- 09 5月, 2013 7 次提交
-
-
由 Douglas Leung 提交于
Support vdso in microMIPS mode. Signed-off-by: NDouglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Leonid Yegoshin 提交于
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
-
由 Steven J. Hill 提交于
The macros did not properly take into account the ISA that the kernel was being compiled with. A classic MIPS kernel will have the standard 'uasm_i_##op' macro functions with 'MM_uasm_i_##op' macro functions for the microMIPS version. A pure microMIPS kernel will have the standard macros with 'CL_uasm_i_##op' macro functions for the classic version. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Jump or branch target addresses have the first bit set. The original mask did not take this into account and will cause a field overflow warning for the target address when a jump immediate instruction is built. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
- 08 5月, 2013 9 次提交
-
-
由 Steven J. Hill 提交于
Changes for pure microMIPS cores to dynamically determine the ASID size at boot time. Includes bug fix https://patchwork.linux-mips.org/patch/5230/Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NJonas Gorski <jogo@openwrt.org>
-
由 Steven J. Hill 提交于
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Steven J. Hill 提交于
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of all inclusions of it by Malta and SEAD-3 platforms. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: ar7 powertv build"]. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: unbreak powertv build"]. [ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...] Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Remove old YAMON prom code and use common firmware library code. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Remove old YAMON prom code and use common firmware library code. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Add parsing of the environment and command line variables passed to the kernel to the firmware library. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Add declaration of 'mips_scroll_message' and 'mips_display_message' to the common generic header file for the MIPS Technologies Inc. development boards. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Lars-Peter Clausen 提交于
Setting the LED_CORE_SUSPENDRESUME flag causes the LED driver core to call led_classdev_suspend/led_classdev_resume during suspend/resume. Since this is exactly what the driver's custom suspend/resume callbacks do we can replace them by setting the LED_CORE_SUSPENDRESUME flag. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
- 02 5月, 2013 6 次提交
-
-
由 Steven J. Hill 提交于
Some MIPS controllers have hardware I/O coherency. This patch detects those and turns off software coherency. A new kernel command line option also allows the user to manually turn software coherency on or off. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Add in new Malta config files for SMVP, SMTC, and APRP. Also update the original 'malta_defconfig' config file. Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
-
由 Steven J. Hill 提交于
Add two new macros for microMIPS. One checks if an exception was taken in either microMIPS or classic MIPS mode. The other checks if a microMIPS instruction is 16-bit or 32-bit in length. [ralf@linux-mips.org: Removed unnecessary parenthesis as noted by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>] Signed-off-by: NSteven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: kevink@paralogos.com Cc: ddaney.cavm@gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Patchwork: https://patchwork.linux-mips.org/patch/4924/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> (cherry picked from commit 49df26472338b935fd5781bf94a77a88b148a716)
-
由 Steven J. Hill 提交于
Add new file 'uasm-micromips.c' that allows the micro assembler to generate microMIPS ISA code. It can be included in the kernel alongside the classic ISA as long as the platform supports the microMIPS ISA. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: kevink@paralogos.com Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/4923/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> (cherry picked from commit 5f011a866afbd03a5379f67f4e70e5efbdfc16e9)
-
由 Steven J. Hill 提交于
Split 'uasm.c' into two files. The new file 'uasm-mips.c' has the functions specific to the classic MIPS ISA. The 'uasm.c' file contains common code that can be used by classic or other ISAs that could be supported by the kernel. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: kevink@paralogos.com Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/4922/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> (cherry picked from commit 0961103562ab958fa74f35043bf4f72e51ed6155)
-
由 Steven J. Hill 提交于
Add structures for all the microMIPS instructions. Also add the enumerations for all the bit fields for opcodes, functions, etc. Signed-off-by: NSteven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: kevink@paralogos.com Cc: ddaney.cavm@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/4921/Signed-off-by: NRalf Baechle <ralf@linux-mips.org> (cherry picked from commit d7f19e43a4337d4d40ff5e241172912130d06a4c)
-
