提交 e32640a2 编写于 作者: G Glauber Costa 提交者: Ingo Molnar

x86: create smpcommon.c

This patch creates smpcommon.c with functions that are
equal between architectures. The i386-only init_gdt
is ifdef'd.

Note that smpcommon.o figures twice in the Makefile:
this is because sub-architectures like voyager that does
not use the normal smp_$(BITS) files also have to access them
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 3428f3d6
......@@ -47,8 +47,8 @@ obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_X86_SMP) += smp_$(BITS).o smpboot_$(BITS).o smpboot.o tsc_sync.o
obj-$(CONFIG_X86_32_SMP) += smpcommon_32.o
obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o
obj-$(CONFIG_X86_32_SMP) += smpcommon.o
obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse_$(BITS).o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
......
......@@ -401,62 +401,6 @@ int native_smp_call_function_mask(cpumask_t mask,
return ret;
}
/*
* smp_call_function_single - Run a function on a specific CPU
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: Currently unused.
* @wait: If true, wait until function has completed on other CPUs.
*
* Retrurns 0 on success, else a negative status code.
*
* Does not return until the remote CPU is nearly ready to execute <func>
* or is or has executed.
*/
int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
/* prevent preemption and reschedule on another processor */
int ret, me = get_cpu();
if (cpu == me) {
local_irq_disable();
func(info);
local_irq_enable();
put_cpu();
return 0;
}
ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
put_cpu();
return ret;
}
EXPORT_SYMBOL(smp_call_function_single);
/*
* smp_call_function - run a function on all other CPUs.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: currently unused.
* @wait: If true, wait (atomically) until function has completed on other
* CPUs.
*
* Returns 0 on success, else a negative status code. Does not return until
* remote CPUs are nearly ready to execute func or are or have executed.
*
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
* Actually there are a few legal cases, like panic.
*/
int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
int wait)
{
return smp_call_function_mask(cpu_online_map, func, info, wait);
}
EXPORT_SYMBOL(smp_call_function);
static void stop_this_cpu(void *dummy)
{
local_irq_disable();
......
/*
* SMP stuff which is common to all sub-architectures.
*/
#include <linux/module.h>
#include <asm/smp.h>
#ifdef CONFIG_X86_32
DEFINE_PER_CPU(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
/* Initialize the CPU's GDT. This is either the boot CPU doing itself
(still using the master per-cpu area), or a CPU doing it for a
secondary which will soon come up. */
__cpuinit void init_gdt(int cpu)
{
struct desc_struct *gdt = get_cpu_gdt_table(cpu);
pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
__per_cpu_offset[cpu], 0xFFFFF,
0x2 | DESCTYPE_S, 0x8);
gdt[GDT_ENTRY_PERCPU].s = 1;
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(cpu_number, cpu) = cpu;
}
#endif
/**
* smp_call_function(): Run a function on all other CPUs.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: Unused.
* @wait: If true, wait (atomically) until function has completed on other CPUs.
*
* Returns 0 on success, else a negative status code.
*
* If @wait is true, then returns once @func has returned; otherwise
* it returns just before the target cpu calls @func.
*
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
int wait)
{
return smp_call_function_mask(cpu_online_map, func, info, wait);
}
EXPORT_SYMBOL(smp_call_function);
/**
* smp_call_function_single - Run a function on a specific CPU
* @cpu: The target CPU. Cannot be the calling CPU.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: Unused.
* @wait: If true, wait until function has completed on other CPUs.
*
* Returns 0 on success, else a negative status code.
*
* If @wait is true, then returns once @func has returned; otherwise
* it returns just before the target cpu calls @func.
*/
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
/* prevent preemption and reschedule on another processor */
int ret;
int me = get_cpu();
if (cpu == me) {
local_irq_disable();
func(info);
local_irq_enable();
put_cpu();
return 0;
}
ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
put_cpu();
return ret;
}
EXPORT_SYMBOL(smp_call_function_single);
/*
* SMP stuff which is common to all sub-architectures.
*/
#include <linux/module.h>
#include <asm/smp.h>
DEFINE_PER_CPU(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
/* Initialize the CPU's GDT. This is either the boot CPU doing itself
(still using the master per-cpu area), or a CPU doing it for a
secondary which will soon come up. */
__cpuinit void init_gdt(int cpu)
{
struct desc_struct *gdt = get_cpu_gdt_table(cpu);
pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
__per_cpu_offset[cpu], 0xFFFFF,
0x2 | DESCTYPE_S, 0x8);
gdt[GDT_ENTRY_PERCPU].s = 1;
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(cpu_number, cpu) = cpu;
}
/**
* smp_call_function(): Run a function on all other CPUs.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: Unused.
* @wait: If true, wait (atomically) until function has completed on other CPUs.
*
* Returns 0 on success, else a negative status code.
*
* If @wait is true, then returns once @func has returned; otherwise
* it returns just before the target cpu calls @func.
*
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
int wait)
{
return smp_call_function_mask(cpu_online_map, func, info, wait);
}
EXPORT_SYMBOL(smp_call_function);
/**
* smp_call_function_single - Run a function on a specific CPU
* @cpu: The target CPU. Cannot be the calling CPU.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: Unused.
* @wait: If true, wait until function has completed on other CPUs.
*
* Returns 0 on success, else a negative status code.
*
* If @wait is true, then returns once @func has returned; otherwise
* it returns just before the target cpu calls @func.
*/
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
/* prevent preemption and reschedule on another processor */
int ret;
int me = get_cpu();
if (cpu == me) {
local_irq_disable();
func(info);
local_irq_enable();
put_cpu();
return 0;
}
ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
put_cpu();
return ret;
}
EXPORT_SYMBOL(smp_call_function_single);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册