- 19 12月, 2008 8 次提交
-
-
由 Ingo Molnar 提交于
Impact: build fix Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: change task balancing to save power more agressively Add SD_BALANCE_NEWIDLE flag at MC level and CPU level if sched_mc is set. This helps power savings and will not affect performance when sched_mc=0 Ingo and Mike Galbraith have optimised the SD flags by removing SD_BALANCE_NEWIDLE at MC and CPU level. This helps performance but hurts power savings since this slows down task consolidation by reducing the number of times load_balance is run. sched: fine-tune SD_MC_INIT commit 14800984 Author: Mike Galbraith <efault@gmx.de> Date: Fri Nov 7 15:26:50 2008 +0100 sched: re-tune balancing -- revert commit 9fcd18c9 Author: Ingo Molnar <mingo@elte.hu> Date: Wed Nov 5 16:52:08 2008 +0100 This patch selectively enables SD_BALANCE_NEWIDLE flag only when sched_mc is set to 1 or 2. This helps power savings by task consolidation and also does not hurt performance at sched_mc=0 where all power saving optimisations are turned off. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: tweak task balancing to save power more agressively Active load balancing is a process by which migration thread is woken up on the target CPU in order to pull current running task on another package into this newly idle package. This method is already in use with normal load_balance(), this patch introduces this method to new idle cpus when sched_mc is set to POWERSAVINGS_BALANCE_WAKEUP. This logic provides effective consolidation of short running daemon jobs in a almost idle system The side effect of this patch may be ping-ponging of tasks if the system is moderately utilised. May need to adjust the iterations before triggering. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: tweak task wakeup to save power more agressively Preferred wakeup cpu (from a semi idle package) has been nominated in find_busiest_group() in the previous patch. Use this information in sched_mc_preferred_wakeup_cpu in function wake_idle() to bias task wakeups if the following conditions are satisfied: - The present cpu that is trying to wakeup the process is idle and waking the target process on this cpu will potentially wakeup a completely idle package - The previous cpu on which the target process ran is also idle and hence selecting the previous cpu may wakeup a semi idle cpu package - The task being woken up is allowed to run in the nominated cpu (cpu affinity and restrictions) Basically if both the current cpu and the previous cpu on which the task ran is idle, select the nominated cpu from semi idle cpu package for running the new task that is waking up. Cache hotness is considered since the actual biasing happens in wake_idle() only if the application is cache cold. This technique will effectively move short running bursty jobs in a mostly idle system. Wakeup biasing for power savings gets automatically disabled if system utilisation increases due to the fact that the probability of finding both this_cpu and prev_cpu idle decreases. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: extend load-balancing code (no change in behavior yet) When the system utilisation is low and more cpus are idle, then the process waking up from sleep should prefer to wakeup an idle cpu from semi-idle cpu package (multi core package) rather than a completely idle cpu package which would waste power. Use the sched_mc balance logic in find_busiest_group() to nominate a preferred wakeup cpu. This info can be stored in appropriate sched_domain, but updating this info in all copies of sched_domain is not practical. Hence this information is stored in root_domain struct which is one copy per partitioned sched domain. The root_domain can be accessed from each cpu's runqueue and there is one copy per partitioned sched domain. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: change load-balancing direction to match that of irqbalanced Just in case two groups have identical load, prefer to move load to lower logical cpu number rather than the present logic of moving to higher logical number. find_busiest_group() tries to look for a group_leader that has spare capacity to take more tasks and freeup an appropriate least loaded group. Just in case there is a tie and the load is equal, then the group with higher logical number is favoured. This conflicts with user space irqbalance daemon that will move interrupts to lower logical number if the system utilisation is very low. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Gautham R Shenoy 提交于
Impact: extend range of /sys/devices/system/cpu/sched_mc_power_savings Currently the sched_mc/smt_power_savings variable is a boolean, which either enables or disables topology based power savings. This patch extends the behaviour of the variable from boolean to multivalued, such that based on the value, we decide how aggressively do we want to perform powersavings balance at appropriate sched domain based on topology. Variable levels of power saving tunable would benefit end user to match the required level of power savings vs performance trade-off depending on the system configuration and workloads. This version makes the sched_mc_power_savings global variable to take more values (0,1,2). Later versions can have a single tunable called sched_power_savings instead of sched_{mc,smt}_power_savings. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vaidyanathan Srinivasan 提交于
