wl12xx: Use a single fw for both STA and AP roles

Firmware >= 6/7.3.0.0.75 (wl127x/wl128x) supports both
STA and AP roles.
Signed-off-by: NArik Nemtsov <arik@wizery.com>
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/main.c

@@ -1043,25 +1043,10 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 	const char *fw_name;
 	int ret;
 
-	switch (wl->bss_type) {
-	case BSS_TYPE_AP_BSS:
-		if (wl->chip.id == CHIP_ID_1283_PG20)
-			fw_name = WL128X_AP_FW_NAME;
-		else
-			fw_name = WL127X_AP_FW_NAME;
-		break;
-	case BSS_TYPE_IBSS:
-	case BSS_TYPE_STA_BSS:
-		if (wl->chip.id == CHIP_ID_1283_PG20)
-			fw_name = WL128X_FW_NAME;
-		else
-			fw_name	= WL1271_FW_NAME;
-		break;
-	default:
-		wl1271_error("no compatible firmware for bss_type %d",
-			     wl->bss_type);
-		return -EINVAL;
-	}
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		fw_name = WL128X_FW_NAME;
+	else
+		fw_name	= WL127X_FW_NAME;
 
 	wl1271_debug(DEBUG_BOOT, "booting firmware %s", fw_name);
 
@@ -1090,7 +1075,6 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 	}
 
 	memcpy(wl->fw, fw->data, wl->fw_len);
-	wl->fw_bss_type = wl->bss_type;
 	ret = 0;
 
 out:
@@ -1361,8 +1345,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		goto out;
 	}
 
-	/* Make sure the firmware type matches the BSS type */
-	if (wl->fw == NULL || wl->fw_bss_type != wl->bss_type) {
+	if (wl->fw == NULL) {
 		ret = wl1271_fetch_firmware(wl);
 		if (ret < 0)
 			goto out;
@@ -1796,9 +1779,6 @@ static int wl1271_op_start(struct ieee80211_hw *hw)
 	 *
 	 * The MAC address is first known when the corresponding interface
 	 * is added. That is where we will initialize the hardware.
-	 *
-	 * In addition, we currently have different firmwares for AP and managed
-	 * operation. We will know which to boot according to interface type.
 	 */
 
 	return 0;
@@ -4393,7 +4373,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->hw_pg_ver = -1;
 	wl->bss_type = MAX_BSS_TYPE;
 	wl->set_bss_type = MAX_BSS_TYPE;
-	wl->fw_bss_type = MAX_BSS_TYPE;
 	wl->last_tx_hlid = 0;
 	wl->ap_ps_map = 0;
 	wl->ap_fw_ps_map = 0;

drivers/net/wireless/wl12xx/sdio.c

@@ -412,7 +412,5 @@ module_exit(wl1271_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
-MODULE_FIRMWARE(WL1271_FW_NAME);
+MODULE_FIRMWARE(WL127X_FW_NAME);
 MODULE_FIRMWARE(WL128X_FW_NAME);
-MODULE_FIRMWARE(WL127X_AP_FW_NAME);
-MODULE_FIRMWARE(WL128X_AP_FW_NAME);

drivers/net/wireless/wl12xx/spi.c

@@ -486,8 +486,6 @@ module_exit(wl1271_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
-MODULE_FIRMWARE(WL1271_FW_NAME);
+MODULE_FIRMWARE(WL127X_FW_NAME);
 MODULE_FIRMWARE(WL128X_FW_NAME);
-MODULE_FIRMWARE(WL127X_AP_FW_NAME);
-MODULE_FIRMWARE(WL128X_AP_FW_NAME);
 MODULE_ALIAS("spi:wl1271");

drivers/net/wireless/wl12xx/wl12xx.h

@@ -130,10 +130,8 @@ extern u32 wl12xx_debug_level;
 
 
 
-#define WL1271_FW_NAME "ti-connectivity/wl1271-fw-2.bin"
-#define WL128X_FW_NAME "ti-connectivity/wl128x-fw.bin"
-#define WL127X_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
-#define WL128X_AP_FW_NAME "ti-connectivity/wl128x-fw-ap.bin"
+#define WL127X_FW_NAME "ti-connectivity/wl127x-fw-3.bin"
+#define WL128X_FW_NAME "ti-connectivity/wl128x-fw-3.bin"
 
 /*
  * wl127x and wl128x are using the same NVS file name. However, the
@@ -405,7 +403,6 @@ struct wl1271 {
 
 	u8 *fw;
 	size_t fw_len;
-	u8 fw_bss_type;
 	void *nvs;
 	size_t nvs_len;