Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:

drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow

So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd3 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Revert commit 62a3ddef ("vfs: fix spinning prevention in prune_icache_sb").

This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.

Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
Signed-off-by: NSuleiman Souhlal <suleiman@google.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Anatol Pomozov identified a race condition that hits module unloading
and re-loading.  To quote Anatol:

 "This is a race codition that exists between kset_find_obj() and
  kobject_put().  kset_find_obj() might return kobject that has refcount
  equal to 0 if this kobject is freeing by kobject_put() in other
  thread.

  Here is timeline for the crash in case if kset_find_obj() searches for
  an object tht nobody holds and other thread is doing kobject_put() on
  the same kobject:

    THREAD A (calls kset_find_obj())     THREAD B (calls kobject_put())
    splin_lock()
                                         atomic_dec_return(kobj->kref), counter gets zero here
                                         ... starts kobject cleanup ....
                                         spin_lock() // WAIT thread A in kobj_kset_leave()
    iterate over kset->list
    atomic_inc(kobj->kref) (counter becomes 1)
    spin_unlock()
                                         spin_lock() // taken
                                         // it does not know that thread A increased counter so it
                                         remove obj from list
                                         spin_unlock()
                                         vfree(module) // frees module object with containing kobj

    // kobj points to freed memory area!!
    kobject_put(kobj) // OOPS!!!!

  The race above happens because module.c tries to use kset_find_obj()
  when somebody unloads module.  The module.c code was introduced in
  commit 6494a93d"

Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.

See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().

[ Side note: the module race does indicate that module loading and
  unloading is not properly serialized wrt sysfs information using the
  module mutex.  That may require further thought, but this is the
  correct fix at the kobject layer regardless. ]
Reported-analyzed-and-tested-by: NAnatol Pomozov <anatol.pomozov@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch attempts to fix:

	https://bugzilla.kernel.org/show_bug.cgi?id=56461

The symptom is a crash and messages like this:

	chrome: Corrupted page table at address 34a03000
	*pdpt = 0000000000000000 *pde = 0000000000000000
	Bad pagetable: 000f [#1] PREEMPT SMP

Ingo guesses this got introduced by commit 611ae8e3 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.

On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).

The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy.  If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).

This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.

BTW, I disassembled and checked that:

	if (tlb->fullmm == 0)
and
	if (!tlb->fullmm && !tlb->need_flush_all)

generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Artem S Tashkinov <t.artem@mailcity.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are remaining target-pending items for v3.9-rc7 code.

  The tcm_vhost patches are more than I'd usually include in a -rc7
  pull, but are changes required for v3.9 to work correctly with the
  pending vhost-scsi-pci QEMU upstream series merge.  (Paolo CC'ed)

  Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
  managing vhost-scsi endpoints has gotten alot of review + testing over
  the past weeks, and MST has ACKed the full series.

  Also, there is a target patch to fix a long-standing bug within
  control CDB handling with Standby/Offline/Transition ALUA port access
  states, that had been incorrectly rejecting the control CDBs required
  for LUN scan to work during these port group states.  CC'ing to
  stable."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
  tcm_vhost: Send bad target to guest when cmd fails
  tcm_vhost: Add vhost_scsi_send_bad_target() helper
  tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
  tcm_vhost: Remove double check of response
  tcm_vhost: Initialize vq->last_used_idx when set endpoint
  tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
  tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access

Pull SCSI fixes from James Bottomley:
 "This is a set of ten bug fixes (and two consisting of copyright year
  update and version number change) pretty much all of which involve
  either a crash or a hang except the removal of the random sleep from
  the qla2xxx driver (which is a coding error so bad, we want it gone
  before anyone has a chance to copy it)."

