提交 f6e9456c 编写于 作者: R Robert Richter 提交者: H. Peter Anvin

x86, cleanup: Remove obsolete boot_cpu_id variable

boot_cpu_id is there for historical reasons and was renamed to
boot_cpu_physical_apicid in patch:

 c70dcb74 x86: change boot_cpu_id to boot_cpu_physical_apicid

However, there are some remaining occurrences of boot_cpu_id that are
never touched in the kernel and thus its value is always 0.

This patch removes boot_cpu_id completely.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
LKML-Reference: <1279731838-1522-8-git-send-email-robert.richter@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
上级 ad41a1e0
......@@ -54,7 +54,6 @@ extern struct clock_event_device *global_clock_event;
extern unsigned long apbt_quick_calibrate(void);
extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
extern void apbt_setup_secondary_clock(void);
extern unsigned int boot_cpu_id;
extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
......
......@@ -32,6 +32,5 @@ extern void arch_unregister_cpu(int);
DECLARE_PER_CPU(int, cpu_state);
extern unsigned int boot_cpu_id;
#endif /* _ASM_X86_CPU_H */
......@@ -343,7 +343,7 @@ void apbt_setup_secondary_clock(void)
/* Don't register boot CPU clockevent */
cpu = smp_processor_id();
if (cpu == boot_cpu_id)
if (!cpu)
return;
/*
* We need to calculate the scaled math multiplication factor for
......
......@@ -162,7 +162,7 @@ int __init arch_early_irq_init(void)
cfg = irq_cfgx;
count = ARRAY_SIZE(irq_cfgx);
node= cpu_to_node(boot_cpu_id);
node = cpu_to_node(0);
for (i = 0; i < count; i++) {
desc = irq_to_desc(i);
......@@ -1483,7 +1483,7 @@ static void __init setup_IO_APIC_irqs(void)
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
int node = cpu_to_node(boot_cpu_id);
int node = cpu_to_node(0);
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
......@@ -1548,7 +1548,7 @@ static void __init setup_IO_APIC_irqs(void)
void setup_IO_APIC_irq_extra(u32 gsi)
{
int apic_id = 0, pin, idx, irq;
int node = cpu_to_node(boot_cpu_id);
int node = cpu_to_node(0);
struct irq_desc *desc;
struct irq_cfg *cfg;
......@@ -2925,7 +2925,7 @@ static inline void __init check_timer(void)
{
struct irq_desc *desc = irq_to_desc(0);
struct irq_cfg *cfg = desc->chip_data;
int node = cpu_to_node(boot_cpu_id);
int node = cpu_to_node(0);
int apic1, pin1, apic2, pin2;
unsigned long flags;
int no_pin1 = 0;
......@@ -3279,7 +3279,7 @@ unsigned int create_irq_nr(unsigned int irq_want, int node)
int create_irq(void)
{
int node = cpu_to_node(boot_cpu_id);
int node = cpu_to_node(0);
unsigned int irq_want;
int irq;
......@@ -3901,7 +3901,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
if (dev)
node = dev_to_node(dev);
else
node = cpu_to_node(boot_cpu_id);
node = cpu_to_node(0);
desc = irq_to_desc_alloc_node(irq, node);
if (!desc) {
......
......@@ -148,7 +148,7 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
/* calling is from identify_secondary_cpu() ? */
if (c->cpu_index == boot_cpu_id)
if (!c->cpu_index)
return;
/*
......
......@@ -665,7 +665,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
this_cpu->c_early_init(c);
#ifdef CONFIG_SMP
c->cpu_index = boot_cpu_id;
c->cpu_index = 0;
#endif
filter_cpuid_features(c, false);
}
......
......@@ -169,7 +169,7 @@ static void __cpuinit intel_smp_check(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
/* calling is from identify_secondary_cpu() ? */
if (c->cpu_index == boot_cpu_id)
if (!c->cpu_index)
return;
/*
......
......@@ -84,7 +84,7 @@ static int __init reboot_setup(char *str)
}
/* we will leave sorting out the final value
when we are ready to reboot, since we might not
have set up boot_cpu_id or smp_num_cpu */
have detected BSP APIC ID or smp_num_cpu */
break;
#endif /* CONFIG_SMP */
......
......@@ -125,7 +125,6 @@ unsigned long max_pfn_mapped;
RESERVE_BRK(dmi_alloc, 65536);
#endif
unsigned int boot_cpu_id __read_mostly;
static __initdata unsigned long _brk_start = (unsigned long)__brk_base;
unsigned long _brk_end = (unsigned long)__brk_base;
......
......@@ -253,7 +253,7 @@ void __init setup_per_cpu_areas(void)
* Up to this point, the boot CPU has been using .init.data
* area. Reload any changed state for the boot CPU.
*/
if (cpu == boot_cpu_id)
if (!cpu)
switch_to_new_gdt(cpu);
}
......
......@@ -54,8 +54,8 @@ static __init int find_northbridge(void)
static __init void early_get_boot_cpu_id(void)
{
/*
* need to get boot_cpu_id so can use that to create apicid_to_node
* in k8_scan_nodes()
* need to get the APIC ID of the BSP so can use that to
* create apicid_to_node in k8_scan_nodes()
*/
#ifdef CONFIG_X86_MPPARSE
/*
......@@ -212,7 +212,7 @@ int __init k8_scan_nodes(void)
bits = boot_cpu_data.x86_coreid_bits;
cores = (1<<bits);
apicid_base = 0;
/* need to get boot_cpu_id early for system with apicid lifting */
/* get the APIC ID of the BSP early for systems with apicid lifting */
early_get_boot_cpu_id();
if (boot_cpu_physical_apicid > 0) {
pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册