >>> to work with a Marvell PM attached. > >>> And the behaviour I see is very bizarre. >>> After hard+soft resets, the PM signature is found, >>> and libata interrogates the PM registers. >>> >>> It successfully reads register 0, and then register 1. >>> But all subsequent registers read out (incorrectly) as zeros. ... This behavior has been confirmed by Marvell with a SATA analyzer. The Marvell port-multiplier apparently likes to see clean HOB information when accessing PMP registers. Since sata_mv uses PIO shadow register access, this doesn't happen automatically, as it might in a more purely FIS-based driver (eg. ahci). One way to fix this is to flag these commands with ATA_TFLAG_LBA48, forcing libata to write out the HOB fields with known (zero) values. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Acked-by: NMark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Pavel Machek 提交于
power_state is scheduled for removal, and libata uses it in write-only mode. Remove it. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan Cox 提交于
AHCI needs sorting too but this deals with the old interface Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) [NETFILTER]: fix ebtable targets return [IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly. [NET]: Restore sanity wrt. print_mac(). [NEIGH]: Fix race between neighbor lookup and table's hash_rnd update. [RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK tg3: ethtool phys_id default [BNX2]: Update version to 1.7.4. [BNX2]: Disable parallel detect on an HP blade. [BNX2]: More 5706S link down workaround. ssb: Fix support for PCI devices behind a SSB->PCI bridge zd1211rw: fix sparse warnings rtl818x: fix sparse warnings ssb: Fix pcicore cardbus mode ssb: Make the GPIO API reentrancy safe ssb: Fix the GPIO API ssb: Fix watchdog access for devices without a chipcommon ssb: Fix serial console on new bcm47xx devices ath5k: Fix build warnings on some 64-bit platforms. WDEV, ath5k, don't return int from bool function WDEV: ath5k, fix lock imbalance ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: make IOMMU code respect the segment boundary limits [SPARC64]: Fix cpu trampoline et al. mismatch warnings. [SPARC64]: More sparse warning fixes in process.c [SPARC64]: Fix sparse warning wrt. fault_in_user_windows. [SPARC64]: Kill show_regs32(). [SPARC64]: Fix sparse warnings wrt. __show_regs(). [SPARC64]: Kill show_stackframe{,32}(). [SPARC64]: Fix sparse warnings wrt. machine_alt_power_off().
-
由 Mirco Tischler 提交于
This fixes the following compile error caused by commit 3a2d5b70 ("PM: Introduce PM_EVENT_HIBERNATE callback state") CC [M] drivers/usb/host/u132-hcd.o drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’: drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’ drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function) ... Signed-off-by: NMirco Tischler <mt-ml@gmx.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonwoo Park 提交于
The function ebt_do_table doesn't take NF_DROP as a verdict from the targets. Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Use the added dev_alloc_name() call to create tunnel device name, rather than iterate in a hand-made loop with an artificial limit. Thanks Patrick for noticing this. [ The way this works is, when the device is actually registered, the generic code noticed the '%' in the name and invokes dev_alloc_name() to fully resolve the name. -DaveM ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
MAC_FMT had only one user and we tried to get rid of that, but this created more problems than it solved. As a result, this reverts three commits: 235365f3 ("net/8021q/vlan_dev.c: Use print_mac."), fea5fa87 ("[NET]: Remove MAC_FMT"), and 8f789c48 ("[NET]: Elminate spurious print_mac() calls.") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The neigh_hash_grow() may update the tbl->hash_rnd value, which is used in all tbl->hash callbacks to calculate the hashval. Two lookup routines may race with this, since they call the ->hash callback without the tbl->lock held. Since the hash_rnd is changed with this lock write-locked moving the calls to ->hash under this lock read-locked closes this gap. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
RTM_NEWLINK allows for already existing links to be modified. For this purpose do_setlink() is called which expects address attributes with a payload length of at least dev->addr_len. This patch adds the necessary validation for the RTM_NEWLINK case. The address length for links to be created is not checked for now as the actual attribute length is used when copying the address to the netdevice structure. It might make sense to report an error if less than addr_len bytes are provided but enforcing this might break drivers trying to be smart with not transmitting all zero addresses. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
When asked to blink LEDs the tg3 driver behaves when using: ethtool -p ethX The default value for data is zero, and other drivers interpret this as blink forever (or at least a really long time). The tg3 driver interprets this as blink once. All drivers should have the same behaviour. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Pinter 提交于
Signed-off-by: NOliver Pinter <oliver.pntr@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Chan 提交于
Because of some board issues, we need to disable parallel detect on an HP blade. Without this patch, the link state can become stuck when it goes into parallel detect mode. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The previous patches to workaround the 5706S on an HP blade were not sufficient. The link state still does not change properly in some cases. This patch adds polling to make it completely reliable. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Oleg Nesterov and others have pointed out that on some architectures, the traditional sequence of set_current_state(TASK_INTERRUPTIBLE); if (CONDITION) return; schedule(); is racy wrt another CPU doing CONDITION = 1; wake_up_process(p); because while set_current_state() has a memory barrier separating setting of the TASK_INTERRUPTIBLE state from reading of the CONDITION variable, there is no such memory barrier on the wakeup side. Now, wake_up_process() does actually take a spinlock before it reads and sets the task state on the waking side, and on x86 (and many other architectures) that spinlock is in fact equivalent to a memory barrier, but that is not generally guaranteed. The write that sets CONDITION could move into the critical region protected by the runqueue spinlock. However, adding a smp_wmb() to before the spinlock should now order the writing of CONDITION wrt the lock itself, which in turn is ordered wrt the accesses within the spinlock (which includes the reading of the old state). This should thus close the race (which probably has never been seen in practice, but since smp_wmb() is a no-op on x86, it's not like this will make anything worse either on the most common architecture where the spinlock already gave the required protection). Acked-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: NDmitry Adamushko <dmitry.adamushko@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
- Fix build 'make randconfig' build warning spotted by Toralf Foerster: drivers/scsi/mvsas.c: In function 'mvs_hexdump': drivers/scsi/mvsas.c:715: error: implicit declaration of function 'isalnum' - Remove unneeded prototypes (spotted by hch) Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
(sorry for being offtpoic, but while experts are here...) A "typical" implementation of atomic_add_unless() can return 0 immediately after the first atomic_read() (before doing cmpxchg). In that case it doesn't provide any barrier semantics. See include/asm-ia64/atomic.h as an example. We should either change the implementation, or fix the docs. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Acked-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-