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
  [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
  [SCSI] ibmvscsi: Fix slave_configure deadlock
  [SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
  [SCSI] qla2xxx: Remove debug code that msleeps for random duration.
  [SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
  [SCSI] qla2xxx: Fix crash during firmware dump procedure.
  [SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
  [SCSI] ipr: dlpar failed when adding an adapter back
  [SCSI] ipr: fix addition of abort command to HRRQ free queue
  [SCSI] st: Take additional queue ref in st_probe
  [SCSI] libsas: use right function to alloc smp response
  [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter

Pull CIFS fix from Steve French:
 "Fixes a regression in cifs in which a password which begins with a
  comma is parsed incorrectly as a blank password"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Allow passwords which begin with a delimitor

Pull sound fixes from Takashi Iwai:
 "This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
  tegra, and soc-compress) and an endian fix for NI USB-audio devices,
  update for Mark's e-mail address.

  No scary changes, AFAIS."

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  MAINTAINERS: Update e-mail address
  ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
  ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
  ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
  ASoC: tegra: Don't claim to support PCM pause and resume
  ASoC: Samsung: set drvdata before adding secondary device
  ASoC: Samsung: return error if drvdata is not set
  ASoC: compress: Cancel delayed power down if needed
  ASoC: core: Fix to check return value of snd_soc_update_bits_locked()

Merge tag 'asoc-maintainers-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

MAINTAINERS: Update e-mail address

Update the e-mail address I use for subsystems.

Update the e-mail address I use for subsystems.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Merge tag 'asoc-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.9

A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones.  Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.

Pull slave-dmaengine fixes from Vinod Koul:
 "The first one fixes issue in pl330 to check for DT compatible and
  the second one fixes omap-dma to start without delay"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: omap-dma: Start DMA without delay for cyclic channels
  DMA: PL330: Add check if device tree compatible

Pull power management fixes from Rafael Wysocki:

 - System reboot/halt fix related to CPU offline ordering from Huacai
   Chen.

 - intel_pstate driver fix for a delay time computation error
   occasionally crashing systems using it from Dirk Brandewie.

* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
  cpufreq / intel_pstate: Set timer timeout correctly

Pull regmap revert from Mark Brown:
 "regmap: Back out work buffer fix

  This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
  _regmap_raw_write()) since it turns out that it can cause issues when
  taken in isolation from the other changes in -next that lead to its
  discovery.  On the basis that nobody noticed the problems for quite
  some time without that subsequent work let's drop it from v3.9."

* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Back out work buffer fix

Pull GPIO fix from Linus Walleij:
 "Oneliner fix for the PCA 953x driver."

* tag 'gpio-fixes-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix irq_domain_add_simple usage

Pull ARM SoC bug fixes from Arnd Bergmann:
 "A little later during the week than the last few pull requests, since
  there was very little that came in before 3.9-rc6.  At least things
  have calmed down again here.

  Some important bug fixes that came in over the last 10 days, mostly
  mvebu and imx:

   - Multiple regressions on i.mx following the conversion of the clock
     code, hopefully the last we are seeing of those.
   - a regression in the mvebu irq handling code
   - An incorrect register offset in the rewritten s3c24xx irq code.
   - Two bugs in setting up the iomega_ix2_200 machine
   - Turning on an extra bus clock on imx
   - A MAINTAINERS file entry for Roland Stigge"

* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
  ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
  ARM i.MX6: Fix ldb_di clock selection
  ARM: imx: provide twd clock lookup from device tree
  ARM: imx35 Bugfix admux clock
  ARM: clk-imx35: Bugfix iomux clock
  ARM: mxs: Slow down the I2C clock speed
  MAINTAINERS: Add maintainer for LPC32xx
  ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED

The dereference to 'put_index' should be moved below the NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().

Fixes regression introduced by commit
0e8f2fda (gpio: pca953x: use simple
irqdomain)
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

From Jason Cooper <jason@lakedaemon.net>:

mvebu fixes for v3.9 round 3

 - Kirkwood
    - a couple of small fixes for the Iomega ix2-200 board (ether and led)
 - mvebu
    - allow GPIO button to work on Mirabox when running SMP

* tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.

This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.

Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Send bad target to guest in case:
1) we can not allocate the cmd
2) fail to submit the cmd
Signed-off-by: NAsias He <asias@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Share the send bad target code with other use cases.
Signed-off-by: NAsias He <asias@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work,
we will leak the tv_vmd. Free tv_vmd on fail path.
Signed-off-by: NAsias He <asias@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We did the length of response check twice.
Signed-off-by: NAsias He <asias@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Pull char/misc fix from Greg Kroah-Hartman:
 "Here is a single Kconfig dependancy build fix for 3.9.

