Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - joydev now implements a blacklist to avoid creating joystick nodes
   for accelerometers found in composite devices such as PlaStation
   controllers

 - assorted driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ims-psu - check if CDC union descriptor is sane
  Input: joydev - blacklist ds3/ds4/udraw motion sensors
  Input: allow matching device IDs on property bits
  Input: factor out and export input_device_id matching code
  Input: goodix - poll the 'buffer status' bit before reading data
  Input: axp20x-pek - fix module not auto-loading for axp221 pek
  Input: tca8418 - enable interrupt after it has been requested
  Input: stmfts - fix setting ABS_MT_POSITION_* maximum size
  Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen
  Input: synaptics - disable kernel tracking on SMBus devices

drivers/input/input.c

@@ -933,58 +933,52 @@ int input_set_keycode(struct input_dev *dev,
 }
 EXPORT_SYMBOL(input_set_keycode);
 
+bool input_match_device_id(const struct input_dev *dev,
+			   const struct input_device_id *id)
+{
+	if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
+		if (id->bustype != dev->id.bustype)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
+		if (id->vendor != dev->id.vendor)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
+		if (id->product != dev->id.product)
+			return false;
+
+	if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
+		if (id->version != dev->id.version)
+			return false;
+
+	if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX) ||
+	    !bitmap_subset(id->keybit, dev->keybit, KEY_MAX) ||
+	    !bitmap_subset(id->relbit, dev->relbit, REL_MAX) ||
+	    !bitmap_subset(id->absbit, dev->absbit, ABS_MAX) ||
+	    !bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX) ||
+	    !bitmap_subset(id->ledbit, dev->ledbit, LED_MAX) ||
+	    !bitmap_subset(id->sndbit, dev->sndbit, SND_MAX) ||
+	    !bitmap_subset(id->ffbit, dev->ffbit, FF_MAX) ||
+	    !bitmap_subset(id->swbit, dev->swbit, SW_MAX) ||
+	    !bitmap_subset(id->propbit, dev->propbit, INPUT_PROP_MAX)) {
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(input_match_device_id);
+
 static const struct input_device_id *input_match_device(struct input_handler *handler,
 							struct input_dev *dev)
 {
 	const struct input_device_id *id;
 
 	for (id = handler->id_table; id->flags || id->driver_info; id++) {
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->bustype != dev->id.bustype)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->vendor != dev->id.vendor)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->product != dev->id.product)
-				continue;
-
-		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->version != dev->id.version)
-				continue;
-
-		if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX))
-			continue;
-
-		if (!bitmap_subset(id->keybit, dev->keybit, KEY_MAX))
-			continue;
-
-		if (!bitmap_subset(id->relbit, dev->relbit, REL_MAX))
-			continue;
-
-		if (!bitmap_subset(id->absbit, dev->absbit, ABS_MAX))
-			continue;
-
-		if (!bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX))
-			continue;
-
-		if (!bitmap_subset(id->ledbit, dev->ledbit, LED_MAX))
-			continue;
-
-		if (!bitmap_subset(id->sndbit, dev->sndbit, SND_MAX))
-			continue;
-
-		if (!bitmap_subset(id->ffbit, dev->ffbit, FF_MAX))
-			continue;
-
-		if (!bitmap_subset(id->swbit, dev->swbit, SW_MAX))
-			continue;
-
-		if (!handler->match || handler->match(handler, dev))
+		if (input_match_device_id(dev, id) &&
+		    (!handler->match || handler->match(handler, dev))) {
 			return id;
+		}
 	}
 
 	return NULL;

drivers/input/joydev.c

@@ -747,6 +747,68 @@ static void joydev_cleanup(struct joydev *joydev)
 		input_close_device(handle);
 }
 
