提交 eb64e292 编写于 作者: F Felix Fietkau 提交者: David S. Miller

bgmac: leave interrupts disabled as long as there is work to do

Always poll rx and tx during NAPI poll instead of relying on the status
of the first interrupt. This prevents bgmac_poll from leaving unfinished
work around until the next IRQ.
In my tests this makes bridging/routing throughput under heavy load more
stable and ensures that no new IRQs arrive as long as bgmac_poll uses up
the entire budget.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 b38c83dd
......@@ -1109,8 +1109,6 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
bgmac_phy_init(bgmac);
netdev_reset_queue(bgmac->net_dev);
bgmac->int_status = 0;
}
static void bgmac_chip_intrs_on(struct bgmac *bgmac)
......@@ -1225,14 +1223,13 @@ static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
if (!int_status)
return IRQ_NONE;
/* Ack */
bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
int_status &= ~(BGMAC_IS_TX0 | BGMAC_IS_RX);
if (int_status)
bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", int_status);
/* Disable new interrupts until handling existing ones */
bgmac_chip_intrs_off(bgmac);
bgmac->int_status = int_status;
napi_schedule(&bgmac->napi);
return IRQ_HANDLED;
......@@ -1241,25 +1238,17 @@ static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
static int bgmac_poll(struct napi_struct *napi, int weight)
{
struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
struct bgmac_dma_ring *ring;
int handled = 0;
if (bgmac->int_status & BGMAC_IS_TX0) {
ring = &bgmac->tx_ring[0];
bgmac_dma_tx_free(bgmac, ring);
bgmac->int_status &= ~BGMAC_IS_TX0;
}
/* Ack */
bgmac_write(bgmac, BGMAC_INT_STATUS, ~0);
if (bgmac->int_status & BGMAC_IS_RX) {
ring = &bgmac->rx_ring[0];
handled += bgmac_dma_rx_read(bgmac, ring, weight);
bgmac->int_status &= ~BGMAC_IS_RX;
}
bgmac_dma_tx_free(bgmac, &bgmac->tx_ring[0]);
handled += bgmac_dma_rx_read(bgmac, &bgmac->rx_ring[0], weight);
if (bgmac->int_status) {
bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
bgmac->int_status = 0;
}
/* Poll again if more events arrived in the meantime */
if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX))
return handled;
if (handled < weight) {
napi_complete(napi);
......
......@@ -452,7 +452,6 @@ struct bgmac {
/* Int */
u32 int_mask;
u32 int_status;
/* Current MAC state */
int mac_speed;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册