ARM: kirkwood: DT board setup for Network Space v2 and parents

This patch adds DT board setup for LaCie Network Space v2 and parents,
based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2
(Max) and Internet Space v2.
Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/Makefile

@@ -36,9 +36,12 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-ib62x0.dtb \
 	kirkwood-iconnect.dtb \
 	kirkwood-iomega_ix2_200.dtb \
+	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
+	kirkwood-ns2.dtb \
+	kirkwood-ns2max.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \

arch/arm/boot/dts/kirkwood-is2.dts

+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

+/include/ "kirkwood.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <166666667>;
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "at,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power push button";
+			linux,code = <116>;
+			gpios = <&gpio1 0 0>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 0>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-ns2.dts

+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-ns2max.dts

+/dts-v1/;
+
+/include/ "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 1
+			 &gpio0  7 1
+			 &gpio1  1 1
+			 &gpio0 23 1>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 1>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};

arch/arm/mach-kirkwood/Kconfig

@@ -130,6 +130,27 @@ config MACH_KM_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
 
+config MACH_INETSPACE_V2_DT
+	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Internet Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_V2_DT
+	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space v2 NAS, using Flattened Device Tree.
+
+config MACH_NETSPACE_MAX_V2_DT
+	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the LaCie
+	  Network Space Max v2 NAS, using Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help

arch/arm/mach-kirkwood/Makefile

@@ -31,3 +31,6 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
 obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
 obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
+obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o

arch/arm/mach-kirkwood/board-dt.c

@@ -96,6 +96,11 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("keymile,km_kirkwood"))
 		km_kirkwood_init();
 
+	if (of_machine_is_compatible("lacie,inetspace_v2") ||
+	    of_machine_is_compatible("lacie,netspace_v2") ||
+	    of_machine_is_compatible("lacie,netspace_max_v2"))
+		ns2_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table,
 			     kirkwood_auxdata_lookup, NULL);
 }
@@ -112,6 +117,9 @@ static const char *kirkwood_dt_board_compat[] = {
 	"buffalo,lsxl",
 	"iom,ix2-200",
 	"keymile,km_kirkwood",
+	"lacie,inetspace_v2",
+	"lacie,netspace_max_v2",
+	"lacie,netspace_v2",
 	NULL
 };
 

arch/arm/mach-kirkwood/board-ns2.c

+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int ns2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP14_GPIO,		/* USB fuse */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
+	MPP24_GPIO,		/* USB mode select */
+	MPP25_GPIO,		/* Fan rotation fail */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP31_GPIO,		/* Board power off */
+	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
+	0
+};
+
+#define NS2_GPIO_POWER_OFF	31
+
+static void ns2_power_off(void)
+{
+	gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(ns2_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&ns2_ge00_data);
+
+	if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = ns2_power_off;
+	else
+		pr_err("ns2: failed to configure power-off GPIO\n");
+}

arch/arm/mach-kirkwood/common.h

@@ -112,6 +112,14 @@ void km_kirkwood_init(void);
 static inline void km_kirkwood_init(void) {};
 #endif
 
+#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_V2_DT) || \
+	defined(CONFIG_MACH_NETSPACE_MAX_V2_DT)
+void ns2_init(void);
+#else
+static inline void ns2_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);

drivers/leds/Kconfig

@@ -379,7 +379,9 @@ config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
 	depends on LEDS_CLASS
 	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
-		   MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
+		   MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2 || \
+		   MACH_NETSPACE_V2_DT || MACH_INETSPACE_V2_DT || \
+		   MACH_NETSPACE_MAX_V2_DT
 	default y
 	help
 	  This option enable support for the dual-GPIO LED found on the