Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 f45f06b6 编写于 作者: H Hans de Goede 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB (8833): gspca: Cleanup the sonixb code. 

-the usb-id table caried several flags which were not usb-id specific but
 sensor specific, add a sensor_data array and move these flag there
-fr_h_sz was being abused to store and check which bridge was being used
 instead add a bridge member to the sd struct
-now that we have a sensor_data table use that to store pointers to
 init_sequences instead of using switch cases on sd->sensor
Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 20122542
隐藏空白更改
内联 并排
Showing with 162 addition and 203 deletion
drivers/media/video/gspca/sonixb.c
浏览文件 @ f45f06b6
......@@ -41,8 +41,12 @@ struct sd {
unsigned char frames_to_drop;
unsigned char freq; /* light freq filter setting */
unsigned char fr_h_sz; /* size of frame header */
char sensor; /* Type of image sensor chip */
__u8 bridge; /* Type of bridge */
#define BRIDGE_101 0
#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
#define BRIDGE_103 1
__u8 sensor; /* Type of image sensor chip */
#define SENSOR_HV7131R 0
#define SENSOR_OV6650 1
#define SENSOR_OV7630 2
......@@ -50,15 +54,31 @@ struct sd {
#define SENSOR_PAS202 4
#define SENSOR_TAS5110 5
#define SENSOR_TAS5130CXX 6
char sensor_has_gain;
__u8 sensor_addr;
__u8 reg11;
};
/* flags used in the device id table */
typedef const __u8 sensor_init_t[8];
struct sensor_data {
const __u8 *bridge_init[2];
int bridge_init_size[2];
sensor_init_t *sensor_init;
int sensor_init_size;
sensor_init_t *sensor_bridge_init[2];
int sensor_bridge_init_size[2];
int flags;
unsigned ctrl_dis;
__u8 sensor_addr;
};
/* sensor_data flags */
#define F_GAIN 0x01 /* has gain */
#define F_SIF 0x02 /* sif or vga */
#define F_H18 0x04 /* long (18 b) or short (12 b) frame header */
/* ctrl_dis helper macros */
#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
#define NO_FREQ (1 << FREQ_IDX)
#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
#define COMP2 0x8f
#define COMP 0xc7 /* 0x87 //0x07 */
......@@ -69,6 +89,18 @@ struct sd {
#define SYS_CLK 0x04
#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
sensor_3, _flags, _ctrl_dis, _sensor_addr) \
{ \
.bridge_init = { bridge_1, bridge_3 }, \
.bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
.sensor_init = sensor, \
.sensor_init_size = sizeof(sensor), \
.sensor_bridge_init = { sensor_1, sensor_3,}, \
.sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
.flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
}
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being transmitted, and a frame is
being captured with the old settings. So if we adjust the autogain we must
......@@ -219,7 +251,7 @@ static const __u8 hv7131_sensor_init[][8] = {
static const __u8 initOv6650[] = {
0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
};
static const __u8 ov6650_sensor_init[][8] =
......@@ -260,7 +292,7 @@ static const __u8 initOv7630[] = {
0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */
0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */
0x28, 0x1e, /* H & V sizes r15 .. r16 */
0x68, COMP1, MCK_INIT1, /* r17 .. r19 */
0x68, COMP2, MCK_INIT1, /* r17 .. r19 */
0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */
};
static const __u8 initOv7630_3[] = {
......@@ -295,47 +327,65 @@ static const __u8 ov7630_sensor_init[][8] = {
{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
};
static const __u8 ov7630_sensor_init_3[][8] = {
{0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10},
};
static const __u8 initPas106[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
0x16, 0x12, 0x28, COMP1, MCK_INIT1,
0x16, 0x12, 0x24, COMP1, MCK_INIT1,
0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
};
/* compression 0x86 mckinit1 0x2b */
static const __u8 pas106_data[][2] = {
{0x02, 0x04}, /* Pixel Clock Divider 6 */
{0x03, 0x13}, /* Frame Time MSB */
/* {0x03, 0x12}, * Frame Time MSB */
