pcm037/pcm043/pca100: fix ULPI-related build warnings

Like this one (if CONFIG_USB_ULPI is not set):

arch/arm/mach-mx3/mach-pcm043.c:312: warning: 'otg_pdata' defined but not used
arch/arm/mach-mx3/mach-pcm043.c:317: warning: 'usbh1_pdata' defined but not used
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

arch/arm/mach-mx2/mach-pca100.c

@@ -253,6 +253,7 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -276,6 +277,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,

arch/arm/mach-mx3/mach-pcm037.c

@@ -545,6 +545,7 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -554,6 +555,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,

arch/arm/mach-mx3/mach-pcm043.c

@@ -309,6 +309,7 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -319,6 +320,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,