Convert the uses of memcpy to ether_addr_copy because
for some architectures it is smaller and faster.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the more obvious uses of memcpy to ether_addr_copy.

There are still uses of memcpy that could be converted but
these addresses are __aligned(2).

Convert a couple uses of 6 in gr_private.h to ETH_ALEN.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ethtool speed values are just numbers of megabits and there is no need
to add SPEED_40000.  To be consistent, use integer constants directly
for all speeds.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lets clean up bpf_dbg a bit and improve its code slightly
in various areas: i) Get rid of some macros as there's no
good reason for keeping them, ii) remove one unused variable
and reduce scope of various variables found by cppcheck,
iii) Close non-default file descriptors when exiting the shell.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drivers are allowed to set NETIF_F_SCTP_CSUM if they have
hardware crc32c checksumming support for the SCTP protocol.
Currently, NETIF_F_SCTP_CSUM flag is available in igb,
ixgbe, i40e/i40evf drivers and for vlan devices.

If we don't have NETIF_F_SCTP_CSUM then crc32c is done
through CPU instructions, invoked from crypto layer, or
if not available as slow-path fallback in software.

Currently, loopback device propagates checksum offloading
feature flags in dev->features, but is missing SCTP checksum
offloading. Therefore, account for NETIF_F_SCTP_CSUM as
well.

Before patch:

./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY
SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

4194304 4194304   4096    10.00    4683.50

After patch:

./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY
SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

4194304 4194304   4096    10.00    15348.26
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The documentation misses a few of the supported flags. Fix this. Also
respect the dependency to CONFIG_XFRM for the IPSEC flag.

Cc: Fan Du <fan.du@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'out' label is just a relict from previous times as pgctrl_write()
had multiple error paths. Get rid of it and simply return right away
on errors.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a privileged user writes an empty string to /proc/net/pktgen/pgctrl
the code for stripping the (then non-existent) '\n' actually writes the
zero byte at index -1 of data[]. The then still uninitialized array will
very likely fail the command matching tests and the pr_warning() at the
end will therefore leak stack bytes to the kernel log.

Fix those issues by simply ensuring we're passed a non-empty string as
the user API apparently expects a trailing '\n' for all commands.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Shahed Shaikh says:

====================
qlcnic: Re-factoring and enhancements

This patch series includes following changes -
* Re-factored firmware minidump template header handling
* Support to make 8 vNIC mode application to work with 16 vNIC mode
* Enhance error message logging when adapter is in failed state and
  when adapter lock access fails.
* Allow vlan0 traffic
* update MAINTAINERS

Please apply this series to net-next.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep myself as only maintainer for qlcnic driver and update
group email alias to Dept-HSGLinuxNICDev@qlogic.com
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarish Patil <harish.patil@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Adapter allows vlan0 traffic in case of SR-IOV after setting
  QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Qlogic application interface in the driver which has larger than 8 vNIC
configuration support has been updated to handle the following cases:

o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range
o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were
  not contiguous and only 8 or lower number of total VNICs were enabled
o Disconnect in the vNIC mapping between application and driver when the
  enabled VNICs were dis contiguous
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately,
as it may change for 82xx and 83xx/84xx adapter type independently.
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amir Vadai says:

====================
net/mlx4: Mellanox driver update 01-01-2014

This small patchset has a fix to a bogus usage of
netif_get_num_default_rss_queues() in mlx4_en driver.

Changes from V1:
- Removed affinity_hint patch, to make it a generic instead of mlx specific

Changes from V0:
- Instead of reverting the netif_get_num_default_rss_queues() in mlx4_en,
  fixing it to limit the actual number of receive queues instead of limiting
  the number of IRQ's.

Patchset was applied and tested against commit: cb6e926e "ipv6:fix checkpatch
errors with assignment in if condition"
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fix a performance bug introduced by commit 90b1ebe7 "mlx4: set
maximal number of default RSS queues", which limits the numbers of IRQs
opened by core module.
The limit should be on the number of queues in the indirection table -
rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core
initialization instead of in mlx4_en, prevented using "ethtool -L" to
utilize all the CPU's, when performance mode is prefered, since limiting
this number to 8 reduces overall packet rate by 15%-50% in multiple TCP
streams applications.

For example, after running ethtool -L <ethx> rx 16

          Packet rate
Before the fix  897799
After the fix   1142070

Results were obtained using netperf:

S=200 ; ( for i in $(seq 1 $S) ; do ( \
  netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \
  wait ; done | grep "1        1" | awk '{SUM+=$6} END {print SUM}' )

CC: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mlx4_en_add() is too long.
Moving set number of RX rings to a utiltity function to improve
readability and modulization of the code.
Signed-off-by: NIdo Shamay <idos@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bond_xxx_info_query() was already in RTNL, so no need to use
bond lock to protect the bond slave list, so remove it.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bond_info_show_master already in RCU read-side critical section,
and the we access curr_active_slave without the curr_slave_lock, we
could not sure whether the curr_active_slave will be changed during
the processing, so use RCU to protected the pointer.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The __netpoll_setup() will check the slave's flag and ndo_poll_controller just
like the slave_dev_support_netpoll() does, and slave_dev_support_netpoll() was
not used by any place, so remove it.

Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
1) Introduce skb_to_sgvec_nomark function to add further data to the sg list
   without calling sg_unmark_end first. Needed to add extended sequence
   number informations. From Fan Du.

2) Add IPsec extended sequence numbers support to the Authentication Header
   protocol for ipv4 and ipv6. From Fan Du.

3) Make the IPsec flowcache namespace aware, from Fan Du.

4) Avoid creating temporary SA for every packet when no key manager is
   registered. From Horia Geanta.

5) Support filtering of SA dumps to show only the SAs that match a
   given filter. From Nicolas Dichtel.

6) Remove caching of xfrm_policy_sk_bundles. The cached socket policy bundles
   are never used, instead we create a new cache entry whenever xfrm_lookup()
   is called on a socket policy. Most protocols cache the used routes to the
   socket, so this caching is not needed.

7)  Fix a forgotten SADB_X_EXT_FILTER length check in pfkey, from Nicolas
    Dichtel.

8) Cleanup error handling of xfrm_state_clone.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Aaron Brown says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e and (mostly to) i40evf.

Mitch provides most the work for this series.  For the vf driver he
requests a reset on a tx hang, removes vlan filtes on close since we
already remove the MAC filters, fixes some crashes, gets rid of PCI DAC
as it does not mean much on virtualized PCIe parts, skips assigning the
device name that just gets renamed anyway, stores the descriptor ring
size in a manner that allows the use of common tx and rx code with the
PF driver and makes a handful of cosmetic fixes.  For i40e he removes
a delay left over from debugging and changes a do/while loop to a for
loop to avoid hitting another delay each time.

Catherine fixes inconsistent MSI and MSI-X messages and bumps the
driver version.

v2: Removed unnecessary periods and redundant OOM message.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the driver versions.

Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix inconsistent use of MSIX and MSI-X in messages.

Change-ID: Iae9ffb42819677c34544719044ed77632e06147d
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the do/while to a for loop, so we don't hit the delay each
time, even when the register is ready for action.
Don't bother to set or clear the QENA_STAT bit as it is
read-only.

Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ain't nothing gonna break my stride, nobody's gonna slow me down,
oh no. I got to keep on moving.

This was originally put in for debugging just-in-case purposes
and never removed.

Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a bogus space.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A bunch of changes merit a new version number, and since these were
made in the new year, update the copyright date.

Change-ID: Ic3f282bf0c20679b9fb06860211afa7c78055bc2
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep the descriptor ring size in the actual ring structs instead of in
the adapter struct. This enables us to use common tx and rx code with
the i40e PF driver.

Also update copyrights.

Change-ID: I2861e599b2b4c76441c062ea14400f4750f54d0e
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't need to set an interface name here; the net core will do
that, and then it will get renamed by udev anyway.

Change-ID: I839a17837d19bedd1f490bff32ac5b85b4bfd97f
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This comment is simply not true.

Change-ID: If006b02b60984601a24257a951ae873dff568008
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure errors are reported at the correct log level, quit printing
the function name every time, and make the messages more consistent in
format.

v2: Removed unnecessary periods and redundant OOM message.

Change-ID: I50e443467519ad3850def131d84626c50612c611
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PCI DAC doesn't really mean much on a virtualized PCI Express part, so
get rid of that check and just always set the HIGHDMA flag in the net
device.

Change-ID: I2040272be0e7934323f470c2bc73fbdd4f93e2b6
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Depending upon the state of the driver, there are several potential
pitfalls on remove. Kill the watchdog task so rmmod doesn't hang.
Check the adapter->msix_entries field, not the num_msix_vectors field,
which is never cleared.

Change-ID: I0546048477f09fc19e481bd37efa30daae4faa88
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We remove all the MAC filters, so remove the VLAN filters, too.

Change-ID: I4f7559acdf005dc3f359bf6460ce32d183c8878b
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the kernel watchdog bites us, ask the PF to reset us and attempt to
reinit the driver.

Change-ID: Ic97665aeeed71ce712b9c4f057e78ff8372522b9
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The error pointer passed to xfrm_state_clone() is unchecked,
so remove it and indicate an error by returning a null pointer.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

This patch fixes commit d3623099 ("ipsec: add support of limited SA dump").

sadb_ext_min_len array should be updated with the new type (SADB_X_EXT_FILTER).
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>