+/*
+ * These codes are copied from from hid-ids.h, unfortunately there is no common
+ * usb_ids/bt_ids.h header.
+ */
+#define USB_VENDOR_ID_SONY			0x054c
+#define USB_DEVICE_ID_SONY_PS3_CONTROLLER		0x0268
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER		0x05c4
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_2		0x09cc
+#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE	0x0ba0
+
+#define USB_VENDOR_ID_THQ			0x20d6
+#define USB_DEVICE_ID_THQ_PS3_UDRAW			0xcb17
+
+#define ACCEL_DEV(vnd, prd)						\
+	{								\
+		.flags = INPUT_DEVICE_ID_MATCH_VENDOR |			\
+				INPUT_DEVICE_ID_MATCH_PRODUCT |		\
+				INPUT_DEVICE_ID_MATCH_PROPBIT,		\
+		.vendor = (vnd),					\
+		.product = (prd),					\
+		.propbit = { BIT_MASK(INPUT_PROP_ACCELEROMETER) },	\
+	}
+
+static const struct input_device_id joydev_blacklist[] = {
+	/* Avoid touchpads and touchscreens */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
+	},
+	/* Avoid tablets, digitisers and similar devices */
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+				INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+		.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+	},
+	/* Disable accelerometers on composite devices */
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
+	ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE),
+	ACCEL_DEV(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW),
+	{ /* sentinel */ }
+};
+
+static bool joydev_dev_is_blacklisted(struct input_dev *dev)
+{
+	const struct input_device_id *id;
+
+	for (id = joydev_blacklist; id->flags; id++) {
+		if (input_match_device_id(dev, id)) {
+			dev_dbg(&dev->dev,
+				"joydev: blacklisting '%s'\n", dev->name);
+			return true;
+		}
+	}
+
+	return false;
+}
+
 static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
 {
 	DECLARE_BITMAP(jd_scratch, KEY_CNT);
@@ -807,12 +869,8 @@ static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
 
 static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
 {
-	/* Avoid touchpads and touchscreens */
-	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
-		return false;
-
-	/* Avoid tablets, digitisers and similar devices */
-	if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
+	/* Disable blacklisted devices */
+	if (joydev_dev_is_blacklisted(dev))
 		return false;
 
 	/* Avoid absolute mice */

drivers/input/keyboard/tca8418_keypad.c

@@ -234,14 +234,7 @@ static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
 static int tca8418_configure(struct tca8418_keypad *keypad_data,
 			     u32 rows, u32 cols)
 {
-	int reg, error;
-
-	/* Write config register, if this fails assume device not present */
-	error = tca8418_write_byte(keypad_data, REG_CFG,
-				CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
-	if (error < 0)
-		return -ENODEV;
-
+	int reg, error = 0;
 
 	/* Assemble a mask for row and column registers */
 	reg  =  ~(~0 << rows);
@@ -257,6 +250,12 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data,
 	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
 	error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
 
+	if (error)
+		return error;
+
+	error = tca8418_write_byte(keypad_data, REG_CFG,
+				CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
+
 	return error;
 }
 
@@ -268,6 +267,7 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 	struct input_dev *input;
 	u32 rows = 0, cols = 0;
 	int error, row_shift, max_keys;
+	u8 reg;
 
 	/* Check i2c driver capabilities */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
@@ -301,10 +301,10 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 	keypad_data->client = client;
 	keypad_data->row_shift = row_shift;
 
-	/* Initialize the chip or fail if chip isn't present */
-	error = tca8418_configure(keypad_data, rows, cols);
-	if (error < 0)
-		return error;
+	/* Read key lock register, if this fails assume device not present */
+	error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, &reg);
+	if (error)
+		return -ENODEV;
 
 	/* Configure input device */
 	input = devm_input_allocate_device(dev);
@@ -340,6 +340,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
 		return error;
 	}
 
+	/* Initialize the chip */
+	error = tca8418_configure(keypad_data, rows, cols);
+	if (error < 0)
+		return error;
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(dev, "Unable to register input device, error: %d\n",

drivers/input/misc/axp20x-pek.c

@@ -403,6 +403,7 @@ static const struct platform_device_id axp_pek_id_match[] = {
 	},
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(platform, axp_pek_id_match);
 
 static struct platform_driver axp20x_pek_driver = {
 	.probe		= axp20x_pek_probe,
@@ -417,4 +418,3 @@ module_platform_driver(axp20x_pek_driver);
 MODULE_DESCRIPTION("axp20x Power Button");
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:axp20x-pek");

drivers/input/misc/ims-pcu.c

@@ -1635,13 +1635,25 @@ ims_pcu_get_cdc_union_desc(struct usb_interface *intf)
 		return NULL;
 	}
 
-	while (buflen > 0) {
+	while (buflen >= sizeof(*union_desc)) {
 		union_desc = (struct usb_cdc_union_desc *)buf;
 
