提交 c96763d4 编写于 作者: R Robert Jarzmik 提交者: Eric Miao

[ARM] pxa/MioA701: discovered new gpio definitions.

The charger enable gpio is straight (1 means draw from USB
Vbus, 0 mean do not draw). The USB Vbus sensing is inverted
(1 means no Vbus voltage sensed, 0 means Vbus voltage
present).
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 a0361a8a
......@@ -10,12 +10,14 @@
(MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
/* Global GPIOs */
#define GPIO9_CHARGE_nEN 9
#define GPIO9_CHARGE_EN 9
#define GPIO18_POWEROFF 18
#define GPIO87_LCD_POWER 87
#define GPIO96_AC_DETECT 96
#define GPIO80_MAYBE_CHARGE_VDROP 80 /* Drop of 88mV */
/* USB */
#define GPIO13_USB_DETECT 13
#define GPIO13_nUSB_DETECT 13
#define GPIO22_USB_ENABLE 22
/* SDIO bits */
......@@ -24,7 +26,10 @@
#define GPIO91_SDIO_EN 91
/* Bluetooth */
#define GPIO14_BT_nACTIVITY 14
#define GPIO83_BT_ON 83
#define GPIO77_BT_UNKNOWN1 77
#define GPIO86_BT_MAYBE_nRESET 86
/* GPS */
#define GPIO23_GPS_UNKNOWN1 23
......
......@@ -57,10 +57,11 @@
static unsigned long mioa701_pin_config[] = {
/* Mio global */
MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
/* Backlight PWM 0 */
GPIO16_PWM0_OUT,
......@@ -77,7 +78,7 @@ static unsigned long mioa701_pin_config[] = {
MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
/* USB */
MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
/* LCD */
......@@ -116,11 +117,14 @@ static unsigned long mioa701_pin_config[] = {
GPIO85_CIF_LV,
/* Bluetooth */
MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
GPIO44_BTUART_CTS,
GPIO42_BTUART_RXD,
GPIO45_BTUART_RTS,
GPIO43_BTUART_TXD,
MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
/* GPS */
MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
......@@ -173,15 +177,11 @@ static unsigned long mioa701_pin_config[] = {
GPIO118_I2C_SDA,
/* Unknown */
MFP_CFG_IN(GPIO14, AF0),
MFP_CFG_IN(GPIO20, AF0),
MFP_CFG_IN(GPIO21, AF0),
MFP_CFG_IN(GPIO33, AF0),
MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO80, AF0),
MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
MFP_CFG_IN(GPIO96, AF0),
MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
};
......@@ -428,7 +428,7 @@ static void udc_power_command(int cmd)
static int is_usb_connected(void)
{
return !!gpio_get_value(GPIO13_USB_DETECT);
return !gpio_get_value(GPIO13_nUSB_DETECT);
}
static struct pxa2xx_udc_mach_info mioa701_udc_info = {
......@@ -682,7 +682,7 @@ static char *supplicants[] = {
static void mioa701_set_charge(int flags)
{
gpio_set_value(GPIO9_CHARGE_nEN, !flags);
gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
}
static struct pda_power_pdata power_pdata = {
......@@ -695,8 +695,8 @@ static struct pda_power_pdata power_pdata = {
static struct resource power_resources[] = {
[0] = {
.name = "ac",
.start = gpio_to_irq(GPIO13_USB_DETECT),
.end = gpio_to_irq(GPIO13_USB_DETECT),
.start = gpio_to_irq(GPIO13_nUSB_DETECT),
.end = gpio_to_irq(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
......@@ -908,7 +908,7 @@ static void mioa701_restart(char c)
}
struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册