提交 e10fa551 编写于 作者: J Joonas Lahtinen

drm/i915: Clean up PCI config register handling

Do not use magic numbers, do not prefix stuff with "PCI_", do not
declare registers in implementation files. Also move the PCI
registers under correct comment in i915_reg.h.

v2:
- Consistently use BSM (not BDSM or other variants from PRM) (Chris)
- Also include register address to help identify the register (Chris)
v3:
- Refer to register value as *_val instead of *_reg (Chris)
v4:
- Make style checker happy

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
上级 44a71024
......@@ -257,13 +257,6 @@ static int i915_get_bridge_dev(struct drm_device *dev)
return 0;
}
#define MCHBAR_I915 0x44
#define MCHBAR_I965 0x48
#define MCHBAR_SIZE (4*4096)
#define DEVEN_REG 0x54
#define DEVEN_MCHBAR_EN (1 << 28)
/* Allocate space for the MCH regs if needed, return nonzero on error */
static int
intel_alloc_mchbar_resource(struct drm_device *dev)
......@@ -325,7 +318,7 @@ intel_setup_mchbar(struct drm_device *dev)
dev_priv->mchbar_need_disable = false;
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
enabled = !!(temp & DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
......@@ -343,7 +336,7 @@ intel_setup_mchbar(struct drm_device *dev)
/* Space is allocated or reserved, so enable it. */
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
temp | DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
......@@ -356,17 +349,24 @@ intel_teardown_mchbar(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
if (dev_priv->mchbar_need_disable) {
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
temp &= ~DEVEN_MCHBAR_EN;
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
u32 deven_val;
pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
&deven_val);
deven_val &= ~DEVEN_MCHBAR_EN;
pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
deven_val);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
temp &= ~1;
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
u32 mchbar_val;
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
&mchbar_val);
mchbar_val &= ~1;
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
mchbar_val);
}
}
......
......@@ -95,9 +95,9 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
u32 base;
/* Almost universally we can find the Graphics Base of Stolen Memory
* at offset 0x5c in the igfx configuration space. On a few (desktop)
* machines this is also mirrored in the bridge device at different
* locations, or in the MCHBAR.
* at register BSM (0x5c) in the igfx configuration space. On a few
* (desktop) machines this is also mirrored in the bridge device at
* different locations, or in the MCHBAR.
*
* On 865 we just check the TOUD register.
*
......@@ -107,9 +107,11 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
*/
base = 0;
if (INTEL_INFO(dev)->gen >= 3) {
/* Read Graphics Base of Stolen Memory directly */
pci_read_config_dword(dev->pdev, 0x5c, &base);
base &= ~((1<<20) - 1);
u32 bsm;
pci_read_config_dword(dev->pdev, BSM, &bsm);
base = bsm & BSM_MASK;
} else if (IS_I865G(dev)) {
u16 toud = 0;
......
......@@ -79,6 +79,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
/* PCI config space */
#define MCHBAR_I915 0x44
#define MCHBAR_I965 0x48
#define MCHBAR_SIZE (4 * 4096)
#define DEVEN 0x54
#define DEVEN_MCHBAR_EN (1 << 28)
#define BSM 0x5c
#define BSM_MASK (0xFFFF << 20)
#define HPLLCC 0xc0 /* 85x only */
#define GC_CLOCK_CONTROL_MASK (0x7 << 0)
#define GC_CLOCK_133_200 (0 << 0)
......@@ -90,6 +100,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define GC_CLOCK_166_266 (6 << 0)
#define GC_CLOCK_166_250 (7 << 0)
#define I915_GDRST 0xc0 /* PCI config register */
#define GRDOM_FULL (0 << 2)
#define GRDOM_RENDER (1 << 2)
