提交 e227867f 编写于 作者: M Masanari Iida 提交者: Jiri Kosina

treewide: Fix typo in Documentation/DocBook

This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 42552993
......@@ -199,7 +199,7 @@ struct esw_eadm {
/**
* struct irb - interruption response block
* @scsw: subchannel status word
* @esw: extened status word
* @esw: extended status word
* @ecw: extended control word
*
* The irb that is handed to the device driver when an interrupt occurs. For
......
......@@ -1900,7 +1900,7 @@ EXPORT_SYMBOL(submit_bio);
* in some cases below, so export this function.
* Request stacking drivers like request-based dm may change the queue
* limits while requests are in the queue (e.g. dm's table swapping).
* Such request stacking drivers should check those requests agaist
* Such request stacking drivers should check those requests against
* the new queue limits again when they dispatch those requests,
* although such checkings are also done against the old queue limits
* when submitting requests.
......
......@@ -285,7 +285,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user);
*
* Description:
* Data will be mapped directly if possible. Otherwise a bounce
* buffer is used. Can be called multple times to append multple
* buffer is used. Can be called multiple times to append multiple
* buffers.
*/
int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
......
......@@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
* @dma_dir: Data transfer direction of the command
* @sgl: sg list for the data buffer of the command
* @n_elem: Number of sg entries
* @timeout: Timeout in msecs (0 for default)
......@@ -1712,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
* @dma_dir: Data transfer direction of the command
* @buf: Data buffer of the command
* @buflen: Length of data buffer
* @timeout: Timeout in msecs (0 for default)
......
......@@ -1209,7 +1209,7 @@ static int subsys_register(struct bus_type *subsys,
* with the name of the subsystem. The root device can carry subsystem-
* wide attributes. All registered devices are below this single root
* device and are named after the subsystem with a simple enumeration
* number appended. The registered devices are not explicitely named;
* number appended. The registered devices are not explicitly named;
* only 'id' in the device needs to be set.
*
* Do not use this interface for anything new, it exists for compatibility
......
......@@ -593,7 +593,7 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
* Caller must hold mode config lock.
*
* Setup a new configuration, provided by the upper layers (either an ioctl call
* from userspace or internally e.g. from the fbdev suppport code) in @set, and
* from userspace or internally e.g. from the fbdev support code) in @set, and
* enable it. This is the main helper functions for drivers that implement
* kernel mode setting with the crtc helper functions and the assorted
* ->prepare(), ->modeset() and ->commit() helper callbacks.
......
......@@ -236,7 +236,7 @@ EXPORT_SYMBOL(sparse_keymap_setup);
* in an input device that was set up by sparse_keymap_setup().
* NOTE: It is safe to cal this function while input device is
* still registered (however the drivers should care not to try to
* use freed keymap and thus have to shut off interrups/polling
* use freed keymap and thus have to shut off interrupts/polling
* before freeing the keymap).
*/
void sparse_keymap_free(struct input_dev *dev)
......
......@@ -2134,7 +2134,7 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled);
* @regulator: regulator source
*
* Returns positive if the regulator driver backing the source/client
* can change its voltage, false otherwise. Usefull for detecting fixed
* can change its voltage, false otherwise. Useful for detecting fixed
* or dummy regulators and disabling voltage change logic in the client
* driver.
*/
......
......@@ -891,7 +891,7 @@ struct bus_type iscsi_flashnode_bus = {
* Adds a sysfs entry for the flashnode session attributes
*
* Returns:
* pointer to allocated flashnode sess on sucess
* pointer to allocated flashnode sess on success
* %NULL on failure
*/
struct iscsi_bus_flash_session *
......@@ -1089,7 +1089,7 @@ static int iscsi_iter_destroy_flashnode_conn_fn(struct device *dev, void *data)
}
/**
* iscsi_destroy_flashnode_sess - destory flashnode session entry
* iscsi_destroy_flashnode_sess - destroy flashnode session entry
* @fnode_sess: pointer to flashnode session entry to be destroyed
*
* Deletes the flashnode session entry and all children flashnode connection
......@@ -1119,7 +1119,7 @@ static int iscsi_iter_destroy_flashnode_fn(struct device *dev, void *data)
}
/**
* iscsi_destroy_all_flashnode - destory all flashnode session entries
* iscsi_destroy_all_flashnode - destroy all flashnode session entries
* @shost: pointer to host data
*
* Destroys all the flashnode session entries and all corresponding children
......