Impact: cleanup BALANCE_FOR_MC_POWER and similar macros defined in sched.h are not constants and have various condition checks and significant amount of code that is not suitable to be contain in a macro. Also there could be side effects on the expressions passed to some of them like test_sd_parent(). This patch converts all complex macros related to power savings balance to inline functions. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 12月, 2008 30 次提交
-
-
由 Mike Travis 提交于
Impact: add new boot parameter Use possible_cpus=NUM kernel parameter to extend the number of possible cpus. The ability to HOTPLUG ON cpus that are "possible" but not "present" is dealt with in a later patch. Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Impact: fix potential APIC crash In determining the destination apicid, there are usually three cpumasks that are considered: the incoming cpumask arg, cfg->domain and the cpu_online_mask. Since we are just introducing the cpu_mask_to_apicid_and function, make sure it includes the cpu_online_mask in it's evaluation. [Added with this patch.] There are two io_apic.c functions that did not previously use the cpu_online_mask: setup_IO_APIC_irq and msi_compose_msg. Both of these simply used cpu_mask_to_apicid(cfg->domain & TARGET_CPUS), and all but one arch (NUMAQ[*]) returns only online cpus in the TARGET_CPUS mask, so the behavior is identical for all cases. [*: NUMAQ bug?] Note that alloc_cpumask_var is only used for the 32-bit cases where it's highly likely that the cpumask set size will be small and therefore CPUMASK_OFFSTACK=n. But if that's not the case, failing the allocate will cause the same return value as the default. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
This done for conflict prevention: we merge it into the cpus4096 tree because upcoming cpumask changes will touch apic.c that would collide with x86/apic otherwise.
-
由 Ingo Molnar 提交于
-
git://aeryn.fluff.org.uk/bjdooks/linux由 Linus Torvalds 提交于
* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-s3c2410: fix check for being in suspend. i2c-cpm: Detect and report NAK right away instead of timing out
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Add JBD2 compat feature bit. ocfs2: Always update xattr search when creating bucket.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display USB: set correct configuration in probe of ti_usb_3410_5052 USB: add 5372:2303 to pl2303 USB: skip Set-Interface(0) if already in altsetting 0 USB: fix comment about endianness of descriptors USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour usbmon: drop bogus 0t from usbmon.txt USB: gadget: fix rndis working at high speed USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID USB: tty: SprogII DCC controller identifiers usb-storage: update unusual_devs entry for Nokia 5310 USB: Unusual devs patch for Nokia 3500c USB: storage: unusual_devs.h: Nokia 3109c addition USB: fix problem with usbtmc driver not loading properly
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: STAGING: Move staging drivers back to staging-specific menu driver core: add newlines to debugging enabled/disabled messages xilinx_hwicap: remove improper wording in license statement driver core: fix using 'ret' variable in unregister_dynamic_debug_module
-
由 Jeff Layton 提交于
While testing a kernel with memory poisoning enabled, I saw some warnings about the redzone getting clobbered when chasing DFS referrals. The buffer allocation for the unicode converted version of the searchName is too small and needs to take null termination into account. Signed-off-by: NJeff Layton <jlayton@redhat.com> Acked-by: NSteve French <sfrench@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc: Fix corruption error in rh_alloc_fixed() powerpc/fsl-booke: Fix the miss interrupt restore
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Marcel Holtmann 提交于
Both messages are missing the newline and thus dmesg output gets scrambled. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
GPLv2 doesn't allow additional restrictions to be imposed on any code, so this wording needs to be removed from these files. Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Johann Felix Soden 提交于
The 'ret' variable is assigned, but not used in the return statement. Fix this. Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net> Acked-by: NJason Baron <jbaron@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Provencher 提交于
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: NMike Provencher <mike.provencher@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Arnold 提交于
This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: NMatthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
When a driver unbinds from an interface, usbcore always sends a Set-Interface request to reinstall altsetting 0. Unforunately, quite a few devices have buggy firmware that crashes when it receives this request. To avoid such problems, this patch (as1180) arranges to send the Set-Interface request only when the interface is not already in altsetting 0. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Endecott 提交于
This patch fixes a comment and clarifies the documentation about the endianness of descriptors. The current policy is that descriptors will be little-endian at the API even on big-endian systems; however the /proc/bus/usb API predates this policy and presents descriptors with some multibyte fields byte-swapped. Signed-off-by: NPhil Endecott <usb_endian_patch@chezphil.org> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
