提交 e4582b6a 编写于 作者: G Greg Kroah-Hartman

USB: kobil_sct.h: checkpatch cleanups

Minor whitespace cleanups to make checkpatch happy.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 932d22c9
......@@ -23,38 +23,55 @@
#define SUSBCR_SSL_SETDTR 0x0004
#define SUSBCR_SSL_CLRDTR 0x0010
#define SUSBCR_SSL_PURGE_TXABORT 0x0100 // Kill the pending/current writes to the comm port.
#define SUSBCR_SSL_PURGE_RXABORT 0x0200 // Kill the pending/current reads to the comm port.
#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 // Kill the transmit queue if there.
#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 // Kill the typeahead buffer if there.
/* Kill the pending/current writes to the comm port. */
#define SUSBCR_SSL_PURGE_TXABORT 0x0100
/* Kill the pending/current reads to the comm port. */
#define SUSBCR_SSL_PURGE_RXABORT 0x0200
/* Kill the transmit queue if there. */
#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400
/* Kill the typeahead buffer if there. */
#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800
#define SUSBCRequest_GetStatusLineState 4
#define SUSBCR_GSL_RXCHAR 0x0001 // Any Character received
#define SUSBCR_GSL_TXEMPTY 0x0004 // Transmitt Queue Empty
#define SUSBCR_GSL_CTS 0x0008 // CTS changed state
#define SUSBCR_GSL_DSR 0x0010 // DSR changed state
#define SUSBCR_GSL_RLSD 0x0020 // RLSD changed state
#define SUSBCR_GSL_BREAK 0x0040 // BREAK received
#define SUSBCR_GSL_ERR 0x0080 // Line status error occurred
#define SUSBCR_GSL_RING 0x0100 // Ring signal detected
/* Any Character received */
#define SUSBCR_GSL_RXCHAR 0x0001
/* Transmitt Queue Empty */
#define SUSBCR_GSL_TXEMPTY 0x0004
/* CTS changed state */
#define SUSBCR_GSL_CTS 0x0008
/* DSR changed state */
#define SUSBCR_GSL_DSR 0x0010
/* RLSD changed state */
#define SUSBCR_GSL_RLSD 0x0020
/* BREAK received */
#define SUSBCR_GSL_BREAK 0x0040
/* Line status error occurred */
#define SUSBCR_GSL_ERR 0x0080
/* Ring signal detected */
#define SUSBCR_GSL_RING 0x0100
#define SUSBCRequest_Misc 8
#define SUSBCR_MSC_ResetReader 0x0001 // use a predefined reset sequence
#define SUSBCR_MSC_ResetAllQueues 0x0002 // use a predefined sequence to reset the internal queues
/* use a predefined reset sequence */
#define SUSBCR_MSC_ResetReader 0x0001
/* use a predefined sequence to reset the internal queues */
#define SUSBCR_MSC_ResetAllQueues 0x0002
#define SUSBCRequest_GetMisc 0x10
#define SUSBCR_MSC_GetFWVersion 0x0001 /* get the firmware version from device,
coded like this 0xHHLLBBPP
with HH = Firmware Version High Byte
LL = Firmware Version Low Byte
BB = Build Number
PP = Further Attributes
*/
#define SUSBCR_MSC_GetHWVersion 0x0002 /* get the hardware version from device
coded like this 0xHHLLPPRR
with HH = Software Version High Byte
LL = Software Version Low Byte
PP = Further Attributes
RR = Reserved for the hardware ID
*/
/*
* get the firmware version from device, coded like this 0xHHLLBBPP with
* HH = Firmware Version High Byte
* LL = Firmware Version Low Byte
* BB = Build Number
* PP = Further Attributes
*/
#define SUSBCR_MSC_GetFWVersion 0x0001
/*
* get the hardware version from device coded like this 0xHHLLPPRR with
* HH = Software Version High Byte
* LL = Software Version Low Byte
* PP = Further Attributes
* RR = Reserved for the hardware ID
*/
#define SUSBCR_MSC_GetHWVersion 0x0002
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册