- 15 4月, 2013 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set x86/mm/cpa/selftest: Fix false positive in CPA self test x86/mm/cpa: Convert noop to functional fix x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Misc fixlets" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix accounting on multi-threaded processes sched/debug: Fix sd->*_idx limit range avoiding overflow sched_clock: Prevent 64bit inatomicity on 32bit systems sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix error return code ftrace: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, always make sure it's NUL terminated perf: Fix ring_buffer perf_output_space() boundary calculation perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "One fix for a hotplug locking regressions, and one fix for an oops if you unplug the monitor at an inopportune moment on the udl device." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event udl: handle EDID failure properly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu fix from Greg Ungerer: "This contains only a single compilation fix for ColdFire m68k targets that use local non-GPIOLIB support." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: define a local gpio_request_one() function
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fix from Wim Van Sebroeck: "It will fix compile errors for the at91rm9200_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: Revert the AT91RM9200_WATCHDOG dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull one more btrfs fix from Chris Mason: "This has a recent fix from Josef for our tree log replay code. It fixes problems where the inode counter for the number of bytes in the file wasn't getting updated properly during fsync replay. The commit did get rebased this morning, but it was only to clean up the subject line. The code hasn't changed." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: make sure nbytes are right after log replay
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "Namhyung Kim found and fixed a bug that can crash the kernel by simply doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid Luckily, this can only be done by root, but still is a nasty bug." * tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section tracing: Fix possible NULL pointer dereferences
-
由 Linus Torvalds 提交于
Nothing is using it yet, but this will allow us to delay the open-time checks to use time, without breaking the normal UNIX permission semantics where permissions are determined by the opener (and the file descriptor can then be passed to a different process, or the process can drop capabilities). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 4月, 2013 3 次提交
-
-
由 Nicolas Ferre 提交于
Compiling the at91rm9200_wdt.c driver without at91rm9200 support was leading to several errors: drivers/built-in.o: In function `at91_wdt_close': at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_write': at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_shutdown': at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_suspend': at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_open': at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base' drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to `at91_st_base' follow So, reverting the modification of the "depends" Kconfig line introduced by patch a6a1bcd3 (watchdog: at91rm9200: add DT support) seems to be the good solution. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Suleiman Souhlal 提交于
Revert commit 62a3ddef ("vfs: fix spinning prevention in prune_icache_sb"). This commit doesn't look right: since we are looking at the tail of the list (sb->s_inode_lru.prev) if we want to skip an inode, we should put it back at the head of the list instead of the tail, otherwise we will keep spinning on it. Discovered when investigating why prune_icache_sb came top in perf reports of a swapping load. Signed-off-by: NSuleiman Souhlal <suleiman@google.com> Signed-off-by: NHugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Anatol Pomozov identified a race condition that hits module unloading and re-loading. To quote Anatol: "This is a race codition that exists between kset_find_obj() and kobject_put(). kset_find_obj() might return kobject that has refcount equal to 0 if this kobject is freeing by kobject_put() in other thread. Here is timeline for the crash in case if kset_find_obj() searches for an object tht nobody holds and other thread is doing kobject_put() on the same kobject: THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put()) splin_lock() atomic_dec_return(kobj->kref), counter gets zero here ... starts kobject cleanup .... spin_lock() // WAIT thread A in kobj_kset_leave() iterate over kset->list atomic_inc(kobj->kref) (counter becomes 1) spin_unlock() spin_lock() // taken // it does not know that thread A increased counter so it remove obj from list spin_unlock() vfree(module) // frees module object with containing kobj // kobj points to freed memory area!! kobject_put(kobj) // OOPS!!!! The race above happens because module.c tries to use kset_find_obj() when somebody unloads module. The module.c code was introduced in commit 6494a93d" Anatol supplied a patch specific for module.c that worked around the problem by simply not using kset_find_obj() at all, but rather than make a local band-aid, this just fixes kset_find_obj() to be thread-safe using the proper model of refusing the get a new reference if the refcount has already dropped to zero. See examples of this proper refcount handling not only in the kref documentation, but in various other equivalent uses of this pattern by grepping for atomic_inc_not_zero(). [ Side note: the module race does indicate that module loading and unloading is not properly serialized wrt sysfs information using the module mutex. That may require further thought, but this is the correct fix at the kobject layer regardless. ] Reported-analyzed-and-tested-by: NAnatol Pomozov <anatol.pomozov@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 4月, 2013 5 次提交
