提交 d164f6d4 编写于 作者: V Victor Gallardo 提交者: Josh Boyer

powerpc/4xx: Add suspend and idle support

Add suspend/resume support for 4xx compatible CPUs.
See /sys/power/state for available power states configured in.

Add two different idle states (idle-wait and idle-doze) controlled via sysfs.
Default is idle-wait.
	cat /sys/devices/system/cpu/cpu0/idle
	[wait] doze

To save additional power, use idle-doze.
	echo doze > /sys/devices/system/cpu/cpu0/idle
	cat /sys/devices/system/cpu/cpu0/idle
	wait [doze]
Signed-off-by: NVictor Gallardo <vgallardo@apm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
上级 46f52210
PPC4xx Clock Power Management (CPM) node
Required properties:
- compatible : compatible list, currently only "ibm,cpm"
- dcr-access-method : "native"
- dcr-reg : < DCR register range >
Optional properties:
- er-offset : All 4xx SoCs with a CPM controller have
one of two different order for the CPM
registers. Some have the CPM registers
in the following order (ER,FR,SR). The
others have them in the following order
(SR,ER,FR). For the second case set
er-offset = <1>.
- unused-units : specifier consist of one cell. For each
bit in the cell, the corresponding bit
in CPM will be set to turn off unused
devices.
- idle-doze : specifier consist of one cell. For each
bit in the cell, the corresponding bit
in CPM will be set to turn off unused
devices. This is usually just CPM[CPU].
- standby : specifier consist of one cell. For each
bit in the cell, the corresponding bit
in CPM will be set on standby and
restored on resume.
- suspend : specifier consist of one cell. For each
bit in the cell, the corresponding bit
in CPM will be set on suspend (mem) and
restored on resume. Note, for standby
and suspend the corresponding bits can
be different or the same. Usually for
standby only class 2 and 3 units are set.
However, the interface does not care.
If they are the same, the additional
power saving will be seeing if support
is available to put the DDR in self
refresh mode and any additional power
saving techniques for the specific SoC.
Example:
CPM0: cpm {
compatible = "ibm,cpm";
dcr-access-method = "native";
dcr-reg = <0x160 0x003>;
er-offset = <0>;
unused-units = <0x00000100>;
idle-doze = <0x02000000>;
standby = <0xfeff0000>;
suspend = <0xfeff791d>;
};
......@@ -212,7 +212,7 @@ config ARCH_HIBERNATION_POSSIBLE
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
PPC_85xx || PPC_86xx || PPC_PSERIES
PPC_85xx || PPC_86xx || PPC_PSERIES || 44x || 40x
config PPC_DCR_NATIVE
bool
......@@ -598,13 +598,11 @@ config EXTRA_TARGETS
If unsure, leave blank
if !44x || BROKEN
config ARCH_WANTS_FREEZER_CONTROL
def_bool y
depends on ADB_PMU
source kernel/power/Kconfig
endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
......@@ -685,6 +683,15 @@ config FSL_PMC
Freescale MPC85xx/MPC86xx power management controller support
(suspend/resume). For MPC83xx see platforms/83xx/suspend.c
config PPC4xx_CPM
bool
default y
depends on SUSPEND && (44x || 40x)
help
PPC4xx Clock Power Management (CPM) support (suspend/resume).
It also enables support for two different idle states (idle-wait
and idle-doze).
config 4xx_SOC
bool
......
obj-$(CONFIG_44x) := misc_44x.o idle.o
obj-$(CONFIG_44x) += misc_44x.o
ifneq ($(CONFIG_PPC4xx_CPM),y)
obj-$(CONFIG_44x) += idle.o
endif
obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
......
......@@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o
obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
obj-$(CONFIG_CPM) += cpm_common.o
......
/*
* PowerPC 4xx Clock and Power Management
*
* Copyright (C) 2010, Applied Micro Circuits Corporation
* Victor Gallardo (vgallardo@apm.com)
*
* Based on arch/powerpc/platforms/44x/idle.c:
* Jerone Young <jyoung5@us.ibm.com>
* Copyright 2008 IBM Corp.
*
* Based on arch/powerpc/sysdev/fsl_pmc.c:
* Anton Vorontsov <avorontsov@ru.mvista.com>
* Copyright 2009 MontaVista Software, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/sysfs.h>
#include <linux/cpu.h>
#include <linux/suspend.h>
#include <asm/dcr.h>
#include <asm/dcr-native.h>
#include <asm/machdep.h>
#define CPM_ER 0
#define CPM_FR 1
#define CPM_SR 2
#define CPM_IDLE_WAIT 0
#define CPM_IDLE_DOZE 1
struct cpm {
dcr_host_t dcr_host;
unsigned int dcr_offset[3];
unsigned int powersave_off;
unsigned int unused;
unsigned int idle_doze;
unsigned int standby;
unsigned int suspend;
};
static struct cpm cpm;
struct cpm_idle_mode {
unsigned int enabled;
const char *name;
};
static struct cpm_idle_mode idle_mode[] = {
[CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
[CPM_IDLE_DOZE] = { 0, "doze" },
};
static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
{
unsigned int value;
/* CPM controller supports 3 different types of sleep interface
* known as class 1, 2 and 3. For class 1 units, they are
* unconditionally put to sleep when the corresponding CPM bit is
* set. For class 2 and 3 units this is not case; if they can be
* put to to sleep, they will. Here we do not verify, we just
* set them and expect them to eventually go off when they can.