{0x04, 0x06}, /* Frame Time LSB */
/* {0x04, 0x05}, * Frame Time LSB */
{0x05, 0x65}, /* Shutter Time Line Offset */
/* {0x05, 0x6d}, * Shutter Time Line Offset */
/* {0x06, 0xb1}, * Shutter Time Pixel Offset */
{0x06, 0xcd}, /* Shutter Time Pixel Offset */
{0x07, 0xc1}, /* Black Level Subtract Sign */
/* {0x07, 0x00}, * Black Level Subtract Sign */
{0x08, 0x06}, /* Black Level Subtract Level */
{0x08, 0x06}, /* Black Level Subtract Level */
/* {0x08, 0x01}, * Black Level Subtract Level */
{0x09, 0x05}, /* Color Gain B Pixel 5 a */
{0x0a, 0x04}, /* Color Gain G1 Pixel 1 5 */
{0x0b, 0x04}, /* Color Gain G2 Pixel 1 0 5 */
{0x0c, 0x05}, /* Color Gain R Pixel 3 1 */
{0x0d, 0x00}, /* Color GainH Pixel */
{0x0e, 0x0e}, /* Global Gain */
{0x0f, 0x00}, /* Contrast */
{0x10, 0x06}, /* H&V synchro polarity */
{0x11, 0x06}, /* ?default */
{0x12, 0x06}, /* DAC scale */
{0x14, 0x02}, /* ?default */
{0x13, 0x01}, /* Validate Settings */
static const __u8 pas106_sensor_init[][8] = {
/* Pixel Clock Divider 6 */
{ 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
/* Frame Time MSB (also seen as 0x12) */
{ 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
/* Frame Time LSB (also seen as 0x05) */
{ 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
/* Shutter Time Line Offset (also seen as 0x6d) */
{ 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
/* Shutter Time Pixel Offset (also seen as 0xb1) */
{ 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
/* Black Level Subtract Sign (also seen 0x00) */
{ 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
/* Black Level Subtract Level (also seen 0x01) */
{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
/* Color Gain B Pixel 5 a */
{ 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
/* Color Gain G1 Pixel 1 5 */
{ 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
/* Color Gain G2 Pixel 1 0 5 */
{ 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
/* Color Gain R Pixel 3 1 */
{ 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
/* Color GainH Pixel */
{ 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
/* Global Gain */
{ 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
/* Contrast */
{ 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
/* H&V synchro polarity */
{ 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
/* ?default */
{ 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
/* DAC scale */
{ 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
/* ?default */
{ 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
/* Validate Settings */
{ 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
};
static const __u8 initPas202[] = {
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00, 0x00, 0x07, 0x03, 0x0a, /* 6 */
0x28, 0x1e, 0x28, 0x89, 0x30,
0x28, 0x1e, 0x28, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
static const __u8 pas202_sensor_init[][8] = {
......@@ -390,6 +440,21 @@ static const __u8 tas5130_sensor_init[][8] = {
{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
};
struct sensor_data sensor_data[] = {
SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
F_GAIN, 0, 0x21),
SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
0),
SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
NO_EXPO|NO_FREQ, 0),
SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
0),
};
/* get one byte in gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
__u16 value)
......@@ -468,7 +533,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
/* change reg 0x06 */
i2cOV[1] = sd->sensor_addr;
i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
i2cOV[3] = sd->brightness;
if (i2c_w(gspca_dev, i2cOV) < 0)
goto err;
......@@ -555,7 +620,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
i2c[1] = sd->sensor_addr;
i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = gain >> 2;
if (i2c_w(gspca_dev, i2c) < 0)
goto err;
......@@ -582,7 +647,7 @@ static void setgain(struct gspca_dev *gspca_dev)
