提交 d5e30845 编写于 作者: L Lennert Buytenhek 提交者: John W. Linville

mwl8k: fix multicast address filter programming

mwl8k's ->prepare_multicast() currently just enables reception of
all multicast packets, which is somewhat ineffective.

Fix this by either disabling all multicast RX, enabling multicast
RX according to the multicast address filter table, or enabling all
multicast RX, depending on whether ->prepare_multicast() was given
any multicast addresses and whether the hardware multicast address
filter table is large enough to fit all requested addresses.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 88de754a
......@@ -1539,7 +1539,10 @@ struct mwl8k_cmd_mac_multicast_adr {
__u8 addr[0][ETH_ALEN];
};
#define MWL8K_ENABLE_RX_MULTICAST 0x000F
#define MWL8K_ENABLE_RX_DIRECTED 0x0001
#define MWL8K_ENABLE_RX_MULTICAST 0x0002
#define MWL8K_ENABLE_RX_ALL_MULTICAST 0x0004
#define MWL8K_ENABLE_RX_BROADCAST 0x0008
static struct mwl8k_cmd_pkt *
__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
......@@ -1547,11 +1550,14 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
{
struct mwl8k_priv *priv = hw->priv;
struct mwl8k_cmd_mac_multicast_adr *cmd;
int allmulti;
int size;
int i;
if (mc_count > priv->num_mcaddrs)
mc_count = priv->num_mcaddrs;
allmulti = 0;
if (mc_count > priv->num_mcaddrs) {
allmulti = 1;
mc_count = 0;
}
size = sizeof(*cmd) + mc_count * ETH_ALEN;
......@@ -1561,16 +1567,24 @@ __mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
cmd->header.code = cpu_to_le16(MWL8K_CMD_MAC_MULTICAST_ADR);
cmd->header.length = cpu_to_le16(size);
cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
cmd->numaddr = cpu_to_le16(mc_count);
for (i = 0; i < mc_count && mclist; i++) {
if (mclist->da_addrlen != ETH_ALEN) {
kfree(cmd);
return NULL;
cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_DIRECTED |
MWL8K_ENABLE_RX_BROADCAST);
if (allmulti) {
cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_ALL_MULTICAST);
} else if (mc_count) {
int i;
cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
cmd->numaddr = cpu_to_le16(mc_count);
for (i = 0; i < mc_count && mclist; i++) {
if (mclist->da_addrlen != ETH_ALEN) {
kfree(cmd);
return NULL;
}
memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
mclist = mclist->next;
}
memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
mclist = mclist->next;
}
return &cmd->header;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册