提交 dd0c0c80 编写于 作者: M Mark Brown 提交者: Takashi Iwai

ALSA: ASoC: Add WM8753 SPI support

Implement SPI support for WM8753, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 df91ddf1
......@@ -40,6 +40,7 @@
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
......@@ -1719,6 +1720,63 @@ static int wm8753_add_i2c_device(struct platform_device *pdev,
}
#endif
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8753_spi_probe(struct spi_device *spi)
{
struct snd_soc_device *socdev = wm8753_socdev;
struct snd_soc_codec *codec = socdev->codec;
int ret;
codec->control_data = spi;
ret = wm8753_init(socdev);
if (ret < 0)
dev_err(&spi->dev, "failed to initialise WM8753\n");
return ret;
}
static int __devexit wm8753_spi_remove(struct spi_device *spi)
{
return 0;
}
static struct spi_driver wm8753_spi_driver = {
.driver = {
.name = "wm8753",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wm8753_spi_probe,
.remove = __devexit_p(wm8753_spi_remove),
};
static int wm8753_spi_write(struct spi_device *spi, const char *data, int len)
{
struct spi_transfer t;
struct spi_message m;
u8 msg[2];
if (len <= 0)
return 0;
msg[0] = data[0];
msg[1] = data[1];
spi_message_init(&m);
memset(&t, 0, (sizeof t));
t.tx_buf = &msg[0];
t.len = len;
spi_message_add_tail(&t, &m);
spi_sync(spi, &m);
return len;
}
#endif
static int wm8753_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
......@@ -1753,8 +1811,14 @@ static int wm8753_probe(struct platform_device *pdev)
codec->hw_write = (hw_write_t)i2c_master_send;
ret = wm8753_add_i2c_device(pdev, setup);
}
#else
/* Add other interfaces here */
#endif
#if defined(CONFIG_SPI_MASTER)
if (setup->spi) {
codec->hw_write = (hw_write_t)wm8753_spi_write;
ret = spi_register_driver(&wm8753_spi_driver);
if (ret != 0)
printk(KERN_ERR "can't add spi driver");
}
#endif
if (ret != 0) {
......@@ -1797,6 +1861,9 @@ static int wm8753_remove(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8753_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8753_spi_driver);
#endif
kfree(codec->private_data);
kfree(codec);
......
......@@ -79,6 +79,7 @@
#define WM8753_ADCTL2 0x3f
struct wm8753_setup_data {
int spi;
int i2c_bus;
unsigned short i2c_address;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册