rgb_value = gain;
reg_w(gspca_dev, 0x11, &rgb_value, 1);
if (sd->sensor_has_gain)
if (sensor_data[sd->sensor].flags & F_GAIN)
setsensorgain(gspca_dev);
}
......@@ -662,7 +727,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
reg10 = reg10_max;
/* Write reg 10 and reg11 low nibble */
i2c[1] = sd->sensor_addr;
i2c[1] = sensor_data[sd->sensor].sensor_addr;
i2c[3] = reg10;
i2c[4] |= reg11 - 1;
......@@ -702,7 +767,7 @@ static void setfreq(struct gspca_dev *gspca_dev)
? 0x4f : 0x8a;
break;
}
i2c[1] = sd->sensor_addr;
i2c[1] = sensor_data[sd->sensor].sensor_addr;
if (i2c_w(gspca_dev, i2c) < 0)
PDEBUG(D_ERR, "i2c error setfreq");
break;
......@@ -735,28 +800,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
int sif = 0;
reg_r(gspca_dev, 0x00);
if (gspca_dev->usb_buf[0] != 0x10)
return -ENODEV;
/* copy the webcam info from the device id */
sd->sensor = (id->driver_info >> 24) & 0xff;
if (id->driver_info & (F_GAIN << 16))
sd->sensor_has_gain = 1;
if (id->driver_info & (F_SIF << 16))
sif = 1;
if (id->driver_info & (F_H18 << 16))
sd->fr_h_sz = 18; /* size of frame header */
else
sd->fr_h_sz = 12;
gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
sd->sensor_addr = id->driver_info & 0xff;
sd->sensor = id->driver_info >> 8;
sd->bridge = id->driver_info & 0xff;
gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
cam = &gspca_dev->cam;
cam->epaddr = 0x01;
if (!sif) {
if (!(sensor_data[sd->sensor].flags & F_SIF)) {
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
} else {
......@@ -785,78 +841,29 @@ static int sd_init(struct gspca_dev *gspca_dev)
return 0;
}
static void pas106_i2cinit(struct gspca_dev *gspca_dev)
{
int i;
const __u8 *data;
__u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
i = ARRAY_SIZE(pas106_data);
data = pas106_data[0];
while (--i >= 0) {
memcpy(&i2c1[2], data, 2);
/* copy 2 bytes from the template */
if (i2c_w(gspca_dev, i2c1) < 0)
PDEBUG(D_ERR, "i2c error pas106");
data += 2;
}
}
/* -- start the camera -- */
static void sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int mode, l = 0x1f;
int mode, l;
const __u8 *sn9c10x;
__u8 reg17_19[3];
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07;
sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
reg17_19[0] = sn9c10x[0x17 - 1];
reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4);
reg17_19[2] = sn9c10x[0x19 - 1];
/* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
case SENSOR_HV7131R:
sn9c10x = initHv7131;
reg17_19[0] = 0x60;
reg17_19[1] = (mode << 4) | 0x8a;
reg17_19[2] = 0x20;
break;
case SENSOR_OV6650:
sn9c10x = initOv6650;
reg17_19[0] = 0x68;
reg17_19[1] = (mode << 4) | 0x8b;
reg17_19[2] = 0x20;
break;
case SENSOR_OV7630:
if (sd->fr_h_sz == 18) { /* SN9C103 */
sn9c10x = initOv7630_3;
l = sizeof initOv7630_3;
} else
sn9c10x = initOv7630;
reg17_19[0] = 0x68;
reg17_19[1] = (mode << 4) | COMP2;
reg17_19[2] = MCK_INIT1;
break;
case SENSOR_PAS106:
sn9c10x = initPas106;
reg17_19[0] = 0x24; /* 0x28 */
reg17_19[1] = (mode << 4) | COMP1;
reg17_19[2] = MCK_INIT1;
break;
case SENSOR_PAS202:
sn9c10x = initPas202;
reg17_19[0] = mode ? 0x24 : 0x20;
reg17_19[1] = (mode << 4) | 0x89;
reg17_19[2] = 0x20;
break;
case SENSOR_TAS5110:
sn9c10x = initTas5110;
reg17_19[0] = 0x60;
reg17_19[1] = (mode << 4) | 0x86;
reg17_19[2] = 0x2b; /* 0xf3; */
break;
default:
/* case SENSOR_TAS5130CXX: */
sn9c10x = initTas5130;
reg17_19[0] = 0x60;
reg17_19[1] = (mode << 4) | COMP;
case SENSOR_TAS5130CXX:
/* probably not mode specific at all most likely the upper
nibble of 0x19 is exposure (clock divider) just as with
the tas5110, we need someone to test this. */
reg17_19[2] = mode ? 0x23 : 0x43;
break;
}
......@@ -867,41 +874,16 @@ static void sd_start(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
/* Set the registers from the template */
reg_w(gspca_dev, 0x01, sn9c10x, l);
switch (sd->sensor) {
case SENSOR_HV7131R:
i2c_w_vector(gspca_dev, hv7131_sensor_init,
sizeof hv7131_sensor_init);
break;
case SENSOR_OV6650:
