提交 f9b41929 编写于 作者: A Akinobu Mita 提交者: Linus Torvalds

[PATCH] bitops: hweight() speedup

<linux@horizon.com> wrote:

This is an extremely well-known technique.  You can see a similar version that
uses a multiply for the last few steps at
http://graphics.stanford.edu/~seander/bithacks.html#CountBitsSetParallel whch
refers to "Software Optimization Guide for AMD Athlon 64 and Opteron
Processors"
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25112.PDF

It's section 8.6, "Efficient Implementation of Population-Count Function in
32-bit Mode", pages 179-180.

It uses the name that I am more familiar with, "popcount" (population count),
although "Hamming weight" also makes sense.

Anyway, the proof of correctness proceeds as follows:

	b = a - ((a >> 1) & 0x55555555);
	c = (b & 0x33333333) + ((b >> 2) & 0x33333333);
	d = (c + (c >> 4)) & 0x0f0f0f0f;
#if SLOW_MULTIPLY
	e = d + (d >> 8)
	f = e + (e >> 16);
	return f & 63;
#else
	/* Useful if multiply takes at most 4 cycles */
	return (d * 0x01010101) >> 24;
#endif

The input value a can be thought of as 32 1-bit fields each holding their own
hamming weight.  Now look at it as 16 2-bit fields.  Each 2-bit field a1..a0
has the value 2*a1 + a0.  This can be converted into the hamming weight of the
2-bit field a1+a0 by subtracting a1.

That's what the (a >> 1) & mask subtraction does.  Since there can be no
borrows, you can just do it all at once.

Enumerating the 4 possible cases:

0b00 = 0  ->  0 - 0 = 0
0b01 = 1  ->  1 - 0 = 1
0b10 = 2  ->  2 - 1 = 1
0b11 = 3  ->  3 - 1 = 2

The next step consists of breaking up b (made of 16 2-bir fields) into
even and odd halves and adding them into 4-bit fields.  Since the largest
possible sum is 2+2 = 4, which will not fit into a 4-bit field, the 2-bit
                           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                          "which will not fit into a 2-bit field"

fields have to be masked before they are added.

After this point, the masking can be delayed.  Each 4-bit field holds a
population count from 0..4, taking at most 3 bits.  These numbers can be added
without overflowing a 4-bit field, so we can compute c + (c >> 4), and only
then mask off the unwanted bits.

This produces d, a number of 4 8-bit fields, each in the range 0..8.  From
this point, we can shift and add d multiple times without overflowing an 8-bit
field, and only do a final mask at the end.

The number to mask with has to be at least 63 (so that 32 on't be truncated),
but can also be 128 or 255.  The x86 has a special encoding for signed
immediate byte values -128..127, so the value of 255 is slower.  On other
processors, a special "sign extend byte" instruction might be faster.

On a processor with fast integer multiplies (Athlon but not P4), you can
reduce the final few serially dependent instructions to a single integer
multiply.  Consider d to be 3 8-bit values d3, d2, d1 and d0, each in the
range 0..8.  The multiply forms the partial products:

	           d3 d2 d1 d0
	        d3 d2 d1 d0
	     d3 d2 d1 d0
	+ d3 d2 d1 d0
	----------------------
	           e3 e2 e1 e0

Where e3 = d3 + d2 + d1 + d0.   e2, e1 and e0 obviously cannot generate
any carries.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 37d54111
......@@ -10,28 +10,28 @@
unsigned int hweight32(unsigned int w)
{
unsigned int res = (w & 0x55555555) + ((w >> 1) & 0x55555555);
unsigned int res = w - ((w >> 1) & 0x55555555);
res = (res & 0x33333333) + ((res >> 2) & 0x33333333);
res = (res & 0x0F0F0F0F) + ((res >> 4) & 0x0F0F0F0F);
res = (res & 0x00FF00FF) + ((res >> 8) & 0x00FF00FF);
return (res & 0x0000FFFF) + ((res >> 16) & 0x0000FFFF);
res = (res + (res >> 4)) & 0x0F0F0F0F;
res = res + (res >> 8);
return (res + (res >> 16)) & 0x000000FF;
}
EXPORT_SYMBOL(hweight32);
unsigned int hweight16(unsigned int w)
{
unsigned int res = (w & 0x5555) + ((w >> 1) & 0x5555);
unsigned int res = w - ((w >> 1) & 0x5555);
res = (res & 0x3333) + ((res >> 2) & 0x3333);
res = (res & 0x0F0F) + ((res >> 4) & 0x0F0F);
return (res & 0x00FF) + ((res >> 8) & 0x00FF);
res = (res + (res >> 4)) & 0x0F0F;
return (res + (res >> 8)) & 0x00FF;
}
EXPORT_SYMBOL(hweight16);
unsigned int hweight8(unsigned int w)
{
unsigned int res = (w & 0x55) + ((w >> 1) & 0x55);
unsigned int res = w - ((w >> 1) & 0x55);
res = (res & 0x33) + ((res >> 2) & 0x33);
return (res & 0x0F) + ((res >> 4) & 0x0F);
return (res + (res >> 4)) & 0x0F;
}
EXPORT_SYMBOL(hweight8);
......@@ -40,13 +40,12 @@ unsigned long hweight64(__u64 w)
#if BITS_PER_LONG == 32
return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
#elif BITS_PER_LONG == 64
u64 res;
res = (w & 0x5555555555555555ul) + ((w >> 1) & 0x5555555555555555ul);
__u64 res = w - ((w >> 1) & 0x5555555555555555ul);
res = (res & 0x3333333333333333ul) + ((res >> 2) & 0x3333333333333333ul);
res = (res & 0x0F0F0F0F0F0F0F0Ful) + ((res >> 4) & 0x0F0F0F0F0F0F0F0Ful);
res = (res & 0x00FF00FF00FF00FFul) + ((res >> 8) & 0x00FF00FF00FF00FFul);
res = (res & 0x0000FFFF0000FFFFul) + ((res >> 16) & 0x0000FFFF0000FFFFul);
return (res & 0x00000000FFFFFFFFul) + ((res >> 32) & 0x00000000FFFFFFFFul);
res = (res + (res >> 4)) & 0x0F0F0F0F0F0F0F0Ful;
res = res + (res >> 8);
res = res + (res >> 16);
return (res + (res >> 32)) & 0x00000000000000FFul;
#else
#error BITS_PER_LONG not defined
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册