未验证 提交 c7146a2b 编写于 作者: J Jaedon Shin 提交者: James Hogan

MIPS: BMIPS: Add Broadcom STB power management nodes

Adds power management nodes to BCM7xxx MIPS based SoCs.
Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17727/Signed-off-by: NJames Hogan <jhogan@kernel.org>
上级 cccd0b9a
......@@ -243,6 +243,17 @@ aon_pm_l2_intc: interrupt-controller@408440 {
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@4067c0 {
compatible = "brcm,brcmstb-timers";
reg = <0x4067c0 0x40>;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x60>;
......@@ -484,4 +495,38 @@ mspi: spi@408a00 {
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
};
......@@ -219,6 +219,17 @@ aon_pm_l2_intc: interrupt-controller@408440 {
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@406680 {
compatible = "brcm,brcmstb-timers";
reg = <0x406680 0x40>;
};
upg_gio: gpio@406500 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406500 0xa0>;
......@@ -403,4 +414,38 @@ mspi: spi@408a00 {
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
};
......@@ -215,6 +215,17 @@ aon_pm_l2_intc: interrupt-controller@408440 {
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@406680 {
compatible = "brcm,brcmstb-timers";
reg = <0x406680 0x40>;
};
upg_gio: gpio@406500 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406500 0xa0>;
......@@ -399,4 +410,38 @@ mspi: spi@408a00 {
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
};
......@@ -242,6 +242,17 @@ aon_pm_l2_intc: interrupt-controller@408440 {
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@4067c0 {
compatible = "brcm,brcmstb-timers";
reg = <0x4067c0 0x40>;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
......@@ -495,4 +506,65 @@ mspi: spi@409200 {
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0x1a000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
memory-controller@1 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x10000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
};
......@@ -257,6 +257,17 @@ aon_pm_l2_intc: interrupt-controller@408440 {
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@4067c0 {
compatible = "brcm,brcmstb-timers";
reg = <0x4067c0 0x40>;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
......@@ -510,4 +521,65 @@ mspi: spi@409200 {
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0x1a000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
memory-controller@1 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x10000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册