i2c_w_vector(gspca_dev, ov6650_sensor_init,
sizeof ov6650_sensor_init);
break;
case SENSOR_OV7630:
i2c_w_vector(gspca_dev, ov7630_sensor_init,
sizeof ov7630_sensor_init);
if (sd->fr_h_sz == 18) { /* SN9C103 */
const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
0x00, 0x00, 0x10 };
i2c_w(gspca_dev, i2c);
}
break;
case SENSOR_PAS106:
pas106_i2cinit(gspca_dev);
break;
case SENSOR_PAS202:
i2c_w_vector(gspca_dev, pas202_sensor_init,
sizeof pas202_sensor_init);
break;
case SENSOR_TAS5110:
i2c_w_vector(gspca_dev, tas5110_sensor_init,
sizeof tas5110_sensor_init);
break;
default:
/* case SENSOR_TAS5130CXX: */
i2c_w_vector(gspca_dev, tas5130_sensor_init,
sizeof tas5130_sensor_init);
break;
}
/* Init the sensor */
i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
sensor_data[sd->sensor].sensor_init_size);
if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
i2c_w_vector(gspca_dev,
sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
sensor_data[sd->sensor].sensor_bridge_init_size[
sd->bridge]);
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
/* compression register */
......@@ -937,10 +919,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
static void sd_stopN(struct gspca_dev *gspca_dev)
{
__u8 ByteSend;
ByteSend = 0x09; /* 0X00 */
reg_w(gspca_dev, 0x01, &ByteSend, 1);
sd_init(gspca_dev);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
......@@ -970,15 +949,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
&& data[5 + i] == 0x96) { /* start of frame */
int lum = -1;
int pkt_type = LAST_PACKET;
int fr_h_sz = (sd->bridge == BRIDGE_103) ?
18 : 12;
if (len - i < sd->fr_h_sz) {
if (len - i < fr_h_sz) {
PDEBUG(D_STREAM, "packet too short to"
" get avg brightness");
} else if (sd->fr_h_sz == 12) {
lum = data[i + 8] + (data[i + 9] << 8);
} else {
} else if (sd->bridge == BRIDGE_103) {
lum = data[i + 9] +
(data[i + 10] << 8);
} else {
lum = data[i + 8] + (data[i + 9] << 8);
}
if (lum == 0) {
lum = -1;
......@@ -993,8 +974,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
frame = gspca_frame_add(gspca_dev, pkt_type,
frame, data, 0);
data += i + sd->fr_h_sz;
len -= i + sd->fr_h_sz;
data += i + fr_h_sz;
len -= i + fr_h_sz;
gspca_frame_add(gspca_dev, FIRST_PACKET,
frame, data, len);
return;
......@@ -1143,55 +1124,33 @@ static const struct sd_desc sd_desc = {
};
/* -- module initialisation -- */
#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
.driver_info = (SENSOR_ ## sensor << 24) \
| ((flags) << 16) \
| ((disable_ctrls) << 8) \
| (i2c_addr)
#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
#define NO_FREQ (1 << FREQ_IDX)
#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
#define SB(sensor, bridge) \
.driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
static __devinitdata struct usb_device_id device_table[] = {
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */
SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
#endif
{USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */
SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */
SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */
SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */
SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */
SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
{USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
{USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
#endif
{USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */
SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
{USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */
SFCI(OV7630, F_GAIN, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x608f), /* SN9C103 */
SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */
SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
{USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */
SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
{USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
#endif
{}
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或