......@@ -179,7 +179,7 @@ EXPORT_SYMBOL_GPL(usb_control_msg);
*
* Return:
* If successful, 0. Otherwise a negative error number. The number of actual
* bytes transferred will be stored in the @actual_length paramater.
* bytes transferred will be stored in the @actual_length parameter.
*/
int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length, int timeout)
......
......@@ -834,7 +834,7 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs);
*
* this allows all outstanding URBs to be unlinked starting
* from the back of the queue. This function is asynchronous.
* The unlinking is just tiggered. It may happen after this
* The unlinking is just triggered. It may happen after this
* function has returned.
*
* This routine should not be called by a driver after its disconnect
......
......@@ -3086,7 +3086,7 @@ EXPORT_SYMBOL(submit_bh);
* until the buffer gets unlocked).
*
* ll_rw_block sets b_end_io to simple completion handler that marks
* the buffer up-to-date (if approriate), unlocks the buffer and wakes
* the buffer up-to-date (if appropriate), unlocks the buffer and wakes
* any waiters.
*
* All of the buffers must be for the same device, and must also be a
......
......@@ -358,7 +358,7 @@ static struct dentry *__create_file(const char *name, umode_t mode,
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have.
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this paramater is NULL, then the
* directory dentry if set. If this parameter is NULL, then the
* file will be created in the root of the debugfs filesystem.
* @data: a pointer to something that the caller will want to get to later
* on. The inode.i_private pointer will point to this value on
......@@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_file);
* @name: a pointer to a string containing the name of the directory to
* create.
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this paramater is NULL, then the
* directory dentry if set. If this parameter is NULL, then the
* directory will be created in the root of the debugfs filesystem.
*
* This function creates a directory in debugfs with the given name.
......@@ -425,7 +425,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_dir);
* @name: a pointer to a string containing the name of the symbolic link to
* create.
* @parent: a pointer to the parent dentry for this symbolic link. This
* should be a directory dentry if set. If this paramater is NULL,
* should be a directory dentry if set. If this parameter is NULL,
* then the symbolic link will be created in the root of the debugfs
* filesystem.
* @target: a pointer to a string containing the path to the target of the
......
......@@ -55,7 +55,7 @@ struct drm_fb_helper_surface_size {
* save the current lut when force-restoring the fbdev for e.g.
* kdbg.
* @fb_probe: Driver callback to allocate and initialize the fbdev info
* structure. Futhermore it also needs to allocate the drm
* structure. Furthermore it also needs to allocate the drm
* framebuffer used to back the fbdev.
* @initial_config: Setup an initial fbdev display configuration
*
......
......@@ -178,7 +178,7 @@ static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
* @complete: Transfer completion callback
* @destructor: Destructor to free resources when flushing
* @status: Status of the transfer when completed
* @actual_len: Actual length of data transfered on completion
* @actual_len: Actual length of data transferred on completion
* @channel: Channel were to TX/RX the message
* @ttype: Transfer type (TX if set, RX otherwise)
* @break_frame: if true HSI will send/receive a break frame. Data buffers are
......
......@@ -722,7 +722,7 @@ __kfifo_uint_must_check_helper( \
/**
* kfifo_dma_out_finish - finish a DMA OUT operation
* @fifo: address of the fifo to be used
* @len: number of bytes transferd
* @len: number of bytes transferrd
*
* This macro finish a DMA OUT operation. The out counter will be updated by
* the len parameter. No error checking will be done.
......
......@@ -35,7 +35,7 @@ struct pipe_buffer {
* @tmp_page: cached released page
* @readers: number of current readers of this pipe
* @writers: number of current writers of this pipe
* @files: number of struct file refering this pipe (protected by ->i_lock)
* @files: number of struct file referring this pipe (protected by ->i_lock)
* @waiting_writers: number of writers blocked waiting for room
* @r_counter: reader counter
* @w_counter: writer counter
......
......@@ -1951,7 +1951,7 @@ static inline void skb_propagate_pfmemalloc(struct page *page,
}
/**
* skb_frag_page - retrieve the page refered to by a paged fragment
* skb_frag_page - retrieve the page referred to by a paged fragment
* @frag: the paged fragment
*
* Returns the &struct page associated with @frag.
......
......@@ -234,7 +234,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @mode_bits: flags understood by this controller driver
* @bits_per_word_mask: A mask indicating which values of bits_per_word are
* supported by the driver. Bit n indicates that a bits_per_word n+1 is
* suported. If set, the SPI core will reject any transfer with an
* supported. If set, the SPI core will reject any transfer with an
* unsupported bits_per_word. If not set, this value is simply ignored,
* and it's up to the individual driver to perform any validation.