+		if (union_desc->bLength > buflen) {
+			dev_err(&intf->dev, "Too large descriptor\n");
+			return NULL;
+		}
+
 		if (union_desc->bDescriptorType == USB_DT_CS_INTERFACE &&
 		    union_desc->bDescriptorSubType == USB_CDC_UNION_TYPE) {
 			dev_dbg(&intf->dev, "Found union header\n");
-			return union_desc;
+
+			if (union_desc->bLength >= sizeof(*union_desc))
+				return union_desc;
+
+			dev_err(&intf->dev,
+				"Union descriptor to short (%d vs %zd\n)",
+				union_desc->bLength, sizeof(*union_desc));
+			return NULL;
 		}
 
 		buflen -= union_desc->bLength;

drivers/input/mouse/synaptics.c

@@ -1709,8 +1709,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 		.sensor_pdata = {
 			.sensor_type = rmi_sensor_touchpad,
 			.axis_align.flip_y = true,
-			/* to prevent cursors jumps: */
-			.kernel_tracking = true,
+			.kernel_tracking = false,
 			.topbuttonpad = topbuttonpad,
 		},
 		.f30_data = {

drivers/input/touchscreen/goodix.c

@@ -72,6 +72,9 @@ struct goodix_ts_data {
 #define GOODIX_REG_CONFIG_DATA		0x8047
 #define GOODIX_REG_ID			0x8140
 
+#define GOODIX_BUFFER_STATUS_READY	BIT(7)
+#define GOODIX_BUFFER_STATUS_TIMEOUT	20
+
 #define RESOLUTION_LOC		1
 #define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
@@ -195,35 +198,53 @@ static int goodix_get_cfg_len(u16 id)
 
 static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 {
+	unsigned long max_timeout;
 	int touch_num;
 	int error;
 
-	error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
-				GOODIX_CONTACT_SIZE + 1);
-	if (error) {
-		dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
-		return error;
-	}
+	/*
+	 * The 'buffer status' bit, which indicates that the data is valid, is
+	 * not set as soon as the interrupt is raised, but slightly after.
+	 * This takes around 10 ms to happen, so we poll for 20 ms.
+	 */
+	max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
+	do {
+		error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
+					data, GOODIX_CONTACT_SIZE + 1);
+		if (error) {
+			dev_err(&ts->client->dev, "I2C transfer error: %d\n",
+					error);
+			return error;
+		}
 
-	if (!(data[0] & 0x80))
-		return -EAGAIN;
+		if (data[0] & GOODIX_BUFFER_STATUS_READY) {
+			touch_num = data[0] & 0x0f;
+			if (touch_num > ts->max_touch_num)
+				return -EPROTO;
+
+			if (touch_num > 1) {
+				data += 1 + GOODIX_CONTACT_SIZE;
+				error = goodix_i2c_read(ts->client,
+						GOODIX_READ_COOR_ADDR +
+							1 + GOODIX_CONTACT_SIZE,
+						data,
+						GOODIX_CONTACT_SIZE *
+							(touch_num - 1));
+				if (error)
+					return error;
+			}
+
+			return touch_num;
+		}
 
-	touch_num = data[0] & 0x0f;
-	if (touch_num > ts->max_touch_num)
-		return -EPROTO;
-
-	if (touch_num > 1) {
-		data += 1 + GOODIX_CONTACT_SIZE;
-		error = goodix_i2c_read(ts->client,
-					GOODIX_READ_COOR_ADDR +
-						1 + GOODIX_CONTACT_SIZE,
-					data,
-					GOODIX_CONTACT_SIZE * (touch_num - 1));
-		if (error)
-			return error;
-	}
+		usleep_range(1000, 2000); /* Poll every 1 - 2 ms */
+	} while (time_before(jiffies, max_timeout));
 
-	return touch_num;
+	/*
+	 * The Goodix panel will send spurious interrupts after a
+	 * 'finger up' event, which will always cause a timeout.
+	 */
+	return 0;
 }
 
 static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)

drivers/input/touchscreen/stmfts.c

@@ -663,12 +663,10 @@ static int stmfts_probe(struct i2c_client *client,
 	sdata->input->open = stmfts_input_open;
 	sdata->input->close = stmfts_input_close;
 