#define GRDOM_MEDIA (3 << 2)
#define GRDOM_MASK (3 << 2)
#define GRDOM_RESET_STATUS (1 << 1)
#define GRDOM_RESET_ENABLE (1 << 0)
#define GCDGMBUS 0xcc
#define GCFGC2 0xda
#define GCFGC 0xf0 /* 915+ only */
#define GC_LOW_FREQUENCY_ENABLE (1 << 7)
......@@ -121,18 +141,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define I915_GC_RENDER_CLOCK_166_MHZ (0 << 0)
#define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0)
#define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0)
#define GCDGMBUS 0xcc
#define PCI_LBPC 0xf4 /* legacy/combination backlight modes, also called LBB */
#define ASLE 0xe4
#define ASLS 0xfc
#define SWSCI 0xe8
#define SWSCI_SCISEL (1 << 15)
#define SWSCI_GSSCIE (1 << 0)
#define LBPC 0xf4 /* legacy/combination backlight modes, also called LBB */
/* Graphics reset regs */
#define I915_GDRST 0xc0 /* PCI config register */
#define GRDOM_FULL (0<<2)
#define GRDOM_RENDER (1<<2)
#define GRDOM_MEDIA (3<<2)
#define GRDOM_MASK (3<<2)
#define GRDOM_RESET_STATUS (1<<1)
#define GRDOM_RESET_ENABLE (1<<0)
#define ILK_GDSR _MMIO(MCHBAR_MIRROR_BASE + 0x2ca4)
#define ILK_GRDOM_FULL (0<<1)
......
......@@ -34,12 +34,6 @@
#include "i915_drv.h"
#include "intel_drv.h"
#define PCI_ASLE 0xe4
#define PCI_ASLS 0xfc
#define PCI_SWSCI 0xe8
#define PCI_SWSCI_SCISEL (1 << 15)
#define PCI_SWSCI_GSSCIE (1 << 0)
#define OPREGION_HEADER_OFFSET 0
#define OPREGION_ACPI_OFFSET 0x100
#define ACPI_CLID 0x01ac /* current lid state indicator */
......@@ -251,7 +245,7 @@ static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_swsci *swsci = dev_priv->opregion.swsci;
u32 main_function, sub_function, scic;
u16 pci_swsci;
u16 swsci_val;
u32 dslp;
if (!swsci)
......@@ -299,16 +293,16 @@ static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
swsci->scic = scic;
/* Ensure SCI event is selected and event trigger is cleared. */
pci_read_config_word(dev->pdev, PCI_SWSCI, &pci_swsci);
if (!(pci_swsci & PCI_SWSCI_SCISEL) || (pci_swsci & PCI_SWSCI_GSSCIE)) {
pci_swsci |= PCI_SWSCI_SCISEL;
pci_swsci &= ~PCI_SWSCI_GSSCIE;
pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
pci_read_config_word(dev->pdev, SWSCI, &swsci_val);
if (!(swsci_val & SWSCI_SCISEL) || (swsci_val & SWSCI_GSSCIE)) {
swsci_val |= SWSCI_SCISEL;
swsci_val &= ~SWSCI_GSSCIE;
pci_write_config_word(dev->pdev, SWSCI, swsci_val);
}
/* Use event trigger to tell bios to check the mail. */
pci_swsci |= PCI_SWSCI_GSSCIE;
pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
swsci_val |= SWSCI_GSSCIE;
pci_write_config_word(dev->pdev, SWSCI, swsci_val);
/* Poll for the result. */
#define C (((scic = swsci->scic) & SWSCI_SCIC_INDICATOR) == 0)
......@@ -939,7 +933,7 @@ int intel_opregion_setup(struct drm_device *dev)
BUILD_BUG_ON(sizeof(struct opregion_asle) != 0x100);
BUILD_BUG_ON(sizeof(struct opregion_asle_ext) != 0x400);
pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
pci_read_config_dword(dev->pdev, ASLS, &asls);
DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
if (asls == 0) {
DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
......
......@@ -504,7 +504,7 @@ static u32 i9xx_get_backlight(struct intel_connector *connector)
if (panel->backlight.combination_mode) {
u8 lbpc;
pci_read_config_byte(dev_priv->dev->pdev, PCI_LBPC, &lbpc);
pci_read_config_byte(dev_priv->dev->pdev, LBPC, &lbpc);
val *= lbpc;
}
......@@ -592,7 +592,7 @@ static void i9xx_set_backlight(struct intel_connector *connector, u32 level)
lbpc = level * 0xfe / panel->backlight.max + 1;
level /= lbpc;
pci_write_config_byte(dev_priv->dev->pdev, PCI_LBPC, lbpc);
pci_write_config_byte(dev_priv->dev->pdev, LBPC, lbpc);
}
if (IS_GEN4(dev_priv)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册