  It's been in linux-next for a while, and fixes a problem that has been
  reported multiple times."

* tag 'char-misc-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc/vmw_vmci: Add dependency on CONFIG_NET

Pull tty/serial fixes from Greg Kroah-Hartman:
 "Here are 4 small tty/serial fixes for 3.9.

  One fixes a bug where we broke the documentation build, and the others
  fix reported problems in some serial drivers.

  All have been in linux-next for a while"

* tag 'tty-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init()
  Revert "tty/8250_pnp: serial port detection regression since v3.7"
  OMAP/serial: Revert bad fix of Rx FIFO threshold granularity
  tty: Documentation: fix a path in a DocBook template

Merge tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Two bug-fixes:
   - Early bootup issue found on DL380 machines
   - Fix for the timer interrupt not being processed right awaym leading
     to quite delayed time skew on certain workloads"

* tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables.
  xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.

Merge tag 'trace-fixes-3.9-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Namhyung Kim fixed a long standing bug that can cause a kernel panic.

  If the function profiler fails to allocate memory for everything, it
  will do a double free on the same pointer which can cause a panic"

* tag 'trace-fixes-3.9-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix double free when function profile init failed

Pull networking fixes from David Miller:

 1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix
    from Artem Savkov.

 2) Fix regression in TCP ICMPv6 processing, we do not want to treat
    redirects as socket errors, from Christoph Paasch.

 3) Fix several recvmsg() msg_name kernel memory leaks into userspace,
    in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom,
    NFC, Rose, TIPC, and VSOCK.  From Mathias Krause and Wei Yongjun.

 4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula
    Braun and Eric Dumazet.

 5) CAN gw.c code does kfree() on SLAB cache memory, use
    kmem_cache_free() instead.  Fix from Wei Yongjun.

 6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want
    an skb->sk socket context available for these packets, but nothing
    else requires it.  From Eric Dumazet and Paul Moore.

 7) Fix ipv4 address lifetime processing so that we don't perform
    sleepable acts inside of rcu_read_lock() sections, do them in an
    rtnl_lock() section instead.  From Jiri Pirko.

 8) mvneta driver accidently sets HW features after device registry, it
    should do so beforehand.  Fix from Willy Tarreau.

 9) Fix bonding unload races more correctly, from Nikolay Aleksandrov
    and Veaceslav Falico.

10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong
    header size argument.  Fix from Michael Riesch.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  lsm: add the missing documentation for the security_skb_owned_by() hook
  bnx2x: Prevent null pointer dereference in AFEX mode
  e100: Add dma mapping error check
  selinux: add a skb_owned_by() hook
  can: gw: use kmem_cache_free() instead of kfree()
  netrom: fix invalid use of sizeof in nr_recvmsg()
  qeth: fix qeth_wait_for_threads() deadlock for OSN devices
  af_iucv: fix recvmsg by replacing skb_pull() function
  rtnetlink: Call nlmsg_parse() with correct header length
  bonding: fix bonding_masters race condition in bond unloading
  Revert "bonding: remove sysfs before removing devices"
  net: mvneta: enable features before registering the driver
  hyperv: Fix RNDIS send_completion code path
  hyperv: Fix a kernel warning from netvsc_linkstatus_callback()
  net: ipv4: fix schedule while atomic bug in check_lifetime()
  net: ipv4: reset check_lifetime_work after changing lifetime
  bnx2x: Fix KR2 rapid link flap
  sctp: remove 'sridhar' from maintainers list
  VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg()
  VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue()
  ...

Pull C6X fix from Mark Salter.

Final (?) fix from the barrier discussion.

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  add memory barrier to arch_local_irq_restore

Fixes a regression in cifs_parse_mount_options where a password
which begins with a delimitor is parsed incorrectly as being a blank
password.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Unfortunately we didn't catch the missing comments earlier when the
patch was merged.
Signed-off-by: NPaul Moore <pmoore@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cnic module is responsible for initializing various bnx2x structs
via callbacks provided by the bnx2x module.
One such struct is the queue object for the FCoE queue.