+	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
 	touchscreen_parse_properties(sdata->input, true, &sdata->prop);
 
-	input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
-						sdata->prop.max_x, 0, 0);
-	input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
-						sdata->prop.max_y, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
 	input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -161,7 +161,7 @@ static void titsc_step_config(struct titsc *ts_dev)
 		break;
 	case 5:
 		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
-				ts_dev->bit_xn | ts_dev->bit_yp;
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
 		break;
 	case 8:
 		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);

include/linux/input.h

@@ -234,6 +234,10 @@ struct input_dev {
 #error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
 #endif
 
+#if INPUT_PROP_MAX != INPUT_DEVICE_ID_PROP_MAX
+#error "INPUT_PROP_MAX and INPUT_DEVICE_ID_PROP_MAX do not match"
+#endif
+
 #define INPUT_DEVICE_ID_MATCH_DEVICE \
 	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
 #define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
@@ -469,6 +473,9 @@ int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke);
 int input_set_keycode(struct input_dev *dev,
 		      const struct input_keymap_entry *ke);
 
+bool input_match_device_id(const struct input_dev *dev,
+			   const struct input_device_id *id);
+
 void input_enable_softrepeat(struct input_dev *dev, int delay, int period);
 
 extern struct class input_class;

include/linux/mod_devicetable.h

@@ -293,6 +293,7 @@ struct pcmcia_device_id {
 #define INPUT_DEVICE_ID_SND_MAX		0x07
 #define INPUT_DEVICE_ID_FF_MAX		0x7f
 #define INPUT_DEVICE_ID_SW_MAX		0x0f
+#define INPUT_DEVICE_ID_PROP_MAX	0x1f
 
 #define INPUT_DEVICE_ID_MATCH_BUS	1
 #define INPUT_DEVICE_ID_MATCH_VENDOR	2
@@ -308,6 +309,7 @@ struct pcmcia_device_id {
 #define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
 #define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
 #define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
+#define INPUT_DEVICE_ID_MATCH_PROPBIT	0x2000
 
 struct input_device_id {
 
@@ -327,6 +329,7 @@ struct input_device_id {
 	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t propbit[INPUT_DEVICE_ID_PROP_MAX / BITS_PER_LONG + 1];
 
 	kernel_ulong_t driver_info;
 };

scripts/mod/devicetable-offsets.c

@@ -105,6 +105,7 @@ int main(void)
 	DEVID_FIELD(input_device_id, sndbit);
 	DEVID_FIELD(input_device_id, ffbit);
 	DEVID_FIELD(input_device_id, swbit);
+	DEVID_FIELD(input_device_id, propbit);
 
 	DEVID(eisa_device_id);
 	DEVID_FIELD(eisa_device_id, sig);

scripts/mod/file2alias.c

@@ -761,7 +761,7 @@ static void do_input(char *alias,
 			sprintf(alias + strlen(alias), "%X,*", i);
 }
 
-/* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */
+/* input:b0v0p0e0-eXkXrXaXmXlXsXfXwXprX where X is comma-separated %02X. */
 static int do_input_entry(const char *filename, void *symval,
 			  char *alias)
 {
@@ -779,6 +779,7 @@ static int do_input_entry(const char *filename, void *symval,
 	DEF_FIELD_ADDR(symval, input_device_id, sndbit);
 	DEF_FIELD_ADDR(symval, input_device_id, ffbit);
 	DEF_FIELD_ADDR(symval, input_device_id, swbit);
+	DEF_FIELD_ADDR(symval, input_device_id, propbit);
 
 	sprintf(alias, "input:");
 
@@ -816,6 +817,9 @@ static int do_input_entry(const char *filename, void *symval,
 	sprintf(alias + strlen(alias), "w*");
 	if (flags & INPUT_DEVICE_ID_MATCH_SWBIT)
 		do_input(alias, *swbit, 0, INPUT_DEVICE_ID_SW_MAX);
+	sprintf(alias + strlen(alias), "pr*");
+	if (flags & INPUT_DEVICE_ID_MATCH_PROPBIT)
+		do_input(alias, *propbit, 0, INPUT_DEVICE_ID_PROP_MAX);
 	return 1;
 }
 ADD_TO_DEVTABLE("input", input_device_id, do_input_entry);