提交 ec11bb88 编写于 作者: L Luis R. Rodriguez 提交者: John W. Linville

ath9k_hw: correct AR_PHY_SPECTRAL_SCAN register offset

We had 0x9912 but AR_PHY_SPECTRAL_SCAN is 0x9910. By using the
0x9912 we were making the hardware unresponsive. This allows us
to move forward with hardware reset on ar9271 on the ath9k_htc
driver.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 11158472
......@@ -1274,7 +1274,8 @@ static void ath9k_hw_override_ini(struct ath_hw *ah,
* AR9271 1.1
*/
if (AR_SREV_9271_10(ah)) {
val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE;
val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) |
AR_PHY_SPECTRAL_SCAN_ENABLE;
REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val);
}
else if (AR_SREV_9271_11(ah))
......
......@@ -186,8 +186,20 @@ bool ath9k_hw_init_rf(struct ath_hw *ah,
#define AR_PHY_PLL_CTL_44_2133 0xeb
#define AR_PHY_PLL_CTL_40_2133 0xea
#define AR_PHY_SPECTRAL_SCAN 0x9912
#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1
#define AR_PHY_SPECTRAL_SCAN 0x9910 /* AR9280 spectral scan configuration register */
#define AR_PHY_SPECTRAL_SCAN_ENABLE 0x1
#define AR_PHY_SPECTRAL_SCAN_ENA 0x00000001 /* Enable spectral scan, reg 68, bit 0 */
#define AR_PHY_SPECTRAL_SCAN_ENA_S 0 /* Enable spectral scan, reg 68, bit 0 */
#define AR_PHY_SPECTRAL_SCAN_ACTIVE 0x00000002 /* Activate spectral scan reg 68, bit 1*/
#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S 1 /* Activate spectral scan reg 68, bit 1*/
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD 0x000000F0 /* Interval for FFT reports, reg 68, bits 4-7*/
#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S 4
#define AR_PHY_SPECTRAL_SCAN_PERIOD 0x0000FF00 /* Interval for FFT reports, reg 68, bits 8-15*/
#define AR_PHY_SPECTRAL_SCAN_PERIOD_S 8
#define AR_PHY_SPECTRAL_SCAN_COUNT 0x00FF0000 /* Number of reports, reg 68, bits 16-23*/
#define AR_PHY_SPECTRAL_SCAN_COUNT_S 16
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000 /* Short repeat, reg 68, bit 24*/
#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24 /* Short repeat, reg 68, bit 24*/
#define AR_PHY_RX_DELAY 0x9914
#define AR_PHY_SEARCH_START_DELAY 0x9918
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册