Commit 7bb5ea54 (usb gadget serial: use composite gadget framework) changed the default for the use_acm parameter from 0 to 1. Update the documentation to match. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
The example is incorrect: there is no 0t socket (the '1t' format has no bus number in it). Also, correct the broken sentence for USB Tag. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Fix a bug specific to highspeed mode in the recently updated RNDIS support: it wasn't setting up the high speed notification endpoint, which prevented high speed RNDIS links from working. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Tested-by: NAnand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Ewert 提交于
The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: NAndrew Ewert <andrew@ewertenergy.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1179) updates the unusual_devs entry for Nokia's 5310 phone to include a more recent firmware revision. This fixes Bugzilla #12099. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Tested-by: NRobson Roberto Souza Peixoto <robsonpeixoto@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ozan Sener 提交于
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0060 Rev= 5.51 S: Manufacturer=Nokia S: Product=Nokia 3500c S: SerialNumber=357687010280751 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: Ozan Sener <themgzzy@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 CSÉCSY László 提交于
2.6.26(.x, cannot remember) could handle the microSD card in my Nokia 3109c attached via USB as mass storage, 2.6.27(.x, up to and included 2.6.27.8) cannot. Please find the attached patch which fixes this regression, and a copy of /proc/bus/usb/devices with my phone plugged in running with this patch on Frugalware. T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0421 ProdID=0063 Rev= 6.01 S: Manufacturer=Nokia S: Product=Nokia 3109c S: SerialNumber=359561013742570 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms From: CSÉCSY László <boobaa@frugalware.org> Cc: Phil Dibowitz <phil@ipom.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
The usbtmc driver forgot to export its device table to userspace. Without this, it is never loaded properly when such a device is seen by the system. Cc: Marcel Janssen <marcel.janssen@admesy.nl> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Guillaume Knispel 提交于
There is an error in rh_alloc_fixed() of the Remote Heap code: If there is at least one free block blk won't be NULL at the end of the search loop, so -ENOMEM won't be returned and the else branch of "if (bs == s || be == e)" will be taken, corrupting the management structures. Signed-off-by: NGuillaume Knispel <gknispel@proformatique.com> Acked-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Dave Liu 提交于
The commit e5e774d8 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted introduce one issue. that casue the problem like this: Kernel BUG at c00b19fc [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC8572 DS Modules linked in: NIP: c00b19fc LR: c00b1c34 CTR: c0064e88 REGS: ef02b7b0 TRAP: 0700 Not tainted (2.6.28-rc8-00057-g1bda7128) MSR: 00021000 <ME> CR: 44048028 XER: 20000000 TASK = ef02c000[1] 'init' THREAD: ef02a000 GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400 GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948 GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1 GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984 NIP [c00b19fc] __find_get_block+0x24/0x238 LR [c00b1c34] __getblk+0x24/0x2a0 Call Trace: [ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable) [ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0 [ef02b910] [c00b4ae4] __bread+0x14/0xf8 [ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138 [ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828 [ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808 [ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144 [ef02bb50] [c00fba38] ext2_readpages+0x24/0x34 [ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230 [ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0 [ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0 [ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4 [ef02bd10] [c000ed90] handle_page_fault+0xc/0x80 [ef02bdd0] [c00c7adc] set_brk+0x74/0x9c [ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180 [ef02be70] [c00945f0] search_binary_handler+0xa8/0x274 [ef02bea0] [c0095818] do_execve+0x19c/0x1d4 [ef02bed0] [c000766c] sys_execve+0x58/0x84 [ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c [ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c [ef02bfc0] [c0001e04] init_post+0xb0/0xf0 [ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4 [ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68 Instruction dump: 4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034 91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008 The issue was the beqlr returns early but we haven't reenabled interrupts. Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 17 12月, 2008 2 次提交
-
-
由 Ingo Molnar 提交于
Impact: build fix The sparseirq tree crossed with the cpumask changes, fix the fallout. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Conflicts: arch/x86/kernel/crash.c Merged for semantic conflict: arch/x86/kernel/reboot.c
-