提交 e134fb2b 编写于 作者: U Uwe Kleine-König 提交者: Sascha Hauer

ARM: mx3+mx5: rename mxc_board_init to ${machine}_init

mxc_board_init is too generic to be useful.  Additionally change some
mxc_timer to ${machine}_timer, too.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 4bd597b6
......@@ -156,7 +156,7 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init eukrea_cpuimx35_init(void)
{
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
ARRAY_SIZE(eukrea_cpuimx35_pads));
......@@ -199,5 +199,5 @@ MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
.init_ext3_fs = imx35_init_early,
.init_irq = mx35_init_irq,
.timer = &eukrea_cpuimx35_timer,
.init_machine = mxc_board_init,
.init_machine = eukrea_cpuimx35_init,
MACHINE_END
......@@ -266,13 +266,9 @@ static void __init kzm_timer_init(void)
}
static struct sys_timer kzm_timer = {
.init = kzm_timer_init,
.init = kzm_timer_init,
};
/*
* The following uses standard kernel macros define in arch.h in order to
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
......
......@@ -327,10 +327,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
/*!
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx31_3ds_init(void)
{
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
......@@ -385,5 +382,5 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.timer = &mx31_3ds_timer,
.init_machine = mxc_board_init,
.init_machine = mx31_3ds_init,
MACHINE_END
......@@ -524,10 +524,7 @@ static void __init mx31ads_init_irq(void)
mx31ads_init_expio();
}
/*!
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx31ads_init(void)
{
mxc_init_extuart();
mxc_init_imx_uart();
......@@ -555,5 +552,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
.timer = &mx31ads_timer,
.init_machine = mxc_board_init,
.init_machine = mx31ads_init,
MACHINE_END
......@@ -229,7 +229,7 @@ void __init mx31lite_map_io(void)
static int mx31lite_baseboard;
core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
static void __init mxc_board_init(void)
static void __init mx31lite_init(void)
{
int ret;
......@@ -288,5 +288,5 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.timer = &mx31lite_timer,
.init_machine = mxc_board_init,
.init_machine = mx31lite_init,
MACHINE_END
......@@ -507,7 +507,7 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx31moboard_init(void)
{
mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
"moboard");
......@@ -573,5 +573,5 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.timer = &mx31moboard_timer,
.init_machine = mxc_board_init,
.init_machine = mx31moboard_init,
MACHINE_END
......@@ -166,7 +166,7 @@ __setup("otg_mode=", mx35_3ds_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx35_3ds_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
......@@ -208,5 +208,5 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.timer = &mx35pdk_timer,
.init_machine = mxc_board_init,
.init_machine = mx35_3ds_init,
MACHINE_END
......@@ -578,7 +578,7 @@ __setup("otg_mode=", pcm037_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init pcm037_init(void)
{
int ret;
......@@ -690,5 +690,5 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.timer = &pcm037_timer,
.init_machine = mxc_board_init,
.init_machine = pcm037_init,
MACHINE_END
......@@ -351,7 +351,7 @@ __setup("otg_mode=", pcm043_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init pcm043_init(void)
{
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
......@@ -418,5 +418,5 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
.timer = &pcm043_timer,
.init_machine = mxc_board_init,
.init_machine = pcm043_init,
MACHINE_END
......@@ -247,7 +247,7 @@ static void __init qong_init_fpga(void)
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init qong_init(void)
{
mxc_init_imx_uart();
qong_init_nor_mtd();
......@@ -275,5 +275,5 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.timer = &qong_timer,
.init_machine = mxc_board_init,
.init_machine = qong_init,
MACHINE_END
......@@ -133,7 +133,7 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx51_3ds_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
ARRAY_SIZE(mx51_3ds_pads));
......@@ -160,8 +160,8 @@ static void __init mx51_3ds_timer_init(void)
mx51_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mxc_timer = {
.init = mx51_3ds_timer_init,
static struct sys_timer mx51_3ds_timer = {
.init = mx51_3ds_timer_init,
};
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
......@@ -170,6 +170,6 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.timer = &mxc_timer,
.init_machine = mxc_board_init,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
MACHINE_END
......@@ -341,7 +341,7 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
......@@ -395,8 +395,8 @@ static void __init mx51_babbage_timer_init(void)
mx51_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mxc_timer = {
.init = mx51_babbage_timer_init,
static struct sys_timer mx51_babbage_timer = {
.init = mx51_babbage_timer_init,
};
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
......@@ -405,6 +405,6 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.timer = &mxc_timer,
.init_machine = mxc_board_init,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
MACHINE_END
......@@ -303,7 +303,7 @@ void mx51_efikamx_reset(void)
gpio_direction_output(EFIKAMX_RESET, 0);
}
static void __init mxc_board_init(void)
static void __init mx51_efikamx_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
......@@ -341,8 +341,8 @@ static void __init mx51_efikamx_timer_init(void)
mx51_clocks_init(32768, 24000000, 22579200, 24576000);
}
static struct sys_timer mxc_timer = {
.init = mx51_efikamx_timer_init,
static struct sys_timer mx51_efikamx_timer = {
.init = mx51_efikamx_timer_init,
};
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
......@@ -351,6 +351,6 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
.timer = &mxc_timer,
.init_machine = mxc_board_init,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
MACHINE_END
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册