提交 f3f9ad0e 编写于 作者: R Ralf Baechle

[MIPS] Sibyte: Fixes for oneshot timer mode.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 faf2782b
......@@ -17,13 +17,11 @@
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
......@@ -45,23 +43,23 @@ static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
void __iomem *cfg, *init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(0, cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, timer_cfg);
__raw_writeq(0, cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
......@@ -73,30 +71,33 @@ static void sibyte_set_mode(enum clock_event_mode mode,
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_init;
unsigned int cnt;
int res;
void __iomem *cfg, *init;
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cnt = __raw_readq(timer_init);
cnt += delta;
__raw_writeq(cnt, timer_init);
res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
return res;
__raw_writeq(delta - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
return 0;
}
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
void __iomem *timer_cfg;
void __iomem *cfg;
unsigned long tmode;
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
else
tmode = 0;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
/* ACK interrupt */
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
____raw_writeq(tmode, cfg);
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
cd->event_handler(cd);
return IRQ_HANDLED;
......@@ -133,7 +134,7 @@ void __cpuinit sb1480_clockevent_init(void)
bcm1480_mask_irq(cpu, irq);
/*
* Map timer interrupt to IP[4] of this cpu
* Map the timer interrupt to IP[4] of this cpu
*/
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
......
......@@ -15,33 +15,19 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* These are routines to set up and handle interrupts from the
* sb1250 general purpose timer 0. We're using the timer as a
* system clock, so we set it up to run at 100 Hz. On every
* interrupt, we update our idea of what the time of day is,
* then call do_timer() in the architecture-independent kernel
* code to do general bookkeeping (e.g. update jiffies, run
* bottom halves, etc.)
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <linux/percpu.h>
#include <asm/irq.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
#define IMR_IP2_VAL K_INT_MAP_I0
#define IMR_IP3_VAL K_INT_MAP_I1
#define IMR_IP4_VAL K_INT_MAP_I2
......@@ -49,32 +35,31 @@
#define SB1250_HPT_NUM 3
#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
/*
* The general purpose timer ticks at 1 Mhz independent if
* The general purpose timer ticks at 1MHz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
void __iomem *cfg, *init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch(mode) {
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(0, cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, timer_cfg);
__raw_writeq(0, cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
......@@ -83,18 +68,16 @@ static void sibyte_set_mode(enum clock_event_mode mode,
}
}
static int
sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
void __iomem *cfg, *init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
__raw_writeq(0, timer_cfg);
__raw_writeq(delta, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
__raw_writeq(delta - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
return 0;
}
......@@ -103,10 +86,17 @@ static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
void __iomem *cfg;
unsigned long tmode;
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
else
tmode = 0;
/* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
____raw_writeq(tmode, cfg);
cd->event_handler(cd);
......@@ -144,7 +134,9 @@ void __cpuinit sb1250_clockevent_init(void)
sb1250_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
/*
* Map the timer interrupt to IP[4] of this cpu
*/
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
(irq << 3)));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册