-
-
由 Josef Bacik 提交于
While trying to track down a tree log replay bug I noticed that fsck was always complaining about nbytes not being right for our fsynced file. That is because the new fsync stuff doesn't wait for ordered extents to complete, so the inodes nbytes are not necessarily updated properly when we log it. So to fix this we need to set nbytes to whatever it is on the inode that is on disk, so when we replay the extents we can just add the bytes that are being added as we replay the extent. This makes it work for the case that we have the wrong nbytes or the case that we logged everything and nbytes is actually correct. With this I'm no longer getting nbytes errors out of btrfsck. Cc: stable@vger.kernel.org Signed-off-by: NJosef Bacik <jbacik@fusionio.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
由 Dave Hansen 提交于
This patch attempts to fix: https://bugzilla.kernel.org/show_bug.cgi?id=56461 The symptom is a crash and messages like this: chrome: Corrupted page table at address 34a03000 *pdpt = 0000000000000000 *pde = 0000000000000000 Bad pagetable: 000f [#1] PREEMPT SMP Ingo guesses this got introduced by commit 611ae8e3 ("x86/tlb: enable tlb flush range support for x86") since that code started to free unused pagetables. On x86-32 PAE kernels, that new code has the potential to free an entire PMD page and will clear one of the four page-directory-pointer-table (aka pgd_t entries). The hardware aggressively "caches" these top-level entries and invlpg does not actually affect the CPU's copy. If we clear one we *HAVE* to do a full TLB flush, otherwise we might continue using a freed pmd page. (note, we do this properly on the population side in pud_populate()). This patch tracks whenever we clear one of these entries in the 'struct mmu_gather', and ensures that we follow up with a full tlb flush. BTW, I disassembled and checked that: if (tlb->fullmm == 0) and if (!tlb->fullmm && !tlb->need_flush_all) generate essentially the same code, so there should be zero impact there to the !PAE case. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Artem S Tashkinov <t.artem@mailcity.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are remaining target-pending items for v3.9-rc7 code. The tcm_vhost patches are more than I'd usually include in a -rc7 pull, but are changes required for v3.9 to work correctly with the pending vhost-scsi-pci QEMU upstream series merge. (Paolo CC'ed) Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for managing vhost-scsi endpoints has gotten alot of review + testing over the past weeks, and MST has ACKed the full series. Also, there is a target patch to fix a long-standing bug within control CDB handling with Standby/Offline/Transition ALUA port access states, that had been incorrectly rejecting the control CDBs required for LUN scan to work during these port group states. CC'ing to stable." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs tcm_vhost: Send bad target to guest when cmd fails tcm_vhost: Add vhost_scsi_send_bad_target() helper tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq tcm_vhost: Remove double check of response tcm_vhost: Initialize vq->last_used_idx when set endpoint tcm_vhost: Use vq->private_data to indicate if the endpoint is setup tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a set of ten bug fixes (and two consisting of copyright year update and version number change) pretty much all of which involve either a crash or a hang except the removal of the random sleep from the qla2xxx driver (which is a coding error so bad, we want it gone before anyone has a chance to copy it)." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put() [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy() [SCSI] ibmvscsi: Fix slave_configure deadlock [SCSI] qla2xxx: Update the driver version to 8.04.00.13-k. [SCSI] qla2xxx: Remove debug code that msleeps for random duration. [SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file. [SCSI] qla2xxx: Fix crash during firmware dump procedure. [SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application." [SCSI] ipr: dlpar failed when adding an adapter back [SCSI] ipr: fix addition of abort command to HRRQ free queue [SCSI] st: Take additional queue ref in st_probe [SCSI] libsas: use right function to alloc smp response [SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fix from Steve French: "Fixes a regression in cifs in which a password which begins with a comma is parsed incorrectly as a blank password" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: Allow passwords which begin with a delimitor
-