Hardware doesn't seem to work correctly, just block userspace in this case.

v2: add missing defines

Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=85320Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

pci config reset is a low level reset that resets
the entire chip from the bus interface.  It can
be more reliable if soft reset fails.

There's not much information still available on
r6xx, so r6xx is based on guess-work.

v2: put behind module parameter
v3: add IGP check
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I keep making that one, so checked if I was the only one. Apparently
not.

Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.

Start restructuring the code by separating our the UVD block.

v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows you to look at the current DPM state via
debugfs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds dpm support for rv7xx asics.  This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching

Set radeon.dpm=1 to enable.

v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Stupid copy & paste error over all generations.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: set UVD tiling config for rv730
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

v2: avoid 64bit divide
v3: rv740 uses the evegreen upll configuration
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Just everything needed to decode videos using UVD.

v6: just all the bugfixes and support for R7xx-SI merged in one patch
v7: UVD_CGC_GATE is a write only register, lockup detection fix
v8: split out VRAM fallback changes, remove support for RV770,
    add support for HEMLOCK, add buffer sizes checks
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is required to get the reference clock used
by the gfx engine for things like timestamps. Fixes
support for GL extensions the use timestamps on
certain boards.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Uses the new multi-ring infrastucture.  6xx/7xx has a single
async DMA ring.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- SMX_SAR_CTL0 needs to be programmed correctly to prevent
problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and
simplify render backend map. This now properly sets up the backend map
on r6xx-9xx which should improve 3D performance.

Vadim benchmarked also:
Some benchmarks on juniper (5750), fullscreen 1920x1080,
first result - kernel 3.4.0+ (fb21affa), second - with these patches:

Lightsmark:   91 fps => 123 fps    +35%
Doom3:        74 fps => 101 fps    +36%
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Need to program an additional VM register.  This doesn't not currently
cause any problems, but allows us to program the proper backend
map in a subsequent patch which should improve performance on these
asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

agd5f: minor cleanups
Signed-off-by: NCédric Cano <ccano@interfaceconcept.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Supported on rv6xx/r7xx/evergreen.  Cards come up in gen1 mode.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- CONFIG_MEMSIZE is in bytes on fusion.
- FB_BASE and FB_TOP are finer grained.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Should improve performance slightly and possibly fix some
issues.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds support for dri2 pageflipping.

v2: precision updates from Mario Kleiner.
v3: Multihead fixes from Mario Kleiner; missing crtc offset
    add note about update pending bit on pre-avivo chips
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NMario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds initial Evergreen KMS support, it doesn't include
any acceleration features or interrupt handling yet.

Major changes are DCE4 handling for PLLs for the > 2 crtcs.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds the r600 KMS + CS support to the Linux kernel.

The r600 TTM support is quite basic and still needs more
work esp around using interrupts, but the polled fencing
should work okay for now.

Also currently TTM is using memcpy to do VRAM moves,
the code is here to use a 3D blit to do this, but
isn't fully debugged yet.

Authors:
Alex Deucher <alexdeucher@gmail.com>
Dave Airlie <airlied@redhat.com>
Jerome Glisse <jglisse@redhat.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>