提交 d190e819 编写于 作者: T Thomas Gleixner

idle: Remove GENERIC_IDLE_LOOP config switch

All archs are converted over. Remove the config switch and the
fallback code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 8198c169
......@@ -216,9 +216,6 @@ config USE_GENERIC_SMP_HELPERS
config GENERIC_SMP_IDLE_THREAD
bool
config GENERIC_IDLE_LOOP
bool
# Select if arch init_task initializer is different to init/init_task.c
config ARCH_INIT_TASK
bool
......
......@@ -17,7 +17,6 @@ config ALPHA
select ARCH_WANT_IPC_PARSE_VERSION
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select GENERIC_CMOS_UPDATE
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
......
......@@ -14,7 +14,6 @@ config ARC
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
select GENERIC_IDLE_LOOP
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_KERNEL_EXECVE
......
......@@ -15,7 +15,6 @@ config ARM
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select GENERIC_IDLE_POLL_SETUP
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
......
......@@ -9,7 +9,6 @@ config ARM64
select CLONE_BACKWARDS
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
......
......@@ -10,7 +10,6 @@ config AVR32
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select GENERIC_IDLE_LOOP
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
select ARCH_HAVE_CUSTOM_GPIO_H
......
......@@ -41,7 +41,6 @@ config BLACKFIN
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
......
......@@ -18,7 +18,6 @@ config C6X
select OF_EARLY_FLATTREE
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select GENERIC_IDLE_LOOP
config MMU
def_bool n
......
......@@ -48,7 +48,6 @@ config CRIS
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD if ETRAX_ARCH_V32
select GENERIC_IDLE_LOOP
select GENERIC_CMOS_UPDATE
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS2
......
......@@ -8,7 +8,6 @@ config FRV
select HAVE_GENERIC_HARDIRQS
select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_IDLE_LOOP
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CPU_DEVICES
......
......@@ -8,7 +8,6 @@ config H8300
select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IDLE_LOOP
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
......
......@@ -24,7 +24,6 @@ config HEXAGON
select NO_IOPORT
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select STACKTRACE_SUPPORT
select KTIME_SCALAR
select GENERIC_CLOCKEVENTS
......
......@@ -35,7 +35,6 @@ config IA64
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_IOMAP
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select ARCH_INIT_TASK
select ARCH_TASK_STRUCT_ALLOCATOR
select ARCH_THREAD_INFO_ALLOCATOR
......
......@@ -13,7 +13,6 @@ config M32R
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IDLE_LOOP
select GENERIC_ATOMIC64
select ARCH_USES_GETTIMEOFFSET
select MODULES_USE_ELF_RELA
......
......@@ -6,7 +6,6 @@ config M68K
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_SHOW
select GENERIC_IDLE_LOOP
select GENERIC_ATOMIC64
select HAVE_UID16
select VIRT_TO_BUS
......
......@@ -7,7 +7,6 @@ config METAG
select EMBEDDED
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select GENERIC_IRQ_SHOW
select GENERIC_SMP_IDLE_THREAD
select HAVE_64BIT_ALIGNED_ACCESS
......
......@@ -26,7 +26,6 @@ config MICROBLAZE
select GENERIC_CPU_DEVICES
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select GENERIC_IDLE_POLL_SETUP
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
......
......@@ -34,7 +34,6 @@ config MIPS
select HAVE_MEMBLOCK_NODE_MAP
select ARCH_DISCARD_MEMBLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select BUILDTIME_EXTABLE_SORT
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
......
......@@ -13,7 +13,6 @@ config MN10300
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
select OLD_SIGACTION
select GENERIC_IDLE_LOOP
config AM33_2
def_bool n
......
......@@ -21,7 +21,6 @@ config OPENRISC
select GENERIC_CLOCKEVENTS
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_IDLE_LOOP
select MODULES_USE_ELF_RELA
config MMU
......
......@@ -18,7 +18,6 @@ config PARISC
select GENERIC_PCI_IOMAP
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
......
......@@ -133,7 +133,6 @@ config PPC
select HAVE_ARCH_JUMP_LABEL
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select GENERIC_CMOS_UPDATE
select GENERIC_TIME_VSYSCALL_OLD
select GENERIC_CLOCKEVENTS
......
......@@ -97,7 +97,6 @@ config S390
select CLONE_BACKWARDS2
select GENERIC_CLOCKEVENTS
select GENERIC_CPU_DEVICES if !SMP
select GENERIC_IDLE_LOOP
select GENERIC_KERNEL_THREAD
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL_OLD
......
......@@ -11,7 +11,6 @@ config SCORE
select ARCH_DISCARD_MEMBLOCK
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select HAVE_MOD_ARCH_SPECIFIC
select VIRT_TO_BUS
select MODULES_USE_ELF_REL
......
......@@ -33,7 +33,6 @@ config SUPERH
select GENERIC_ATOMIC64
select GENERIC_IRQ_SHOW
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select GENERIC_IDLE_POLL_SETUP
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
......
......@@ -37,7 +37,6 @@ config SPARC
select GENERIC_SMP_IDLE_THREAD
select GENERIC_CMOS_UPDATE
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select MODULES_USE_ELF_RELA
......
......@@ -22,7 +22,6 @@ config TILE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select GENERIC_IDLE_LOOP
# FIXME: investigate whether we need/want these options.
# select HAVE_IOREMAP_PROT
......
......@@ -12,7 +12,6 @@ config UML
select GENERIC_CPU_DEVICES
select GENERIC_IO
select GENERIC_CLOCKEVENTS
select GENERIC_IDLE_LOOP
select TTY # Needed for line.c
config MMU
......
......@@ -17,7 +17,6 @@ config UNICORE32
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
select GENERIC_IDLE_LOOP
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
......
......@@ -97,7 +97,6 @@ config X86
select GENERIC_IOMAP
select DCACHE_WORD_ACCESS
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_LOOP
select ARCH_WANT_IPC_PARSE_VERSION if X86_32
select HAVE_ARCH_SECCOMP_FILTER
select BUILDTIME_EXTABLE_SORT
......
......@@ -19,7 +19,6 @@ config XTENSA
select CLONE_BACKWARDS
select IRQ_DOMAIN
select HAVE_OPROFILE
select GENERIC_IDLE_LOOP
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
......
......@@ -10,13 +10,6 @@
#include <trace/events/power.h>
#ifndef CONFIG_GENERIC_IDLE_LOOP
void cpu_startup_entry(enum cpuhp_state state)
{
cpu_idle();
}
#else
static int __read_mostly cpu_idle_force_poll;
void cpu_idle_poll_ctrl(bool enable)
......@@ -112,4 +105,3 @@ void cpu_startup_entry(enum cpuhp_state state)
arch_cpu_idle_prepare();
cpu_idle_loop();
}
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册