If a device is working in AFEX mode and its configuration allows FCoE yet
the cnic module is not loaded, it's very likely a null pointer dereference
will occur, as the bnx2x will erroneously access the FCoE's queue object.

Prevent said access until cnic properly registers itself.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

e100 uses pci_map_single, but fails to check for a dma mapping error after its
use, resulting in a stack trace:

[   46.656594] ------------[ cut here ]------------
[   46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950()
[   46.657004] Hardware name: To Be Filled By O.E.M.
[   46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map
error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single]
[   46.657004] Modules linked in:
[   46.657004]  w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus
snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc
e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp
k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd
sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core
sata_promise crc_itu_t
[   46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1
[   46.657004] Call Trace:
[   46.657004]  <IRQ>  [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0
[   46.657004]  [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50
[   46.657004]  [<ffffffff81364cfb>] check_unmap+0x47b/0x950
[   46.657004]  [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70
[   46.657004]  [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100]
[   46.657004]  [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100]
[   46.657004]  [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100]
[   46.657004]  [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370
[   46.657004]  [<ffffffff8159ddb2>] net_rx_action+0x172/0x370
[   46.657004]  [<ffffffff810703bf>] __do_softirq+0xef/0x3d0
[   46.657004]  [<ffffffff816e4ebc>] call_softirq+0x1c/0x30
[   46.657004]  [<ffffffff8101c485>] do_softirq+0x85/0xc0
[   46.657004]  [<ffffffff81070885>] irq_exit+0xd5/0xe0
[   46.657004]  [<ffffffff816e5756>] do_IRQ+0x56/0xc0
[   46.657004]  [<ffffffff816dacb2>] common_interrupt+0x72/0x72
[   46.657004]  <EOI>  [<ffffffff816da1eb>] ?
_raw_spin_unlock_irqrestore+0x3b/0x70
[   46.657004]  [<ffffffff816d124d>] __slab_free+0x58/0x38b
[   46.657004]  [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120
[   46.657004]  [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320
[   46.657004]  [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff811b0692>] kmem_cache_free+0x312/0x320
[   46.657004]  [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40
[   46.657004]  [<ffffffff811e8c28>] destroy_inode+0x38/0x60
[   46.657004]  [<ffffffff811e8d5e>] evict+0x10e/0x1a0
[   46.657004]  [<ffffffff811e9605>] iput+0xf5/0x180
[   46.657004]  [<ffffffff811e4338>] dput+0x248/0x310
[   46.657004]  [<ffffffff811ce0e1>] __fput+0x171/0x240
[   46.657004]  [<ffffffff811ce26e>] ____fput+0xe/0x10
[   46.657004]  [<ffffffff8108d54c>] task_work_run+0xac/0xe0
[   46.657004]  [<ffffffff8106c6ed>] do_exit+0x26d/0xc30
[   46.657004]  [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120
[   46.657004]  [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b
[   46.657004]  [<ffffffff8106d139>] do_group_exit+0x49/0xc0
[   46.657004]  [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20
[   46.657004]  [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b
[   46.657004] ---[ end trace 4468c44e2156e7d1 ]---
[   46.657004] Mapped at:
[   46.657004]  [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140
[   46.657004]  [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100]
[   46.657004]  [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100]
[   46.657004]  [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100]
[   46.657004]  [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0

Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the
dma_mapping_error check in the obvious place

This was reported previously here:
http://article.gmane.org/gmane.linux.network/257893

But nobody stepped up and fixed it.

CC: Josh Boyer <jwboyer@redhat.com>
CC: e1000-devel@lists.sourceforge.net
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NMichal Jaegermann <michal@harddata.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull another nfs fixlet from Trond Myklebust:
 "I suddenly noticed that a one-line issue that I _thought_ I had fixed
  with the nfs41_walk_client_list patch was apparently still there in
  the pull request I sent earlier today.  I'm very sorry for not
  catching that in time.

   - Fix a brain fart in nfs41_walk_client_list"

* tag 'nfs-for-3.9-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Doh! Typo in the fix to nfs41_walk_client_list