*/
value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask);
/* return old state, to restore later if needed */
return value;
}
static void cpm_idle_wait(void)
{
unsigned long msr_save;
/* save off initial state */
msr_save = mfmsr();
/* sync required when CPM0_ER[CPU] is set */
mb();
/* set wait state MSR */
mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
isync();
/* return to initial state */
mtmsr(msr_save);
isync();
}
static void cpm_idle_sleep(unsigned int mask)
{
unsigned int er_save;
/* update CPM_ER state */
er_save = cpm_set(CPM_ER, mask);
/* go to wait state so that CPM0_ER[CPU] can take effect */
cpm_idle_wait();
/* restore CPM_ER state */
dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
}
static void cpm_idle_doze(void)
{
cpm_idle_sleep(cpm.idle_doze);
}
static void cpm_idle_config(int mode)
{
int i;
if (idle_mode[mode].enabled)
return;
for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
idle_mode[i].enabled = 0;
idle_mode[mode].enabled = 1;
}
static ssize_t cpm_idle_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
char *s = buf;
int i;
for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
if (idle_mode[i].enabled)
s += sprintf(s, "[%s] ", idle_mode[i].name);
else
s += sprintf(s, "%s ", idle_mode[i].name);
}
*(s-1) = '\n'; /* convert the last space to a newline */
return s - buf;
}
static ssize_t cpm_idle_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
int i;
char *p;
int len;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
if (strncmp(buf, idle_mode[i].name, len) == 0) {
cpm_idle_config(i);
return n;
}
}
return -EINVAL;
}
static struct kobj_attribute cpm_idle_attr =
__ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);
static void cpm_idle_config_sysfs(void)
{
struct sys_device *sys_dev;
unsigned long ret;
sys_dev = get_cpu_sysdev(0);
ret = sysfs_create_file(&sys_dev->kobj,
&cpm_idle_attr.attr);
if (ret)
printk(KERN_WARNING
"cpm: failed to create idle sysfs entry\n");
}
static void cpm_idle(void)
{
if (idle_mode[CPM_IDLE_DOZE].enabled)
cpm_idle_doze();
else
cpm_idle_wait();
}
static int cpm_suspend_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
return !!cpm.standby;
case PM_SUSPEND_MEM:
return !!cpm.suspend;
default:
return 0;
}
}
static void cpm_suspend_standby(unsigned int mask)
{
unsigned long tcr_save;
/* disable decrement interrupt */
tcr_save = mfspr(SPRN_TCR);
mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);
/* go to sleep state */
cpm_idle_sleep(mask);
/* restore decrement interrupt */
mtspr(SPRN_TCR, tcr_save);
}
static int cpm_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
cpm_suspend_standby(cpm.standby);
break;
case PM_SUSPEND_MEM:
cpm_suspend_standby(cpm.suspend);
break;
}
return 0;
}
static struct platform_suspend_ops cpm_suspend_ops = {
.valid = cpm_suspend_valid,
.enter = cpm_suspend_enter,
};
static int cpm_get_uint_property(struct device_node *np,
const char *name)
{
int len;
const unsigned int *prop = of_get_property(np, name, &len);
if (prop == NULL || len < sizeof(u32))
return 0;
return *prop;
}
static int __init cpm_init(void)
{
struct device_node *np;
int dcr_base, dcr_len;
int ret = 0;
if (!cpm.powersave_off) {
cpm_idle_config(CPM_IDLE_WAIT);
ppc_md.power_save = &cpm_idle;
}
np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
if (!np) {
ret = -EINVAL;
goto out;
}
dcr_base = dcr_resource_start(np, 0);
dcr_len = dcr_resource_len(np, 0);
if (dcr_base == 0 || dcr_len == 0) {
printk(KERN_ERR "cpm: could not parse dcr property for %s\n",
np->full_name);
ret = -EINVAL;
goto out;
}
cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
if (!DCR_MAP_OK(cpm.dcr_host)) {
printk(KERN_ERR "cpm: failed to map dcr property for %s\n",
np->full_name);
ret = -EINVAL;
goto out;
}
/* All 4xx SoCs with a CPM controller have one of two
* different order for the CPM registers. Some have the
* CPM registers in the following order (ER,FR,SR). The
* others have them in the following order (SR,ER,FR).
*/
if (cpm_get_uint_property(np, "er-offset") == 0) {
cpm.dcr_offset[CPM_ER] = 0;
cpm.dcr_offset[CPM_FR] = 1;
cpm.dcr_offset[CPM_SR] = 2;
} else {
cpm.dcr_offset[CPM_ER] = 1;
cpm.dcr_offset[CPM_FR] = 2;
cpm.dcr_offset[CPM_SR] = 0;
}
/* Now let's see what IPs to turn off for the following modes */
cpm.unused = cpm_get_uint_property(np, "unused-units");
cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
cpm.standby = cpm_get_uint_property(np, "standby");
cpm.suspend = cpm_get_uint_property(np, "suspend");
/* If some IPs are unused let's turn them off now */
if (cpm.unused) {
cpm_set(CPM_ER, cpm.unused);
cpm_set(CPM_FR, cpm.unused);
}
/* Now let's export interfaces */
if (!cpm.powersave_off && cpm.idle_doze)
cpm_idle_config_sysfs();
if (cpm.standby || cpm.suspend)
suspend_set_ops(&cpm_suspend_ops);
out:
if (np)
of_node_put(np);
return ret;
}
late_initcall(cpm_init);
static int __init cpm_powersave_off(char *arg)
{
cpm.powersave_off = 1;
return 0;
}
__setup("powersave=off", cpm_powersave_off);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册