* @min_speed_hz: Lowest supported transfer speed
......@@ -259,7 +259,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @cur_msg: the currently in-flight message
* @cur_msg_prepared: spi_prepare_message was called for the currently
* in-flight message
* @xfer_completion: used by core tranfer_one_message()
* @xfer_completion: used by core transfer_one_message()
* @busy: message pump is busy
* @running: message pump is running
* @rt: whether this queue is set to run as a realtime task
......@@ -493,7 +493,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* @rx_buf: data to be read (dma-safe memory), or NULL
* @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
* @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
* @tx_nbits: number of bits used for writting. If 0 the default
* @tx_nbits: number of bits used for writing. If 0 the default
* (SPI_NBITS_SINGLE) is used.
* @rx_nbits: number of bits used for reading. If 0 the default
* (SPI_NBITS_SINGLE) is used.
......@@ -551,7 +551,7 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* by the results of previous messages and where the whole transaction
* ends when the chipselect goes intactive.
*
* When SPI can transfer in 1x,2x or 4x. It can get this tranfer information
* When SPI can transfer in 1x,2x or 4x. It can get this transfer information
* from device through @tx_nbits and @rx_nbits. In Bi-direction, these
* two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x)
* SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer.
......
......@@ -92,7 +92,7 @@ struct usb_configuration;
* @suspend: Notifies functions when the host stops sending USB traffic.
* @resume: Notifies functions when the host restarts USB traffic.
* @get_status: Returns function status as a reply to
* GetStatus() request when the recepient is Interface.
* GetStatus() request when the recipient is Interface.
* @func_suspend: callback to be called when
* SetFeature(FUNCTION_SUSPEND) is reseived
*
......
......@@ -1841,7 +1841,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
*
* Driver informs U-APSD client support by enabling
* %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
* uapsd paramater in conf_tx() operation. Hardware needs to send the QoS
* uapsd parameter in conf_tx() operation. Hardware needs to send the QoS
* Nullfunc frames and stay awake until the service period has ended. To
* utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
* from that AC are transmitted with powersave enabled.
......@@ -2047,7 +2047,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* with the number of frames to be released and which TIDs they are
* to come from. In this case, the driver is responsible for setting
* the EOSP (for uAPSD) and MORE_DATA bits in the released frames,
* to help the @more_data paramter is passed to tell the driver if
* to help the @more_data parameter is passed to tell the driver if
* there is more data on other TIDs -- the TIDs to release frames
* from are ignored since mac80211 doesn't know how many frames the
* buffers for those TIDs contain.
......@@ -2592,7 +2592,7 @@ enum ieee80211_roc_type {
* parameters. In the case where the driver buffers some frames for
* sleeping stations mac80211 will use this callback to tell the driver
* to release some frames, either for PS-poll or uAPSD.
* Note that if the @more_data paramter is %false the driver must check
* Note that if the @more_data parameter is %false the driver must check
* if there are more frames on the given TIDs, and if there are more than
* the frames being released then it must still set the more-data bit in
* the frame. If the @more_data parameter is %true, then of course the
......
......@@ -227,7 +227,7 @@ static void relay_destroy_buf(struct rchan_buf *buf)
* relay_remove_buf - remove a channel buffer
* @kref: target kernel reference that contains the relay buffer
*
* Removes the file from the fileystem, which also frees the
* Removes the file from the filesystem, which also frees the
* rchan_buf_struct and the channel buffer. Should only be called from
* kref_put().
*/
......
......@@ -2382,7 +2382,7 @@ int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka,
* @regs: user register state
* @stepping: nonzero if debugger single-step or block-step in use
*
* This function should be called when a signal has succesfully been
* This function should be called when a signal has successfully been
* delivered. It updates the blocked signals accordingly (@ka->sa.sa_mask
* is always blocked, and the signal itself is blocked unless %SA_NODEFER
* is set in @ka->sa.sa_flags. Tracing is notified.
......
......@@ -3424,7 +3424,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb,
* @rx_handler: receive handler to register
* @rx_handler_data: data pointer that is used by rx handler
*
* Register a receive hander for a device. This handler will then be
* Register a receive handler for a device. This handler will then be
* called from __netif_receive_skb. A negative errno code is returned
* on a failure.
*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册