Merge tag 'imx-fixes-5.10-4' of...

Merge tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.10, round 4:

- Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch
  device work reliably.
- Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of
  the native CSPI_SSI function.
- Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match
  hardware datasheet.
- Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board.

* tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx50-evk: Fix the chip select 1 IOMUX
  arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point
  ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking
  arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy

Link: https://lore.kernel.org/r/20201116090702.GM5849@dragonSigned-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx50-evk.dts

@@ -59,7 +59,7 @@ MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
 				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
 				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
 				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl-udoo.dtsi

@@ -98,7 +98,7 @@ sound {
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -406,6 +406,9 @@ i2c@4 {
 	};
 };
 
+&mdio1 {
+	clock-frequency = <5000000>;
+};
 
 &iomuxc {
 	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -129,7 +129,7 @@ opp-1200000000 {
 
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <900000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xc>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;