提交 edc4a67e 编写于 作者: J Jack Morgenstein 提交者: Roland Dreier

mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow

Commit 096335b3 ("mlx4_core: Allow dynamic MTU configuration for
IB ports") modifies the port VL setting.  This exposes a bug in
mlx4_common_set_port(), where the VL cap value passed in (inside the
command mailbox) is incorrectly zeroed-out:

mlx4_SET_PORT modifies the VL_cap field (byte 3 of the mailbox).
Since the SET_PORT command is paravirtualized on the master as well as
on the slaves, mlx4_SET_PORT_wrapper() is invoked on the master.  This
calls mlx4_common_set_port() where mailbox byte 3 gets overwritten by
code which should only set a single bit in that byte (for the reset
qkey counter flag) -- but instead overwrites the entire byte.

The result is that when running in SR-IOV mode, the VL_cap will be set
to zero -- fix this.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
上级 3aac6ff1
......@@ -697,10 +697,10 @@ static int mlx4_common_set_port(struct mlx4_dev *dev, int slave, u32 in_mod,
if (slave != dev->caps.function)
memset(inbox->buf, 0, 256);
if (dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
*(u8 *) inbox->buf = !!reset_qkey_viols << 6;
*(u8 *) inbox->buf |= !!reset_qkey_viols << 6;
((__be32 *) inbox->buf)[2] = agg_cap_mask;
} else {
((u8 *) inbox->buf)[3] = !!reset_qkey_viols;
((u8 *) inbox->buf)[3] |= !!reset_qkey_viols;
((__be32 *) inbox->buf)[1] = agg_cap_mask;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册