提交 cc22b4c1 编写于 作者: R Rob Herring

ARM: set vga memory base at run-time

Convert the incorrectly named PCIMEM_BASE to a variable called vga_base.
This removes the dependency on mach/hardware.h.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
上级 c9d95fbe
......@@ -2,9 +2,10 @@
#define ASMARM_VGA_H
#include <linux/io.h>
#include <mach/hardware.h>
#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x))
extern unsigned long vga_base;
#define VGA_MAP_MEM(x,s) (vga_base + (x))
#define vga_readb(x) (*((volatile unsigned char *)x))
#define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x))
......
......@@ -11,9 +11,6 @@
#include "dove.h"
#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
/* Macros below are required for compatibility with PXA AC'97 driver. */
#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
DOVE_SB_REGS_VIRT_BASE)))
......
......@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
......@@ -228,6 +229,8 @@ static void __init add_pcie_port(int index, unsigned long base)
void __init dove_pcie_init(int init_port0, int init_port1)
{
vga_base = DOVE_PCIE0_MEM_PHYS_BASE;
if (init_port0)
add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
......
......@@ -296,6 +296,7 @@ void __init dc21285_preinit(void)
int cfn_mode;
pcibios_min_mem = 0x81000000;
vga_base = PCIMEM_BASE;
mem_size = (unsigned int)high_memory - PAGE_OFFSET;
for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
......
......@@ -32,8 +32,6 @@
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
#define PCIMEM_BASE PCI_MEMORY_VADDR
/* macro to get at IO space when running virtually */
#ifdef CONFIG_MMU
#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
......
......@@ -27,6 +27,7 @@
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/io.h>
#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
......@@ -504,6 +505,7 @@ void __init pci_v3_preinit(void)
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x00100000;
vga_base = PCI_MEMORY_VADDR;
/*
* Hook in our fault handler for PCI errors
......
......@@ -11,7 +11,4 @@
#include "kirkwood.h"
#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
#endif
......@@ -12,6 +12,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
......@@ -271,6 +272,8 @@ static void __init add_pcie_port(int index, unsigned long base)
void __init kirkwood_pcie_init(unsigned int portmask)
{
vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
if (portmask & KW_PCIE0)
add_pcie_port(0, PCIE_VIRT_BASE);
......
......@@ -11,7 +11,4 @@
#include "mv78xx0.h"
#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
#endif
......@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
......@@ -297,6 +298,8 @@ static void __init add_pcie_port(int maj, int min, unsigned long base)
void __init mv78xx0_pcie_init(int init_port0, int init_port1)
{
vga_base = MV78XX0_PCIE_MEM_PHYS_BASE;
if (init_port0) {
add_pcie_port(0, 0, PCIE00_VIRT_BASE);
if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
......
......@@ -11,7 +11,4 @@
#include "orion5x.h"
#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE
#endif
......@@ -560,6 +560,8 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
vga_base = ORION5X_PCIE_MEM_PHYS_BASE;
if (nr == 0) {
orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
ret = pcie_setup(sys);
......
......@@ -12,7 +12,5 @@
#define UNCACHEABLE_ADDR 0xdf010000
#define PCIMEM_BASE 0xe8000000
#endif
......@@ -8,6 +8,7 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
......@@ -42,6 +43,7 @@ static int __init shark_pci_init(void)
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x50000000;
vga_base = 0xe8000000;
pci_common_init(&shark_pci);
......
......@@ -9,6 +9,9 @@
#include <linux/ioport.h>
#include <linux/io.h>
unsigned long vga_base;
EXPORT_SYMBOL(vga_base);
#ifdef __io
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册